diff mbox

[v4,1/2] Documentation: devicetree: add epson rx6110 binding

Message ID 1451927075-8656-1-git-send-email-s.trumtrar@pengutronix.de
State Accepted
Headers show

Commit Message

Steffen Trumtrar Jan. 4, 2016, 5:04 p.m. UTC 
Add the binding documentation for the Epson RX6110 RTC.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---

 .../devicetree/bindings/rtc/epson,rx6110.txt       | 39 ++++++++++++++++++++++
 1 file changed, 39 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt

Comments

Alexandre Belloni Jan. 31, 2016, 11:53 a.m. UTC | #1 
On 04/01/2016 at 18:04:34 +0100, Steffen Trumtrar wrote :
> Add the binding documentation for the Epson RX6110 RTC.
> 
> Acked-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> ---
> 
>  .../devicetree/bindings/rtc/epson,rx6110.txt       | 39 ++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/rtc/epson,rx6110.txt
> 
Applied, thanks.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/rtc/epson,rx6110.txt b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
new file mode 100644
index 000000000000..3dc313e01f77
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/epson,rx6110.txt
@@ -0,0 +1,39 @@ 
+Epson RX6110 Real Time Clock
+============================
+
+The Epson RX6110 can be used with SPI or I2C busses. The kind of
+bus depends on the SPISEL pin and can not be configured via software.
+
+I2C mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg : the I2C address of the device for I2C
+
+Example:
+
+	rtc: rtc@32 {
+		compatible = "epson,rx6110"
+		reg = <0x32>;
+	};
+
+SPI mode
+--------
+
+Required properties:
+  - compatible: should be: "epson,rx6110"
+  - reg: chip select number
+  - spi-cs-high: RX6110 needs chipselect high
+  - spi-cpha: RX6110 works with SPI shifted clock phase
+  - spi-cpol: RX6110 works with SPI inverse clock polarity
+
+Example:
+
+	rtc: rtc@3 {
+		compatible = "epson,rx6110"
+		reg = <3>
+		spi-cs-high;
+		spi-cpha;
+		spi-cpol;
+	};