diff mbox

[U-Boot] sunxi: Add support for Cubietruck Plus

Message ID 1453883684-2447-2-git-send-email-wens@csie.org
State Accepted
Delegated to: Hans de Goede
Headers show

Commit Message

Chen-Yu Tsai Jan. 27, 2016, 8:34 a.m. UTC 
Cubietruck Plus is a A83T/H8 based development board. The board has
standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
WiFi, headphone out / mic in, and various GPIO headers.

The board also has an EEPROM on i2c0 which holds the MAC address.

DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20
is connected to the reset control of the PHY. EMAC is not actually
supported yet.

The DTS is the same as the one already in the kernel.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 arch/arm/dts/Makefile                       |  1 +
 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65 +++++++++++++++++++++++++++++
 configs/Cubietruck_plus_defconfig           | 18 ++++++++
 3 files changed, 84 insertions(+)
 create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
 create mode 100644 configs/Cubietruck_plus_defconfig

Comments

Dennis Gilmore March 19, 2016, 10:43 p.m. UTC | #1 
Hans,

What is the status of this patch?

Dennis

On Wednesday, January 27, 2016 4:34:44 PM CDT Chen-Yu Tsai wrote:
> Cubietruck Plus is a A83T/H8 based development board. The board has
> standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
> via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
> WiFi, headphone out / mic in, and various GPIO headers.
> 
> The board also has an EEPROM on i2c0 which holds the MAC address.
> 
> DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20
> is connected to the reset control of the PHY. EMAC is not actually
> supported yet.
> 
> The DTS is the same as the one already in the kernel.
> 
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> ---
>  arch/arm/dts/Makefile                       |  1 +
>  arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65
> +++++++++++++++++++++++++++++ configs/Cubietruck_plus_defconfig           |
> 18 ++++++++
>  3 files changed, 84 insertions(+)
>  create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
>  create mode 100644 configs/Cubietruck_plus_defconfig
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 1c7d359..e338db5 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -184,6 +184,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
>  	sun8i-a33-sinlinx-sina33.dtb
>  dtb-$(CONFIG_MACH_SUN8I_A83T) += \
>  	sun8i-a83t-allwinner-h8homlet-v2.dtb \
> +	sun8i-a83t-cubietruck-plus.dtb \
>  	sun8i-a83t-sinovoip-bpi-m3.dtb
>  dtb-$(CONFIG_MACH_SUN8I_H3) += \
>  	sun8i-h3-orangepi-pc.dtb \
> diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644
> index 0000000..88b1e09
> --- /dev/null
> +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> @@ -0,0 +1,65 @@
> +/*
> + * Copyright 2015 Chen-Yu Tsai
> + *
> + * Chen-Yu Tsai <wens@csie.org>
> + *
> + * This file is dual-licensed: you can use it either under the terms
> + * of the GPL or the X11 license, at your option. Note that this dual
> + * licensing only applies to this file, and not this project as a
> + * whole.
> + *
> + *  a) This file is free software; you can redistribute it and/or
> + *     modify it under the terms of the GNU General Public License as
> + *     published by the Free Software Foundation; either version 2 of the
> + *     License, or (at your option) any later version.
> + *
> + *     This file is distributed in the hope that it will be useful,
> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + *     GNU General Public License for more details.
> + *
> + * Or, alternatively,
> + *
> + *  b) Permission is hereby granted, free of charge, to any person
> + *     obtaining a copy of this software and associated documentation
> + *     files (the "Software"), to deal in the Software without
> + *     restriction, including without limitation the rights to use,
> + *     copy, modify, merge, publish, distribute, sublicense, and/or
> + *     sell copies of the Software, and to permit persons to whom the
> + *     Software is furnished to do so, subject to the following
> + *     conditions:
> + *
> + *     The above copyright notice and this permission notice shall be
> + *     included in all copies or substantial portions of the Software.
> + *
> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> + *     OTHER DEALINGS IN THE SOFTWARE.
> + */
> +
> +/dts-v1/;
> +#include "sun8i-a83t.dtsi"
> +
> +/ {
> +	model = "Cubietech Cubietruck Plus";
> +	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +};
> +
> +&uart0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart0_pins_b>;
> +	status = "okay";
> +};
> diff --git a/configs/Cubietruck_plus_defconfig
> b/configs/Cubietruck_plus_defconfig new file mode 100644
> index 0000000..bb0b336
> --- /dev/null
> +++ b/configs/Cubietruck_plus_defconfig
> @@ -0,0 +1,18 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_SUNXI=y
> +CONFIG_MACH_SUN8I_A83T=y
> +CONFIG_DRAM_CLK=672
> +CONFIG_DRAM_ZQ=15355
> +CONFIG_DRAM_ODT_EN=y
> +CONFIG_MMC0_CD_PIN="PF6"
> +CONFIG_I2C0_ENABLE=y
> +CONFIG_AXP_GPIO=y
> +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> +CONFIG_SPL=y
> +CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_FPGA is not set
> +CONFIG_AXP_DLDO3_VOLT=2500
> +CONFIG_AXP_DLDO4_VOLT=3300
Dennis Gilmore March 19, 2016, 11:34 p.m. UTC | #2 
On Saturday, March 19, 2016 5:43:52 PM CDT Dennis Gilmore wrote:
> Hans,
> 
> What is the status of this patch?
> 
> Dennis

