@@ -23,6 +23,10 @@
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
+#ifdef CONFIG_FSL_CORENET
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#endif
#include <fsl_usb.h>
#include <hwconfig.h>
#include <linux/compiler.h>
@@ -788,6 +792,13 @@ int cpu_init_r(void)
spin_table_compat = 1;
#endif
+#ifdef CONFIG_FSL_CORENET
+ set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+ setup_portals();
+#endif
+#endif
+
l2cache_init();
#if defined(CONFIG_RAMBOOT_PBL)
disable_cpc_sram();
@@ -16,7 +16,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include <hwconfig.h>
@@ -1023,10 +1022,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
/*
* Adjust core voltage according to voltage ID
* This function changes I2C mux to channel 2.
@@ -14,7 +14,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
@@ -125,11 +124,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
-
return 0;
}
@@ -14,7 +14,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
@@ -140,8 +139,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
- set_liodns();
- setup_portals();
board_config_lanes_mux();
return 0;
@@ -15,7 +15,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include <hwconfig.h>
@@ -280,10 +279,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
#endif
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
board_mux_lane_to_slot();
board_retimer_ds125df111_init();
@@ -14,7 +14,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include "t102xrdb.h"
@@ -151,10 +150,6 @@ int board_early_init_r(void)
0, flash_esel, BOOKE_PAGESZ_256M, 1);
#endif
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
#ifdef CONFIG_T1024RDB
board_mux_lane();
#endif
@@ -15,7 +15,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include <hwconfig.h>
@@ -153,10 +152,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
#endif
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
return 0;
@@ -16,7 +16,6 @@
#include <asm/fsl_fdt.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include "../common/sleep.h"
@@ -84,11 +83,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
#endif
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
-
return 0;
}
@@ -14,7 +14,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
@@ -356,11 +355,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
-
/* Disable remote I2C connection to qixis fpga */
QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
@@ -14,7 +14,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include "t208xrdb.h"
@@ -81,11 +80,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
-
/*
* Adjust core voltage according to voltage ID
* This function changes I2C mux to channel 2.
@@ -15,7 +15,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -56,11 +55,6 @@ int board_early_init_r(void)
MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
-
return 0;
}
@@ -15,7 +15,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
@@ -552,11 +551,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
-
/* Disable remote I2C connection to qixis fpga */
QIXIS_WRITE(brdcfg[5], QIXIS_READ(brdcfg[5]) & ~BRDCFG5_IRE);
@@ -15,7 +15,6 @@
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
-#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
#include <fm_eth.h>
@@ -75,11 +74,6 @@ int board_early_init_r(void)
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, flash_esel, BOOKE_PAGESZ_256M, 1);
- set_liodns();
-#ifdef CONFIG_SYS_DPAA_QBMAN
- setup_portals();
-#endif
-
return 0;
}
Users migrating Freescale's PowerPC SoC U-Boot code to their custom board, often overlook the need to execute set_liodns() and setup_portals() being called by platform files. So Move set_liodns() and setup_portals() to common u-boot boot sequence Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> --- Changes for v2 - put function call CONFIG_FSL_CORENET arch/powerpc/cpu/mpc85xx/cpu_init.c | 11 +++++++++++ board/freescale/b4860qds/b4860qds.c | 5 ----- board/freescale/corenet_ds/corenet_ds.c | 6 ------ board/freescale/p2041rdb/p2041rdb.c | 3 --- board/freescale/t102xqds/t102xqds.c | 5 ----- board/freescale/t102xrdb/t102xrdb.c | 5 ----- board/freescale/t1040qds/t1040qds.c | 5 ----- board/freescale/t104xrdb/t104xrdb.c | 6 ------ board/freescale/t208xqds/t208xqds.c | 6 ------ board/freescale/t208xrdb/t208xrdb.c | 6 ------ board/freescale/t4qds/t4240emu.c | 6 ------ board/freescale/t4qds/t4240qds.c | 6 ------ board/freescale/t4rdb/t4240rdb.c | 6 ------ 13 files changed, 11 insertions(+), 65 deletions(-)