diff mbox

[v5,2/5] util: Use new error_report_fatal/abort instead of error_setg(&error_fatal/abort)

Message ID 145401802305.13643.16884320385969020316.stgit@localhost
State New
Headers show

Commit Message

Lluís Vilanova Jan. 28, 2016, 9:53 p.m. UTC
Replaces all direct uses of 'error_setg(&error_fatal/abort)' with
'error_report_fatal/abort'. Also reimplements the former on top of the
latter.

Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
---
 hw/block/fdc.c     |    6 +++---
 hw/ppc/spapr.c     |    8 ++++----
 hw/ppc/spapr_drc.c |    2 +-
 util/error.c       |    9 +++------
 4 files changed, 11 insertions(+), 14 deletions(-)

Comments

David Gibson Jan. 29, 2016, 5:30 a.m. UTC | #1
On Thu, Jan 28, 2016 at 10:53:43PM +0100, Lluís Vilanova wrote:
> Replaces all direct uses of 'error_setg(&error_fatal/abort)' with
> 'error_report_fatal/abort'. Also reimplements the former on top of the
> latter.
> 
> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>

I think the spapr parts of this will be obsoleted by the cleanups to
error handling included in the pull request I sent today.
Lluís Vilanova Jan. 29, 2016, 1:33 p.m. UTC | #2
David Gibson writes:

> On Thu, Jan 28, 2016 at 10:53:43PM +0100, Lluís Vilanova wrote:
>> Replaces all direct uses of 'error_setg(&error_fatal/abort)' with
>> 'error_report_fatal/abort'. Also reimplements the former on top of the
>> latter.
>> 
>> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>

> I think the spapr parts of this will be obsoleted by the cleanups to
> error handling included in the pull request I sent today.

Ok, then I'll rebase once merged. Is there an ETA for the merge?

Thanks,
  Lluis
David Gibson Jan. 31, 2016, 5:59 a.m. UTC | #3
On Fri, Jan 29, 2016 at 02:33:08PM +0100, Lluís Vilanova wrote:
> David Gibson writes:
> 
> > On Thu, Jan 28, 2016 at 10:53:43PM +0100, Lluís Vilanova wrote:
> >> Replaces all direct uses of 'error_setg(&error_fatal/abort)' with
> >> 'error_report_fatal/abort'. Also reimplements the former on top of the
> >> latter.
> >> 
> >> Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
> 
> > I think the spapr parts of this will be obsoleted by the cleanups to
> > error handling included in the pull request I sent today.
> 
> Ok, then I'll rebase once merged. Is there an ETA for the merge?

Well, I'd been hoping a couple of days ago, but there were some
mistakes in the last pull request, so.. sometime this week, I hope?
diff mbox

Patch

diff --git a/hw/block/fdc.c b/hw/block/fdc.c
index e3b0e1e..8f0c947 100644
--- a/hw/block/fdc.c
+++ b/hw/block/fdc.c
@@ -347,9 +347,9 @@  static int pick_geometry(FDrive *drv)
 
     /* No match of any kind found -- fd_format is misconfigured, abort. */
     if (match == -1) {
-        error_setg(&error_abort, "No candidate geometries present in table "
-                   " for floppy drive type '%s'",
-                   FloppyDriveType_lookup[drv->drive]);
+        error_report_abort("No candidate geometries present in table "
+                           " for floppy drive type '%s'",
+                           FloppyDriveType_lookup[drv->drive]);
     }
 
     parse = &(fd_formats[match]);
diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
index 50e5a26..a5afea1 100644
--- a/hw/ppc/spapr.c
+++ b/hw/ppc/spapr.c
@@ -1031,7 +1031,7 @@  static void spapr_alloc_htab(sPAPRMachineState *spapr)
          * For HV KVM, host kernel will return -ENOMEM when requested
          * HTAB size can't be allocated.
          */
-        error_setg(&error_abort, "Failed to allocate HTAB of requested size, try with smaller maxmem");
+        error_report_abort("Failed to allocate HTAB of requested size, try with smaller maxmem");
     } else if (shift > 0) {
         /*
          * Kernel handles htab, we don't need to allocate one
@@ -1040,7 +1040,7 @@  static void spapr_alloc_htab(sPAPRMachineState *spapr)
          * but we don't allow booting of such guests.
          */
         if (shift != spapr->htab_shift) {
-            error_setg(&error_abort, "Failed to allocate HTAB of requested size, try with smaller maxmem");
+            error_report_abort("Failed to allocate HTAB of requested size, try with smaller maxmem");
         }
 
         spapr->htab_shift = shift;
@@ -1071,10 +1071,10 @@  static void spapr_reset_htab(sPAPRMachineState *spapr)
 
     shift = kvmppc_reset_htab(spapr->htab_shift);
     if (shift < 0) {
-        error_setg(&error_abort, "Failed to reset HTAB");
+        error_report_abort("Failed to reset HTAB");
     } else if (shift > 0) {
         if (shift != spapr->htab_shift) {
-            error_setg(&error_abort, "Requested HTAB allocation failed during reset");
+            error_report_abort("Requested HTAB allocation failed during reset");
         }
 
         /* Tell readers to update their file descriptor */
diff --git a/hw/ppc/spapr_drc.c b/hw/ppc/spapr_drc.c
index dccb908..0d8f5b4 100644
--- a/hw/ppc/spapr_drc.c
+++ b/hw/ppc/spapr_drc.c
@@ -322,7 +322,7 @@  static void prop_get_fdt(Object *obj, Visitor *v, void *opaque,
             break;
         }
         default:
-            error_setg(&error_abort, "device FDT in unexpected state: %d", tag);
+            error_report_abort("device FDT in unexpected state: %d", tag);
         }
         fdt_offset = fdt_offset_next;
     } while (fdt_depth != 0);
diff --git a/util/error.c b/util/error.c
index 57303fd..b8a9120 100644
--- a/util/error.c
+++ b/util/error.c
@@ -30,15 +30,12 @@  Error *error_fatal;
 
 static void error_handle_fatal(Error **errp, Error *err)
 {
+    /* None of them has a hint, so error_report_err() is not necessary here */
     if (errp == &error_abort) {
-        fprintf(stderr, "Unexpected error in %s() at %s:%d:\n",
-                err->func, err->src, err->line);
-        error_report_err(err);
-        abort();
+        error_report_abort_internal("%s", err->msg);
     }
     if (errp == &error_fatal) {
-        error_report_err(err);
-        exit(1);
+        error_report_fatal("%s", err->msg);
     }
 }