| Message ID | 1454697741-8687-3-git-send-email-contact@paulk.fr |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Fri, Feb 05, 2016 at 07:42:19PM +0100, Paul Kocialkowski wrote: > LP872x regulators are made active via the EN pin, which might be hooked to a > GPIO. This adds support for driving the GPIO high when the driver is in use. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > .../devicetree/bindings/regulator/lp872x.txt | 1 + Acked-by: Rob Herring <robh@kernel.org> > drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++ > include/linux/regulator/lp872x.h | 5 ++++ > 3 files changed, 40 insertions(+) -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Paul, Thanks for the patch. Please see my comments below. On 2/6/2016 3:42 AM, Paul Kocialkowski wrote: > LP872x regulators are made active via the EN pin, which might be hooked to a > GPIO. This adds support for driving the GPIO high when the driver is in use. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > .../devicetree/bindings/regulator/lp872x.txt | 1 + > drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++ > include/linux/regulator/lp872x.h | 5 ++++ > 3 files changed, 40 insertions(+) > > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt > index 7818318..ca58a68 100644 > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt > @@ -28,6 +28,7 @@ Optional properties: > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. > + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. > > Sub nodes for regulator_init_data > LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) > diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c > index 21c49d8..3899211 100644 > --- a/drivers/regulator/lp872x.c > +++ b/drivers/regulator/lp872x.c > @@ -15,6 +15,7 @@ > #include <linux/regmap.h> > #include <linux/err.h> > #include <linux/gpio.h> > +#include <linux/delay.h> > #include <linux/regulator/lp872x.h> > #include <linux/regulator/driver.h> > #include <linux/platform_device.h> > @@ -757,6 +758,33 @@ set_default_dvs_mode: > default_dvs_mode[lp->chipid]); > } > > +static int lp872x_hw_enable(struct lp872x *lp) > +{ > + int ret, gpio; > + > + if (!lp->pdata) > + return -EINVAL; > + > + gpio = lp->pdata->enable_gpio; > + if (!gpio_is_valid(gpio)) > + return 0; It seems gpio is always 0 when it starts from DT. 'enable_gpio' is updated in lp872x_config() but lp872x_hw_enable() is called first. > + > + /* Always set enable GPIO high. */ > + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); > + if (ret) { > + dev_err(lp->dev, "gpio request err: %d\n", ret); > + return ret; > + } > + > + /* Each chip has a different enable delay. */ > + if (lp->chipid == LP8720) > + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); > + else > + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); > + > + return 0; > +} > + > static int lp872x_config(struct lp872x *lp) > { > struct lp872x_platform_data *pdata = lp->pdata; > @@ -875,6 +903,8 @@ static struct lp872x_platform_data > of_property_read_u8(np, "ti,dvs-state", &dvs_state); > pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; > > + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); Please move this code to lp872x_populate_pdata_from_dt(). lp872x_hw_enable() is called prior to lp872x_config(), so enable_gpio should be set on parsing the DT properties. > + > if (of_get_child_count(np) == 0) > goto out; > > @@ -948,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) > lp->chipid = id->driver_data; > i2c_set_clientdata(cl, lp); > > + ret = lp872x_hw_enable(lp); > + if (ret) > + return ret; > + > ret = lp872x_config(lp); > if (ret) > return ret; > diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h > index 132e05c..6029279 100644 > --- a/include/linux/regulator/lp872x.h > +++ b/include/linux/regulator/lp872x.h > @@ -18,6 +18,9 @@ > > #define LP872X_MAX_REGULATORS 9 > > +#define LP8720_ENABLE_DELAY 200 > +#define LP8725_ENABLE_DELAY 30000 > + > enum lp872x_regulator_id { > LP8720_ID_BASE, > LP8720_ID_LDO1 = LP8720_ID_BASE, > @@ -79,12 +82,14 @@ struct lp872x_regulator_data { > * @update_config : if LP872X_GENERAL_CFG register is updated, set true > * @regulator_data : platform regulator id and init data > * @dvs : dvs data for buck voltage control > + * @enable_gpio : gpio pin number for enable control > */ > struct lp872x_platform_data { > u8 general_config; > bool update_config; > struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; > struct lp872x_dvs *dvs; > + int enable_gpio; > }; > > #endif > Best regards, Milo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, Le vendredi 12 février 2016 à 09:14 +0900, Kim, Milo a écrit : > Thanks for the patch. Please see my comments below. Thanks for the review! > On 2/6/2016 3:42 AM, Paul Kocialkowski wrote: > > LP872x regulators are made active via the EN pin, which might be hooked to a > > GPIO. This adds support for driving the GPIO high when the driver is in use. > > > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > > --- > > .../devicetree/bindings/regulator/lp872x.txt | 1 + > > drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++ > > include/linux/regulator/lp872x.h | 5 ++++ > > 3 files changed, 40 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt > > index 7818318..ca58a68 100644 > > --- a/Documentation/devicetree/bindings/regulator/lp872x.txt > > +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt > > @@ -28,6 +28,7 @@ Optional properties: > > - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. > > - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. > > - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. > > + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. > > > > Sub nodes for regulator_init_data > > LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) > > diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c > > index 21c49d8..3899211 100644 > > --- a/drivers/regulator/lp872x.c > > +++ b/drivers/regulator/lp872x.c > > @@ -15,6 +15,7 @@ > > #include <linux/regmap.h> > > #include <linux/err.h> > > #include <linux/gpio.h> > > +#include <linux/delay.h> > > #include <linux/regulator/lp872x.h> > > #include <linux/regulator/driver.h> > > #include <linux/platform_device.h> > > @@ -757,6 +758,33 @@ set_default_dvs_mode: > > default_dvs_mode[lp->chipid]); > > } > > > > +static int lp872x_hw_enable(struct lp872x *lp) > > +{ > > + int ret, gpio; > > + > > + if (!lp->pdata) > > + return -EINVAL; > > + > > + gpio = lp->pdata->enable_gpio; > > + if (!gpio_is_valid(gpio)) > > + return 0; > > It seems gpio is always 0 when it starts from DT. 'enable_gpio' is > updated in lp872x_config() but lp872x_hw_enable() is called first. Actually, enable_gpio is updated in lp872x_populate_pdata_from_dt. > > + > > + /* Always set enable GPIO high. */ > > + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); > > + if (ret) { > > + dev_err(lp->dev, "gpio request err: %d\n", ret); > > + return ret; > > + } > > + > > + /* Each chip has a different enable delay. */ > > + if (lp->chipid == LP8720) > > + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); > > + else > > + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); > > + > > + return 0; > > +} > > + > > static int lp872x_config(struct lp872x *lp) > > { > > struct lp872x_platform_data *pdata = lp->pdata; > > @@ -875,6 +903,8 @@ static struct lp872x_platform_data > > of_property_read_u8(np, "ti,dvs-state", &dvs_state); > > pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; > > > > + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); > > Please move this code to lp872x_populate_pdata_from_dt(). This already adds it in lp872x_populate_pdata_from_dt (see the context around the insertion). I don't know why the diff makes it seem like it's added in lp872x_config. It's really not. > lp872x_hw_enable() is called prior to lp872x_config(), so enable_gpio > should be set on parsing the DT properties. Of course. > > + > > if (of_get_child_count(np) == 0) > > goto out; > > > > @@ -948,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) > > lp->chipid = id->driver_data; > > i2c_set_clientdata(cl, lp); > > > > + ret = lp872x_hw_enable(lp); > > + if (ret) > > + return ret; > > + > > ret = lp872x_config(lp); > > if (ret) > > return ret; > > diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h > > index 132e05c..6029279 100644 > > --- a/include/linux/regulator/lp872x.h > > +++ b/include/linux/regulator/lp872x.h > > @@ -18,6 +18,9 @@ > > > > #define LP872X_MAX_REGULATORS 9 > > > > +#define LP8720_ENABLE_DELAY 200 > > +#define LP8725_ENABLE_DELAY 30000 > > + > > enum lp872x_regulator_id { > > LP8720_ID_BASE, > > LP8720_ID_LDO1 = LP8720_ID_BASE, > > @@ -79,12 +82,14 @@ struct lp872x_regulator_data { > > * @update_config : if LP872X_GENERAL_CFG register is updated, set true > > * @regulator_data : platform regulator id and init data > > * @dvs : dvs data for buck voltage control > > + * @enable_gpio : gpio pin number for enable control > > */ > > struct lp872x_platform_data { > > u8 general_config; > > bool update_config; > > struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; > > struct lp872x_dvs *dvs; > > + int enable_gpio; > > }; > > > > #endif > > > > Best regards, > Milo