With the patch applied building for Cubietruck_plus fails with 

  ld.bfd   -pie  --gc-sections -Bstatic -Ttext 0x4a000000 -o u-boot -T u-
boot.lds arch/arm/cpu/armv7/start.o --start-group  arch/arm/cpu/built-in.o  
arch/arm/cpu/armv7/built-in.o  arch/arm/lib/built-in.o  board/sunxi/built-in.o  
cmd/built-in.o  common/built-in.o  disk/built-in.o  drivers/built-in.o  
drivers/dma/built-in.o  drivers/gpio/built-in.o  drivers/i2c/built-in.o  
drivers/mmc/built-in.o  drivers/mtd/built-in.o  drivers/mtd/onenand/built-in.o  
drivers/mtd/spi/built-in.o  drivers/net/built-in.o  drivers/net/phy/built-in.o  
drivers/pci/built-in.o  drivers/power/built-in.o  drivers/power/battery/built-
in.o  drivers/power/fuel_gauge/built-in.o  drivers/power/mfd/built-in.o  
drivers/power/pmic/built-in.o  drivers/power/regulator/built-in.o  drivers/
serial/built-in.o  drivers/spi/built-in.o  drivers/usb/dwc3/built-in.o  
drivers/usb/emul/built-in.o  drivers/usb/eth/built-in.o  drivers/usb/gadget/
built-in.o  drivers/usb/gadget/udc/built-in.o  drivers/usb/host/built-in.o  
drivers/usb/musb-new/built-in.o  drivers/usb/musb/built-in.o  drivers/usb/phy/
built-in.o  drivers/usb/ulpi/built-in.o  fs/built-in.o  lib/built-in.o  net/
built-in.o  test/built-in.o  test/dm/built-in.o --end-group arch/arm/lib/
eabi_compat.o  -L /usr/lib/gcc/armv7hl-redhat-linux-gnueabi/6.0.0 -lgcc -Map 
u-boot.map
board/sunxi/built-in.o: In function `i2c_init_board':
/builddir/build/BUILD/u-boot-2016.03/board/sunxi/board.c:363: undefined 
reference to `clock_twi_onoff'
ld.bfd: BFD version 2.26.20160125 assertion fail elf32-arm.c:8434
ld.bfd: error: required section '.rel.plt' not found in the linker script
ld.bfd: final link failed: Invalid operation


> On Wednesday, January 27, 2016 4:34:44 PM CDT Chen-Yu Tsai wrote:
> > Cubietruck Plus is a A83T/H8 based development board. The board has
> > standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
> > via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
> > WiFi, headphone out / mic in, and various GPIO headers.
> > 
> > The board also has an EEPROM on i2c0 which holds the MAC address.
> > 
> > DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20
> > is connected to the reset control of the PHY. EMAC is not actually
> > supported yet.
> > 
> > The DTS is the same as the one already in the kernel.
> > 
> > Signed-off-by: Chen-Yu Tsai <wens@csie.org>
> > ---
> > 
> >  arch/arm/dts/Makefile                       |  1 +
> >  arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65
> > 
> > +++++++++++++++++++++++++++++ configs/Cubietruck_plus_defconfig          
> > |
> > 18 ++++++++
> > 
> >  3 files changed, 84 insertions(+)
> >  create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> >  create mode 100644 configs/Cubietruck_plus_defconfig
> > 
> > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> > index 1c7d359..e338db5 100644
> > --- a/arch/arm/dts/Makefile
> > +++ b/arch/arm/dts/Makefile
> > @@ -184,6 +184,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
> > 
> >  	sun8i-a33-sinlinx-sina33.dtb
> >  
> >  dtb-$(CONFIG_MACH_SUN8I_A83T) += \
> >  
> >  	sun8i-a83t-allwinner-h8homlet-v2.dtb \
> > 
> > +	sun8i-a83t-cubietruck-plus.dtb \
> > 
> >  	sun8i-a83t-sinovoip-bpi-m3.dtb
> >  
> >  dtb-$(CONFIG_MACH_SUN8I_H3) += \
> >  
> >  	sun8i-h3-orangepi-pc.dtb \
> > 
> > diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> > b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644
> > index 0000000..88b1e09
> > --- /dev/null
> > +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
> > @@ -0,0 +1,65 @@
> > +/*
> > + * Copyright 2015 Chen-Yu Tsai
> > + *
> > + * Chen-Yu Tsai <wens@csie.org>
> > + *
> > + * This file is dual-licensed: you can use it either under the terms
> > + * of the GPL or the X11 license, at your option. Note that this dual
> > + * licensing only applies to this file, and not this project as a
> > + * whole.
> > + *
> > + *  a) This file is free software; you can redistribute it and/or
> > + *     modify it under the terms of the GNU General Public License as
> > + *     published by the Free Software Foundation; either version 2 of the
> > + *     License, or (at your option) any later version.
> > + *
> > + *     This file is distributed in the hope that it will be useful,
> > + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + *     GNU General Public License for more details.
> > + *
> > + * Or, alternatively,
> > + *
> > + *  b) Permission is hereby granted, free of charge, to any person
> > + *     obtaining a copy of this software and associated documentation
> > + *     files (the "Software"), to deal in the Software without
> > + *     restriction, including without limitation the rights to use,
> > + *     copy, modify, merge, publish, distribute, sublicense, and/or
> > + *     sell copies of the Software, and to permit persons to whom the
> > + *     Software is furnished to do so, subject to the following
> > + *     conditions:
> > + *
> > + *     The above copyright notice and this permission notice shall be
> > + *     included in all copies or substantial portions of the Software.
> > + *
> > + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
> > + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
> > + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
> > + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
> > + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
> > + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
> > + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > + *     OTHER DEALINGS IN THE SOFTWARE.
> > + */
> > +
> > +/dts-v1/;
> > +#include "sun8i-a83t.dtsi"
> > +
> > +/ {
> > +	model = "Cubietech Cubietruck Plus";
> > +	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
> > +
> > +	aliases {
> > +		serial0 = &uart0;
> > +	};
> > +
> > +	chosen {
> > +		stdout-path = "serial0:115200n8";
> > +	};
> > +};
> > +
> > +&uart0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&uart0_pins_b>;
> > +	status = "okay";
> > +};
> > diff --git a/configs/Cubietruck_plus_defconfig
> > b/configs/Cubietruck_plus_defconfig new file mode 100644
> > index 0000000..bb0b336
> > --- /dev/null
> > +++ b/configs/Cubietruck_plus_defconfig
> > @@ -0,0 +1,18 @@
> > +CONFIG_ARM=y
> > +CONFIG_ARCH_SUNXI=y
> > +CONFIG_MACH_SUN8I_A83T=y
> > +CONFIG_DRAM_CLK=672
> > +CONFIG_DRAM_ZQ=15355
> > +CONFIG_DRAM_ODT_EN=y
> > +CONFIG_MMC0_CD_PIN="PF6"
> > +CONFIG_I2C0_ENABLE=y
> > +CONFIG_AXP_GPIO=y
> > +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
> > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
> > +CONFIG_SPL=y
> > +CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)"
> > +# CONFIG_CMD_IMLS is not set
> > +# CONFIG_CMD_FLASH is not set
> > +# CONFIG_CMD_FPGA is not set
> > +CONFIG_AXP_DLDO3_VOLT=2500
> > +CONFIG_AXP_DLDO4_VOLT=3300
> 
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
Hans de Goede March 20, 2016, 1:47 p.m. UTC | #3 
hI,

