| Message ID | 1452532860-24711-5-git-send-email-vishnupatekar0510@gmail.com |
|---|---|
| State | Accepted |
| Delegated to: | Hans de Goede |
| Headers | show |
Hi, On Tue, Jan 12, 2016 at 1:21 AM, Vishnu Patekar <vishnupatekar0510@gmail.com> wrote: > Add dts and defconfig for Banana-pi M3 board. > > It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, > mic, AP6212 Wifi, etc on it. > It is paired with AXP813 PMIC which is almost same as AXP818. > > Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> > --- > arch/arm/dts/Makefile | 3 +- > arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts | 64 ++++++++++++++++++++++++++++ I'd prefer sun8i-a83t-sinovoip-bpi-m3.dts to match sun6i-a31s-sinovoip-bpi-m2.dts > board/sunxi/MAINTAINERS | 5 +++ > configs/Bananapi_m3_defconfig | 26 +++++++++++ And Sinovoip_BPI_M3_defconfig like Sinovoip_BPI_M2_defconfig already in U-boot. > 4 files changed, 97 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts > create mode 100644 configs/Bananapi_m3_defconfig > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 0bcd316..2ab0926 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -178,7 +178,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ > sun8i-a33-q8-tablet.dtb \ > sun8i-a33-sinlinx-sina33.dtb > dtb-$(CONFIG_MACH_SUN8I_A83T) += \ > - sun8i-a83t-allwinner-h8homlet-v2.dtb > + sun8i-a83t-allwinner-h8homlet-v2.dtb \ > + sun8i-a83t-bananapi-m3-v1.2.dtb > dtb-$(CONFIG_MACH_SUN8I_H3) += \ > sun8i-h3-orangepi-pc.dtb \ > sun8i-h3-orangepi-plus.dtb > diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts > new file mode 100644 > index 0000000..91ff3a9 > --- /dev/null > +++ b/arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts > @@ -0,0 +1,64 @@ > +/* > + * Copyright 2015 Vishnu Patekar > + * Vishnu Patekar <vishnupatekar0510@gmail.com> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "sun8i-a83t.dtsi" > + > +/ { > + model = "Allwinner A83T BananaPi M3 Board v1.2"; > + compatible = "bananapi,m3v1.2", "allwinner,sun8i-a83t"; > + > + aliases { > + serial0 = &uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > +}; > + > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_b>; > + status = "okay"; > +}; > diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS > index 131c341..575847a 100644 > --- a/board/sunxi/MAINTAINERS > +++ b/board/sunxi/MAINTAINERS > @@ -84,6 +84,11 @@ M: Paul Kocialkowski <contact@paulk.fr> > S: Maintained > F: configs/Ampe_A76_defconfig > > +BANANA PI M3 A83T BOARD > +M: VishnuPatekar <vishnupatekar0510@gmail.com> > +S: Maintained > +F: configs/Bananapi_m3_defconfig > + > COLOMBUS BOARD > M: Maxime Ripard <maxime.ripard@free-electrons.com> > S: Maintained > diff --git a/configs/Bananapi_m3_defconfig b/configs/Bananapi_m3_defconfig > new file mode 100644 > index 0000000..36c5cde > --- /dev/null > +++ b/configs/Bananapi_m3_defconfig > @@ -0,0 +1,26 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_SUNXI=y > +CONFIG_MACH_SUN8I_A83T=y > +CONFIG_DRAM_CLK=480 > +CONFIG_DRAM_ZQ=15355 > +CONFIG_DRAM_ODT_EN=y > +CONFIG_DRAM_TYPE=7 > +CONFIG_SYS_EXTRA_OPTIONS="" > +#CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" > +#CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" > +CONFIG_AXP_GPIO=y > +#CONFIG_USB_MUSB_HOST=y > +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3-v1.2" > +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set > +CONFIG_SPL=y > +# CONFIG_CMD_IMLS is not set > +# CONFIG_CMD_FLASH is not set > +# CONFIG_CMD_FPGA is not set > +CONFIG_AXP_DCDC1_VOLT=3000 > +CONFIG_AXP_DCDC2_VOLT=900 > +CONFIG_AXP_DCDC3_VOLT=900 > +CONFIG_AXP_DCDC4_VOLT=0 > +CONFIG_AXP_DCDC5_VOLT=1200 > +CONFIG_AXP_ALDO2_VOLT=0 > +CONFIG_AXP_ALDO3_VOLT=0 > +CONFIG_AXP_DLDO4_VOLT=0 Are these (ALDO/DLDO) voltages correct? ChenYu