On 2/13/2016 3:25 AM, Paul Kocialkowski wrote: >>> > >+ >>> > >+ /* Always set enable GPIO high. */ >>> > >+ ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); >>> > >+ if (ret) { >>> > >+ dev_err(lp->dev, "gpio request err: %d\n", ret); >>> > >+ return ret; >>> > >+ } >>> > >+ >>> > >+ /* Each chip has a different enable delay. */ >>> > >+ if (lp->chipid == LP8720) >>> > >+ usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); >>> > >+ else >>> > >+ usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); >>> > >+ >>> > >+ return 0; >>> > >+} >>> > >+ >>> > > static int lp872x_config(struct lp872x *lp) >>> > > { >>> > > struct lp872x_platform_data *pdata = lp->pdata; >>> > >@@ -875,6 +903,8 @@ static struct lp872x_platform_data >>> > > of_property_read_u8(np, "ti,dvs-state", &dvs_state); >>> > > pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; >>> > > >>> > >+ pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); >> > >> >Please move this code to lp872x_populate_pdata_from_dt(). > This already adds it in lp872x_populate_pdata_from_dt (see the context > around the insertion). Ah, sorry. Your patch is correct. > I don't know why the diff makes it seem like it's added in > lp872x_config. It's really not. I think it was from a line break of lp872x_populate_pdata_from_dt(). Let me add my ACK to this patch. Thank you. Best regards, Milo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2/6/2016 3:42 AM, Paul Kocialkowski wrote: > LP872x regulators are made active via the EN pin, which might be hooked to a > GPIO. This adds support for driving the GPIO high when the driver is in use. > > Signed-off-by: Paul Kocialkowski <contact@paulk.fr> > --- > .../devicetree/bindings/regulator/lp872x.txt | 1 + > drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++ > include/linux/regulator/lp872x.h | 5 ++++ > 3 files changed, 40 insertions(+) Acked-by: Milo Kim <milo.kim@ti.com> Best regards, Milo -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/regulator/lp872x.txt b/Documentation/devicetree/bindings/regulator/lp872x.txt index 7818318..ca58a68 100644 --- a/Documentation/devicetree/bindings/regulator/lp872x.txt +++ b/Documentation/devicetree/bindings/regulator/lp872x.txt @@ -28,6 +28,7 @@ Optional properties: - ti,dvs-gpio: GPIO specifier for external DVS pin control of LP872x devices. - ti,dvs-vsel: DVS selector. 0 = SEL_V1, 1 = SEL_V2. - ti,dvs-state: initial DVS pin state. 0 = DVS_LOW, 1 = DVS_HIGH. + - enable-gpios: GPIO specifier for EN pin control of LP872x devices. Sub nodes for regulator_init_data LP8720 has maximum 6 nodes. (child name: ldo1 ~ 5 and buck) diff --git a/drivers/regulator/lp872x.c b/drivers/regulator/lp872x.c index 21c49d8..3899211 100644 --- a/drivers/regulator/lp872x.c +++ b/drivers/regulator/lp872x.c @@ -15,6 +15,7 @@ #include <linux/regmap.h> #include <linux/err.h> #include <linux/gpio.h> +#include <linux/delay.h> #include <linux/regulator/lp872x.h> #include <linux/regulator/driver.h> #include <linux/platform_device.h> @@ -757,6 +758,33 @@ set_default_dvs_mode: default_dvs_mode[lp->chipid]); } +static int lp872x_hw_enable(struct lp872x *lp) +{ + int ret, gpio; + + if (!lp->pdata) + return -EINVAL; + + gpio = lp->pdata->enable_gpio; + if (!gpio_is_valid(gpio)) + return 0; + + /* Always set enable GPIO high. */ + ret = devm_gpio_request_one(lp->dev, gpio, GPIOF_OUT_INIT_HIGH, "LP872X EN"); + if (ret) { + dev_err(lp->dev, "gpio request err: %d\n", ret); + return ret; + } + + /* Each chip has a different enable delay. */ + if (lp->chipid == LP8720) + usleep_range(LP8720_ENABLE_DELAY, 1.5 * LP8720_ENABLE_DELAY); + else + usleep_range(LP8725_ENABLE_DELAY, 1.5 * LP8725_ENABLE_DELAY); + + return 0; +} + static int lp872x_config(struct lp872x *lp) { struct lp872x_platform_data *pdata = lp->pdata; @@ -875,6 +903,8 @@ static struct lp872x_platform_data of_property_read_u8(np, "ti,dvs-state", &dvs_state); pdata->dvs->init_state = dvs_state ? DVS_HIGH : DVS_LOW; + pdata->enable_gpio = of_get_named_gpio(np, "enable-gpios", 0); + if (of_get_child_count(np) == 0) goto out; @@ -948,6 +978,10 @@ static int lp872x_probe(struct i2c_client *cl, const struct i2c_device_id *id) lp->chipid = id->driver_data; i2c_set_clientdata(cl, lp); + ret = lp872x_hw_enable(lp); + if (ret) + return ret; + ret = lp872x_config(lp); if (ret) return ret; diff --git a/include/linux/regulator/lp872x.h b/include/linux/regulator/lp872x.h index 132e05c..6029279 100644 --- a/include/linux/regulator/lp872x.h +++ b/include/linux/regulator/lp872x.h @@ -18,6 +18,9 @@ #define LP872X_MAX_REGULATORS 9 +#define LP8720_ENABLE_DELAY 200 +#define LP8725_ENABLE_DELAY 30000 + enum lp872x_regulator_id { LP8720_ID_BASE, LP8720_ID_LDO1 = LP8720_ID_BASE, @@ -79,12 +82,14 @@ struct lp872x_regulator_data { * @update_config : if LP872X_GENERAL_CFG register is updated, set true * @regulator_data : platform regulator id and init data * @dvs : dvs data for buck voltage control + * @enable_gpio : gpio pin number for enable control */ struct lp872x_platform_data { u8 general_config; bool update_config; struct lp872x_regulator_data regulator_data[LP872X_MAX_REGULATORS]; struct lp872x_dvs *dvs; + int enable_gpio; }; #endif
LP872x regulators are made active via the EN pin, which might be hooked to a GPIO. This adds support for driving the GPIO high when the driver is in use. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> --- .../devicetree/bindings/regulator/lp872x.txt | 1 + drivers/regulator/lp872x.c | 34 ++++++++++++++++++++++ include/linux/regulator/lp872x.h | 5 ++++ 3 files changed, 40 insertions(+)