On 19-03-16 23:43, Dennis Gilmore wrote:
> Hans,
>
> What is the status of this patch?

I added this to my sunxi-wip tree (including a fix for the build error)
a couple of days ago. I will send a pull-req for various u-boot sunxi
patch soonish and then it will hit mainline.

Regards,

Hans


>
> Dennis
>
> On Wednesday, January 27, 2016 4:34:44 PM CDT Chen-Yu Tsai wrote:
>> Cubietruck Plus is a A83T/H8 based development board. The board has
>> standard DDR3 SDRAM, AXP818 PMIC/codec, SD/MMC, eMMC, USB 2.0 host
>> via HSIC USB Hub, USB OTG, SATA via USB bridge, gigabit ethernet,
>> WiFi, headphone out / mic in, and various GPIO headers.
>>
>> The board also has an EEPROM on i2c0 which holds the MAC address.
>>
>> DLDO3 and DLDO4 provide power to the EMAC pins and PHY. Pin PA20
>> is connected to the reset control of the PHY. EMAC is not actually
>> supported yet.
>>
>> The DTS is the same as the one already in the kernel.
>>
>> Signed-off-by: Chen-Yu Tsai <wens@csie.org>
>> ---
>>   arch/arm/dts/Makefile                       |  1 +
>>   arch/arm/dts/sun8i-a83t-cubietruck-plus.dts | 65
>> +++++++++++++++++++++++++++++ configs/Cubietruck_plus_defconfig           |
>> 18 ++++++++
>>   3 files changed, 84 insertions(+)
>>   create mode 100644 arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
>>   create mode 100644 configs/Cubietruck_plus_defconfig
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 1c7d359..e338db5 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -184,6 +184,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
>>   	sun8i-a33-sinlinx-sina33.dtb
>>   dtb-$(CONFIG_MACH_SUN8I_A83T) += \
>>   	sun8i-a83t-allwinner-h8homlet-v2.dtb \
>> +	sun8i-a83t-cubietruck-plus.dtb \
>>   	sun8i-a83t-sinovoip-bpi-m3.dtb
>>   dtb-$(CONFIG_MACH_SUN8I_H3) += \
>>   	sun8i-h3-orangepi-pc.dtb \
>> diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
>> b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts new file mode 100644
>> index 0000000..88b1e09
>> --- /dev/null
>> +++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
>> @@ -0,0 +1,65 @@
>> +/*
>> + * Copyright 2015 Chen-Yu Tsai
>> + *
>> + * Chen-Yu Tsai <wens@csie.org>
>> + *
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + *  a) This file is free software; you can redistribute it and/or
>> + *     modify it under the terms of the GNU General Public License as
>> + *     published by the Free Software Foundation; either version 2 of the
>> + *     License, or (at your option) any later version.
>> + *
>> + *     This file is distributed in the hope that it will be useful,
>> + *     but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + *     GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + *  b) Permission is hereby granted, free of charge, to any person
>> + *     obtaining a copy of this software and associated documentation
>> + *     files (the "Software"), to deal in the Software without
>> + *     restriction, including without limitation the rights to use,
>> + *     copy, modify, merge, publish, distribute, sublicense, and/or
>> + *     sell copies of the Software, and to permit persons to whom the
>> + *     Software is furnished to do so, subject to the following
>> + *     conditions:
>> + *
>> + *     The above copyright notice and this permission notice shall be
>> + *     included in all copies or substantial portions of the Software.
>> + *
>> + *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + *     OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +/dts-v1/;
>> +#include "sun8i-a83t.dtsi"
>> +
>> +/ {
>> +	model = "Cubietech Cubietruck Plus";
>> +	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +};
>> +
>> +&uart0 {
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&uart0_pins_b>;
>> +	status = "okay";
>> +};
>> diff --git a/configs/Cubietruck_plus_defconfig
>> b/configs/Cubietruck_plus_defconfig new file mode 100644
>> index 0000000..bb0b336
>> --- /dev/null
>> +++ b/configs/Cubietruck_plus_defconfig
>> @@ -0,0 +1,18 @@
>> +CONFIG_ARM=y
>> +CONFIG_ARCH_SUNXI=y
>> +CONFIG_MACH_SUN8I_A83T=y
>> +CONFIG_DRAM_CLK=672
>> +CONFIG_DRAM_ZQ=15355
>> +CONFIG_DRAM_ODT_EN=y
>> +CONFIG_MMC0_CD_PIN="PF6"
>> +CONFIG_I2C0_ENABLE=y
>> +CONFIG_AXP_GPIO=y
>> +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
>> +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
>> +CONFIG_SPL=y
>> +CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)"
>> +# CONFIG_CMD_IMLS is not set
>> +# CONFIG_CMD_FLASH is not set
>> +# CONFIG_CMD_FPGA is not set
>> +CONFIG_AXP_DLDO3_VOLT=2500
>> +CONFIG_AXP_DLDO4_VOLT=3300
>
>
diff mbox

