Message ID | 20160111083231.8836.248.stgit@localhost.localdomain |
---|---|
State | Superseded |
Headers | show |
(background for others: petitboot is the bootloader on OpenPower machines - it's a linux+initramfs in flash from buildroot on top of OPAL firmware. You can exit from the petitboot UI into a shell, where a variety of utilities are available to help rescue a system) Mamatha <mamatha4@linux.vnet.ibm.com> writes: > Enable NVME block device and nvme tool support in petitboot > After enabling NVME device and tool in op-build this will increase the size > of rootfs.tar by 92KB and zImage.epapr by 41KB. I think this should read more like: "Add support for building NVME utility - a utility for interacting with standard NVM Express (optimized PCI Express SSD interface) devices." > > Signed-off-by: Mamatha <mamatha4@linux.vnet.ibm.com> > --- > package/Config.in | 1 + > package/nvme/Config.in | 6 ++++++ > package/nvme/nvme.mk | 23 +++++++++++++++++++++++ > 3 files changed, 30 insertions(+) > create mode 100755 package/nvme/Config.in > create mode 100755 package/nvme/nvme.mk > > diff --git a/package/Config.in b/package/Config.in > index e0c2e2a..014debd 100644 > --- a/package/Config.in > +++ b/package/Config.in > @@ -1399,6 +1399,7 @@ endif > source "package/openvmtools/Config.in" > source "package/polkit/Config.in" > source "package/powerpc-utils/Config.in" > + source "package/nvme/Config.in" > if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS > source "package/procps-ng/Config.in" > source "package/psmisc/Config.in" > diff --git a/package/nvme/Config.in b/package/nvme/Config.in > new file mode 100755 > index 0000000..8b5d37d > --- /dev/null > +++ b/package/nvme/Config.in > @@ -0,0 +1,6 @@ > +config BR2_PACKAGE_NVME > + bool "nvme" > + help > + System utilities for IBM Power NVME devices > + > + https://github.com/linux-nvme/nvme-cli Is it POWER specific? It doesn't look like it... > diff --git a/package/nvme/nvme.mk b/package/nvme/nvme.mk > new file mode 100755 > index 0000000..214e879 > --- /dev/null > +++ b/package/nvme/nvme.mk > @@ -0,0 +1,23 @@ > +################################################################################ > +# > +# nvme > +# > +################################################################################ > + > +NVME_VERSION = 798812627467a9999682176ade631ee5b6ea4785 Is this the 0.2 tag? If not, why not? It would seem sensible to include the most recent released version, or get them to release one with the support we need. Also, > +NVME_SITE = https://github.com/linux-nvme/nvme-cli.git I wonder why this utility isn't mentioned on http://nvmexpress.org/resources/linux-driver-information/ ?
Thanks for reviewing the patch. On 01/12/2016 06:39 AM, Stewart Smith wrote: > (background for others: petitboot is the bootloader on OpenPower > machines - it's a linux+initramfs in flash from buildroot on top of OPAL > firmware. You can exit from the petitboot UI into a shell, where a > variety of utilities are available to help rescue a system) > > Mamatha <mamatha4@linux.vnet.ibm.com> writes: >> Enable NVME block device and nvme tool support in petitboot >> After enabling NVME device and tool in op-build this will increase the size >> of rootfs.tar by 92KB and zImage.epapr by 41KB. > I think this should read more like: > > "Add support for building NVME utility - a utility for interacting with > standard NVM Express (optimized PCI Express SSD interface) devices. > >> Signed-off-by: Mamatha <mamatha4@linux.vnet.ibm.com> >> --- >> package/Config.in | 1 + >> package/nvme/Config.in | 6 ++++++ >> package/nvme/nvme.mk | 23 +++++++++++++++++++++++ >> 3 files changed, 30 insertions(+) >> create mode 100755 package/nvme/Config.in >> create mode 100755 package/nvme/nvme.mk >> >> diff --git a/package/Config.in b/package/Config.in >> index e0c2e2a..014debd 100644 >> --- a/package/Config.in >> +++ b/package/Config.in >> @@ -1399,6 +1399,7 @@ endif >> source "package/openvmtools/Config.in" >> source "package/polkit/Config.in" >> source "package/powerpc-utils/Config.in" >> + source "package/nvme/Config.in" >> if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS >> source "package/procps-ng/Config.in" >> source "package/psmisc/Config.in" >> diff --git a/package/nvme/Config.in b/package/nvme/Config.in >> new file mode 100755 >> index 0000000..8b5d37d >> --- /dev/null >> +++ b/package/nvme/Config.in >> @@ -0,0 +1,6 @@ >> +config BR2_PACKAGE_NVME >> + bool "nvme" >> + help >> + System utilities for IBM Power NVME devices >> + >> + https://github.com/linux-nvme/nvme-cli > Is it POWER specific? It doesn't look like it... ok, I will update this > >> diff --git a/package/nvme/nvme.mk b/package/nvme/nvme.mk >> new file mode 100755 >> index 0000000..214e879 >> --- /dev/null >> +++ b/package/nvme/nvme.mk >> @@ -0,0 +1,23 @@ >> +################################################################################ >> +# >> +# nvme >> +# >> +################################################################################ >> + >> +NVME_VERSION = 798812627467a9999682176ade631ee5b6ea4785 > Is this the 0.2 tag? If not, why not? It would seem sensible to include > the most recent released version, or get them to release one with the > support we need I have updated the NVME version in V2 patch, which I have sent yesterday. > > Also, > >> +NVME_SITE = https://github.com/linux-nvme/nvme-cli.git > I wonder why this utility isn't mentioned on > http://nvmexpress.org/resources/linux-driver-information/ ? >
diff --git a/package/Config.in b/package/Config.in index e0c2e2a..014debd 100644 --- a/package/Config.in +++ b/package/Config.in @@ -1399,6 +1399,7 @@ endif source "package/openvmtools/Config.in" source "package/polkit/Config.in" source "package/powerpc-utils/Config.in" + source "package/nvme/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/procps-ng/Config.in" source "package/psmisc/Config.in" diff --git a/package/nvme/Config.in b/package/nvme/Config.in new file mode 100755 index 0000000..8b5d37d --- /dev/null +++ b/package/nvme/Config.in @@ -0,0 +1,6 @@ +config BR2_PACKAGE_NVME + bool "nvme" + help + System utilities for IBM Power NVME devices + + https://github.com/linux-nvme/nvme-cli diff --git a/package/nvme/nvme.mk b/package/nvme/nvme.mk new file mode 100755 index 0000000..214e879 --- /dev/null +++ b/package/nvme/nvme.mk @@ -0,0 +1,23 @@ +################################################################################ +# +# nvme +# +################################################################################ + +NVME_VERSION = 798812627467a9999682176ade631ee5b6ea4785 +NVME_SITE = https://github.com/linux-nvme/nvme-cli.git +NVME_SITE_METHOD = git +NVME_LICENSE = GPLv2 +NVME_LICENSE_FILES = COPYING + +define NVME_BUILD_CMDS + $(MAKE) $(TARGET_CONFIGURE_OPTS) -C $(@D) \ + INCLUDEDIR="-I." all +endef + +define NVME_INSTALL_TARGET_CMDS + $(INSTALL) -D -m 0755 $(@D)/nvme $(TARGET_DIR)/sbin/nvme +endef + +$(eval $(generic-package)) +
Enable NVME block device and nvme tool support in petitboot After enabling NVME device and tool in op-build this will increase the size of rootfs.tar by 92KB and zImage.epapr by 41KB. Signed-off-by: Mamatha <mamatha4@linux.vnet.ibm.com> --- package/Config.in | 1 + package/nvme/Config.in | 6 ++++++ package/nvme/nvme.mk | 23 +++++++++++++++++++++++ 3 files changed, 30 insertions(+) create mode 100755 package/nvme/Config.in create mode 100755 package/nvme/nvme.mk