@@ -664,6 +664,7 @@ struct ixgbe_adapter {
#ifdef CONFIG_IXGBE_VXLAN
#define IXGBE_FLAG2_VXLAN_REREG_NEEDED BIT(12)
#endif
+#define IXGBE_FLAG2_VLAN_PROMISC BIT(13)
/* Tx fast path data */
int num_tx_queues;
@@ -3702,6 +3702,9 @@ static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter)
/* Map PF MAC address in RAR Entry 0 to first pool following VFs */
hw->mac.ops.set_vmdq(hw, 0, VMDQ_P(0));
+ /* clear VLAN promisc flag so VFTA will be updated if necessary */
+ adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC;
+
/*
* Set up VF register offsets for selected VT Mode,
* i.e. 32 or 64 VFs for SR-IOV
@@ -3990,6 +3993,129 @@ static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter)
}
}
+static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vlnctrl, i;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ default:
+ if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED)
+ break;
+ /* fall through */
+ case ixgbe_mac_82598EB:
+ /* legacy case, we can just disable VLAN filtering */
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+ return;
+ }
+
+ /* We are already in VLAN promisc, nothing to do */
+ if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)
+ return;
+
+ /* Set flag so we don't redo unnecessary work */
+ adapter->flags2 |= IXGBE_FLAG2_VLAN_PROMISC;
+
+ /* Add PF to all active pools */
+ for (i = IXGBE_VLVF_ENTRIES; --i;) {
+ u32 reg_offset = IXGBE_VLVFB(i * 2 + VMDQ_P(0) / 32);
+ u32 vlvfb = IXGBE_READ_REG(hw, reg_offset);
+
+ vlvfb |= 1 << (VMDQ_P(0) % 32);
+ IXGBE_WRITE_REG(hw, reg_offset, vlvfb);
+ }
+
+ /* Set all bits in the VLAN filter table array */
+ for (i = hw->mac.vft_size; i--;)
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), ~0U);
+}
+
+#define VFTA_BLOCK_SIZE 8
+static void ixgbe_scrub_vfta(struct ixgbe_adapter *adapter, u32 vfta_offset)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vfta[VFTA_BLOCK_SIZE] = { 0 };
+ u32 vid_start = vfta_offset * 32;
+ u32 vid_end = vid_start + (VFTA_BLOCK_SIZE * 32);
+ u32 i, vid, word, bits;
+
+ for (i = IXGBE_VLVF_ENTRIES; --i;) {
+ u32 vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i));
+
+ /* pull VLAN ID from VLVF */
+ vid = vlvf & VLAN_VID_MASK;
+
+ /* only concern outselves with a certain range */
+ if (vid < vid_start || vid >= vid_end)
+ continue;
+
+ if (vlvf) {
+ /* record VLAN ID in VFTA */
+ vfta[(vid - vid_start) / 32] |= 1 << (vid % 32);
+
+ /* if PF is part of this then continue */
+ if (test_bit(vid, adapter->active_vlans))
+ continue;
+ }
+
+ /* remove PF from the pool */
+ word = i * 2 + VMDQ_P(0) / 32;
+ bits = ~(1 << (VMDQ_P(0) % 32));
+ bits &= IXGBE_READ_REG(hw, IXGBE_VLVFB(word));
+ IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), bits);
+ }
+
+ /* extract values from active_vlans and write back to VFTA */
+ for (i = VFTA_BLOCK_SIZE; i--;) {
+ vid = (vfta_offset + i) * 32;
+ word = vid / BITS_PER_LONG;
+ bits = vid % BITS_PER_LONG;
+
+ vfta[i] |= adapter->active_vlans[word] >> bits;
+
+ IXGBE_WRITE_REG(hw, IXGBE_VFTA(vfta_offset + i), vfta[i]);
+ }
+}
+
+static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter)
+{
+ struct ixgbe_hw *hw = &adapter->hw;
+ u32 vlnctrl, i;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_82599EB:
+ case ixgbe_mac_X540:
+ case ixgbe_mac_X550:
+ case ixgbe_mac_X550EM_x:
+ default:
+ if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED)
+ break;
+ /* fall through */
+ case ixgbe_mac_82598EB:
+ vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
+ vlnctrl &= ~IXGBE_VLNCTRL_CFIEN;
+ vlnctrl |= IXGBE_VLNCTRL_VFE;
+ IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
+ return;
+ }
+
+ /* We are not in VLAN promisc, nothing to do */
+ if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC))
+ return;
+
+ /* Set flag so we don't redo unnecessary work */
+ adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC;
+
+ for (i = 0; i < hw->mac.vft_size; i += VFTA_BLOCK_SIZE)
+ ixgbe_scrub_vfta(adapter, i);
+}
+
static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter)
{
u16 vid;
@@ -4246,12 +4372,10 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
struct ixgbe_adapter *adapter = netdev_priv(netdev);
struct ixgbe_hw *hw = &adapter->hw;
u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE;
- u32 vlnctrl;
int count;
/* Check for Promiscuous and All Multicast modes */
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
- vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
/* set all bits that we expect to always be set */
fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */
@@ -4261,25 +4385,18 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
/* clear the bits we are changing the status of */
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
- vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
if (netdev->flags & IFF_PROMISC) {
hw->addr_ctrl.user_set_promisc = true;
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
vmolr |= IXGBE_VMOLR_MPE;
- /* Only disable hardware filter vlans in promiscuous mode
- * if SR-IOV and VMDQ are disabled - otherwise ensure
- * that hardware VLAN filters remain enabled.
- */
- if (adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED |
- IXGBE_FLAG_SRIOV_ENABLED))
- vlnctrl |= (IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
+ ixgbe_vlan_promisc_enable(adapter);
} else {
if (netdev->flags & IFF_ALLMULTI) {
fctrl |= IXGBE_FCTRL_MPE;
vmolr |= IXGBE_VMOLR_MPE;
}
- vlnctrl |= IXGBE_VLNCTRL_VFE;
hw->addr_ctrl.user_set_promisc = false;
+ ixgbe_vlan_promisc_disable(adapter);
}
/*
@@ -4323,7 +4440,6 @@ void ixgbe_set_rx_mode(struct net_device *netdev)
/* NOTE: VLAN filtering is disabled by setting PROMISC */
}
- IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl);
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX)