| Message ID | 1454792331-4435-2-git-send-email-f.fainelli@gmail.com |
|---|---|
| State | Accepted, archived |
| Delegated to: | David Miller |
| Headers | show |
diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index bf241a3..234a285 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -270,7 +270,7 @@ static int bcm7xxx_config_init(struct phy_device *phydev) phy_write(phydev, MII_BCM7XXX_100TX_FALSE_CAR, 0x7555); /* reset shadow mode 2 */ - ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, MII_BCM7XXX_SHD_MODE_2, 0); + ret = phy_set_clr_bits(phydev, MII_BCM7XXX_TEST, 0, MII_BCM7XXX_SHD_MODE_2); if (ret < 0) return ret;
The clear and set masks in the call to phy_set_clr_bits() called from bcm7xxx_config_init() are inverted. We need to fix this by swapping the two arguments, that is, set 0 bits, but clear the shade mode 2 enable bit. Fixes: b560a58c45c66 ("net: phy: add Broadcom BCM7xxx internal PHY driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- drivers/net/phy/bcm7xxx.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)