diff mbox

[06/14] ARM: dts: imx6ul: disable PWMs by default

Message ID 1452619291-13625-7-git-send-email-LW@KARO-electronics.de
State New
Headers show

Commit Message

Lothar Waßmann Jan. 12, 2016, 5:21 p.m. UTC 
Since PWMs are only useful if they are actually connected to an output pin,
let users enable them explicitly in their device trees where they should
also set up the pin configuration.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
---
 arch/arm/boot/dts/imx6ul.dtsi | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 3aba0bb..863777e 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -512,6 +512,7 @@ 
 					 <&clks IMX6UL_CLK_PWM5>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm6: pwm@020f4000 {
@@ -522,6 +523,7 @@ 
 					 <&clks IMX6UL_CLK_PWM6>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm7: pwm@020f8000 {
@@ -532,6 +534,7 @@ 
 					 <&clks IMX6UL_CLK_PWM7>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 
 			pwm8: pwm@020fc000 {
@@ -542,6 +545,7 @@ 
 					 <&clks IMX6UL_CLK_PWM8>;
 				clock-names = "ipg", "per";
 				#pwm-cells = <2>;
+				status = "disabled";
 			};
 		};