@@ -332,6 +332,7 @@
clock-frequency = <400000>;
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
i2c-scl-rising-time-ns = <100>; /* 45ns measured */
+ u-boot,dm-pre-reloc;
rk808: pmic@1b {
compatible = "rockchip,rk808";
@@ -344,6 +345,7 @@
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
+ u-boot,dm-pre-reloc;
vcc1-supply = <&vcc33_sys>;
vcc2-supply = <&vcc33_sys>;
@@ -74,4 +74,9 @@ void *rockchip_get_cru(void);
*/
int rkclk_get_clk(enum rk_clk_id clk_id, struct udevice **devp);
+struct rk3288_cru;
+struct rk3288_grf;
+
+void rkclk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf);
+
#endif
@@ -109,6 +109,18 @@ enum {
SPI0_DIV_MASK = 0x7f,
};
+/* CRU_CLKSEL37_CON */
+enum {
+ PCLK_CORE_DBG_DIV_SHIFT = 9,
+ PCLK_CORE_DBG_DIV_MASK = 0x1f,
+
+ ATCLK_CORE_DIV_CON_SHIFT = 4,
+ ATCLK_CORE_DIV_CON_MASK = 0x1f,
+
+ CLK_L2RAM_DIV_SHIFT = 0,
+ CLK_L2RAM_DIV_MASK = 7,
+};
+
/* CRU_CLKSEL39_CON */
enum {
ACLK_HEVC_PLL_SHIFT = 0xe,
@@ -16,6 +16,15 @@ config TARGET_CHROMEBOOK_JERRY
WiFi. It includes a Chrome OS EC (Cortex-M3) to provide access to
the keyboard and battery functions.
+config ROCKCHIP_FAST_SPL
+ bool "Change the CPU to full speed in SPL"
+ depends on TARGET_CHROMEBOOK_JERRY
+ help
+ Some boards want to boot as fast as possible. We can increase the
+ CPU frequency in SPL if the power supply is configured to the correct
+ voltage. This option is only available on boards which support it
+ and have the required PMIC code.
+
config SYS_SOC
default "rockchip"
@@ -22,6 +22,8 @@
#include <asm/arch/pmu_rk3288.h>
#include <asm/arch/sdram.h>
#include <linux/err.h>
+#include <power/regulator.h>
+#include <power/rk808_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -748,6 +750,32 @@ size_t sdram_size_mb(struct rk3288_pmu *pmu)
}
#ifdef CONFIG_SPL_BUILD
+# ifdef CONFIG_ROCKCHIP_FAST_SPL
+static int veyron_init(struct dram_info *priv)
+{
+ struct udevice *pmic;
+ int ret;
+
+ ret = uclass_first_device(UCLASS_PMIC, &pmic);
+ if (ret)
+ return ret;
+
+ /* Slowly raise to max CPU voltage to prevent overshoot */
+ ret = rk808_spl_configure_buck(pmic, 1, 1200000);
+ if (ret)
+ return ret;
+ udelay(175);/* Must wait for voltage to stabilize, 2mV/us */
+ ret = rk808_spl_configure_buck(pmic, 1, 1400000);
+ if (ret)
+ return ret;
+ udelay(100);/* Must wait for voltage to stabilize, 2mV/us */
+
+ rkclk_configure_cpu(priv->cru, priv->grf);
+
+ return 0;
+}
+# endif
+
static int setup_sdram(struct udevice *dev)
{
struct dram_info *priv = dev_get_priv(dev);
@@ -791,6 +819,14 @@ static int setup_sdram(struct udevice *dev)
return -EINVAL;
}
+# ifdef CONFIG_ROCKCHIP_FAST_SPL
+ if (!fdt_node_check_compatible(blob, 0, "google,veyron")) {
+ ret = veyron_init(priv);
+ if (ret)
+ return ret;
+ }
+# endif
+
return sdram_init(priv, ¶ms);
}
#endif
@@ -3,6 +3,7 @@ CONFIG_ARCH_ROCKCHIP=y
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ROCKCHIP_RK3288=y