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1c7d359..e338db5 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -184,6 +184,7 @@  dtb-$(CONFIG_MACH_SUN8I_A33) += \
 	sun8i-a33-sinlinx-sina33.dtb
 dtb-$(CONFIG_MACH_SUN8I_A83T) += \
 	sun8i-a83t-allwinner-h8homlet-v2.dtb \
+	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-a83t-sinovoip-bpi-m3.dtb
 dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h3-orangepi-pc.dtb \
diff --git a/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
new file mode 100644
index 0000000..88b1e09
--- /dev/null
+++ b/arch/arm/dts/sun8i-a83t-cubietruck-plus.dts
@@ -0,0 +1,65 @@ 
+/*
+ * Copyright 2015 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "sun8i-a83t.dtsi"
+
+/ {
+	model = "Cubietech Cubietruck Plus";
+	compatible = "cubietech,cubietruck-plus", "allwinner,sun8i-a83t";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins_b>;
+	status = "okay";
+};
diff --git a/configs/Cubietruck_plus_defconfig b/configs/Cubietruck_plus_defconfig
new file mode 100644
index 0000000..bb0b336
--- /dev/null
+++ b/configs/Cubietruck_plus_defconfig
@@ -0,0 +1,18 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A83T=y
+CONFIG_DRAM_CLK=672
+CONFIG_DRAM_ZQ=15355
+CONFIG_DRAM_ODT_EN=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_I2C0_ENABLE=y
+CONFIG_AXP_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-cubietruck-plus"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RGMII,MACPWR=SUNXI_GPD(20)"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP_DLDO3_VOLT=2500
+CONFIG_AXP_DLDO4_VOLT=3300