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0bcd316..2ab0926 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -178,7 +178,8 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \ sun8i-a33-q8-tablet.dtb \ sun8i-a33-sinlinx-sina33.dtb dtb-$(CONFIG_MACH_SUN8I_A83T) += \ - sun8i-a83t-allwinner-h8homlet-v2.dtb + sun8i-a83t-allwinner-h8homlet-v2.dtb \ + sun8i-a83t-bananapi-m3-v1.2.dtb dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-pc.dtb \ sun8i-h3-orangepi-plus.dtb diff --git a/arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts b/arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts new file mode 100644 index 0000000..91ff3a9 --- /dev/null +++ b/arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts @@ -0,0 +1,64 @@ +/* + * Copyright 2015 Vishnu Patekar + * Vishnu Patekar <vishnupatekar0510@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-a83t.dtsi" + +/ { + model = "Allwinner A83T BananaPi M3 Board v1.2"; + compatible = "bananapi,m3v1.2", "allwinner,sun8i-a83t"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_b>; + status = "okay"; +}; diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index 131c341..575847a 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -84,6 +84,11 @@ M: Paul Kocialkowski <contact@paulk.fr> S: Maintained F: configs/Ampe_A76_defconfig +BANANA PI M3 A83T BOARD +M: VishnuPatekar <vishnupatekar0510@gmail.com> +S: Maintained +F: configs/Bananapi_m3_defconfig + COLOMBUS BOARD M: Maxime Ripard <maxime.ripard@free-electrons.com> S: Maintained diff --git a/configs/Bananapi_m3_defconfig b/configs/Bananapi_m3_defconfig new file mode 100644 index 0000000..36c5cde --- /dev/null +++ b/configs/Bananapi_m3_defconfig @@ -0,0 +1,26 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_A83T=y +CONFIG_DRAM_CLK=480 +CONFIG_DRAM_ZQ=15355 +CONFIG_DRAM_ODT_EN=y +CONFIG_DRAM_TYPE=7 +CONFIG_SYS_EXTRA_OPTIONS="" +#CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" +#CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" +CONFIG_AXP_GPIO=y +#CONFIG_USB_MUSB_HOST=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-bananapi-m3-v1.2" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_AXP_DCDC1_VOLT=3000 +CONFIG_AXP_DCDC2_VOLT=900 +CONFIG_AXP_DCDC3_VOLT=900 +CONFIG_AXP_DCDC4_VOLT=0 +CONFIG_AXP_DCDC5_VOLT=1200 +CONFIG_AXP_ALDO2_VOLT=0 +CONFIG_AXP_ALDO3_VOLT=0 +CONFIG_AXP_DLDO4_VOLT=0
Add dts and defconfig for Banana-pi M3 board. It has 2G LPDDR3, UART, ethernet, USB, HDMI, USB Sata, MIPI DSI, mic, AP6212 Wifi, etc on it. It is paired with AXP813 PMIC which is almost same as AXP818. Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com> --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts | 64 ++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 5 +++ configs/Bananapi_m3_defconfig | 26 +++++++++++ 4 files changed, 97 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun8i-a83t-bananapi-m3-v1.2.dts create mode 100644 configs/Bananapi_m3_defconfig