CONFIG_TARGET_CHROMEBOOK_JERRY=y
+CONFIG_ROCKCHIP_FAST_SPL=y
CONFIG_SPL_STACK_R_ADDR=0x80000
CONFIG_DM_KEYBOARD=y
CONFIG_DEFAULT_DEVICE_TREE="rk3288-jerry"
@@ -59,6 +59,16 @@ enum {
/* PLL CON3 */
PLL_RESET_SHIFT = 5,
+ /* CLKSEL0 */
+ CORE_SEL_PLL_MASK = 1,
+ CORE_SEL_PLL_SHIFT = 15,
+ A17_DIV_MASK = 0x1f,
+ A17_DIV_SHIFT = 8,
+ MP_DIV_MASK = 0xf,
+ MP_DIV_SHIFT = 4,
+ M0_DIV_MASK = 0xf,
+ M0_DIV_SHIFT = 0,
+
/* CLKSEL1: pd bus clk pll sel: codec or general */
PD_BUS_SEL_PLL_MASK = 15,
PD_BUS_SEL_CPLL = 0,
@@ -438,6 +448,52 @@ static void rkclk_init(struct rk3288_cru *cru, struct rk3288_grf *grf)
}
#endif
+void rkclk_configure_cpu(struct rk3288_cru *cru, struct rk3288_grf *grf)
+{
+ /* pll enter slow-mode */
+ rk_clrsetreg(&cru->cru_mode_con,
+ APLL_MODE_MASK << APLL_MODE_SHIFT,
+ APLL_MODE_SLOW << APLL_MODE_SHIFT);
+
+ rkclk_set_pll(cru, CLK_ARM, &apll_init_cfg);
+
+ /* waiting for pll lock */
+ while (!(readl(&grf->soc_status[1]) & SOCSTS_APLL_LOCK))
+ udelay(1);
+
+ /*
+ * core clock pll source selection and
+ * set up dependent divisors for MPAXI/M0AXI and ARM clocks.
+ * core clock select apll, apll clk = 1800MHz
+ * arm clk = 1800MHz, mpclk = 450MHz, m0clk = 900MHz
+ */
+ rk_clrsetreg(&cru->cru_clksel_con[0],
+ CORE_SEL_PLL_MASK << CORE_SEL_PLL_SHIFT |
+ A17_DIV_MASK << A17_DIV_SHIFT |
+ MP_DIV_MASK << MP_DIV_SHIFT |
+ M0_DIV_MASK << M0_DIV_SHIFT,
+ 0 << A17_DIV_SHIFT |
+ 3 << MP_DIV_SHIFT |
+ 1 << M0_DIV_SHIFT);
+
+ /*
+ * set up dependent divisors for L2RAM/ATCLK and PCLK clocks.
+ * l2ramclk = 900MHz, atclk = 450MHz, pclk_dbg = 450MHz
+ */
+ rk_clrsetreg(&cru->cru_clksel_con[37],
+ CLK_L2RAM_DIV_MASK << CLK_L2RAM_DIV_SHIFT |
+ ATCLK_CORE_DIV_CON_MASK << ATCLK_CORE_DIV_CON_SHIFT |
+ PCLK_CORE_DBG_DIV_MASK >> PCLK_CORE_DBG_DIV_SHIFT,
+ 1 << CLK_L2RAM_DIV_SHIFT |
+ 3 << ATCLK_CORE_DIV_CON_SHIFT |
+ 3 << PCLK_CORE_DBG_DIV_SHIFT);
+
+ /* PLL enter normal-mode */
+ rk_clrsetreg(&cru->cru_mode_con,
+ APLL_MODE_MASK << APLL_MODE_SHIFT,
+ APLL_MODE_NORMAL << APLL_MODE_SHIFT);
+}
+
/* Get pll rate by id */
static uint32_t rkclk_pll_get_rate(struct rk3288_cru *cru,
enum rk_clk_id clk_id)
@@ -24,4 +24,7 @@
#define CONFIG_KEYBOARD
+#define CONFIG_SPL_POWER_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+
#endif
Add a feature which speeds up the CPU to full speed in SPL to minimise boot time. This is only supported for certain boards (at present only jerry). Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v2: None arch/arm/dts/rk3288-veyron.dtsi | 2 + arch/arm/include/asm/arch-rockchip/clock.h | 5 +++ arch/arm/include/asm/arch-rockchip/cru_rk3288.h | 12 ++++++ arch/arm/mach-rockchip/rk3288/Kconfig | 9 ++++ arch/arm/mach-rockchip/rk3288/sdram_rk3288.c | 36 ++++++++++++++++ configs/chromebook_jerry_defconfig | 1 + drivers/clk/clk_rk3288.c | 56 +++++++++++++++++++++++++ include/configs/chromebook_jerry.h | 3 ++ 8 files changed, 124 insertions(+)