diff mbox

[4.2.y-ckt,stable] Patch "iio: si7020: Swap data byte order" has been added to staging queue

Message ID 1452810425-18378-1-git-send-email-kamal@canonical.com
State New
Headers show

Commit Message

Kamal Mostafa Jan. 14, 2016, 10:27 p.m. UTC 
This is a note to let you know that I have just added a patch titled

    iio: si7020: Swap data byte order

to the linux-4.2.y-queue branch of the 4.2.y-ckt extended stable tree 
which can be found at:

    http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linux-4.2.y-queue

This patch is scheduled to be released in version 4.2.8-ckt2.

If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 4.2.y-ckt tree, see
https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable

Thanks.
-Kamal

---8<------------------------------------------------------------

From 1c2e1ba37e6b14d55edb2df34d7746fe37df0869 Mon Sep 17 00:00:00 2001
From: Chris Lesiak <chris.lesiak@licor.com>
Date: Mon, 2 Nov 2015 15:45:03 -0600
Subject: iio: si7020: Swap data byte order

commit 0d2f6fd3ffd5e7a447233a57112246bc00064752 upstream.

The Silicon Labs Si7013, Si7020, and Si7021 family of I2C humidity and
temperature sensors deliver 16 bit data high byte first.

See the datasheet available at:
https://www.silabs.com/Support%20Documents%2fTechnicalDocs%2fSi7020-A20.pdf

But as documented in Documentation/i2c/smbus-protocol,
i2c_smbus_read_word_data() expects the low byte first.

Change the driver to use i2c_smbus_read_word_swapped to get correct byte
order.

Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
---
 drivers/iio/humidity/si7020.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--
1.9.1
diff mbox

Patch

diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c
index fa3b809..1b6935d 100644
--- a/drivers/iio/humidity/si7020.c
+++ b/drivers/iio/humidity/si7020.c
@@ -50,10 +50,10 @@  static int si7020_read_raw(struct iio_dev *indio_dev,

 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		ret = i2c_smbus_read_word_data(*client,
-					       chan->type == IIO_TEMP ?
-					       SI7020CMD_TEMP_HOLD :
-					       SI7020CMD_RH_HOLD);
+		ret = i2c_smbus_read_word_swapped(*client,
+						  chan->type == IIO_TEMP ?
+						  SI7020CMD_TEMP_HOLD :
+						  SI7020CMD_RH_HOLD);
 		if (ret < 0)
 			return ret;
 		*val = ret >> 2;