diff mbox

[U-Boot,2/2] armv8: ls2080: Update bootcmd env variable

Message ID 1454499247-1675-1-git-send-email-prabhakar.kushwaha@nxp.com
State Accepted
Delegated to: York Sun
Headers show

Commit Message

Prabhakar Kushwaha Feb. 3, 2016, 11:34 a.m. UTC 
Before Linux boot DPL must be deployed to DPAA2 interface.
So update bootcmd env variable to make sure DPL deployment before
Linux boot.

Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
---
 include/configs/ls2080a_common.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

York Sun Feb. 24, 2016, 4:49 p.m. UTC | #1 
On 02/03/2016 03:34 AM, Prabhakar Kushwaha wrote:
> Before Linux boot DPL must be deployed to DPAA2 interface.
> So update bootcmd env variable to make sure DPL deployment before
> Linux boot.
> 
> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
> ---
>  include/configs/ls2080a_common.h | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 

Applied to fsl-qoriq master. Awaiting upstream.

York
diff mbox

Patch

diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 0d33042..091c9e1 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -272,8 +272,9 @@  unsigned long long get_qixis_addr(void);
 				"earlycon=uart8250,mmio,0x21c0500" \
 				"ramdisk_size=0x2000000 default_hugepagesz=2m" \
 				" hugepagesz=2m hugepages=16"
-#define CONFIG_BOOTCOMMAND		"cp.b $kernel_start $kernel_load "     \
-					"$kernel_size && bootm $kernel_load"
+#define CONFIG_BOOTCOMMAND	"fsl_mc apply dpl 0x580700000 &&" \
+				" cp.b $kernel_start $kernel_load" \
+				" $kernel_size && bootm $kernel_load"
 #define CONFIG_BOOTDELAY		10
 
 /* Monitor Command Prompt */