Message ID | 1449714053-26416-6-git-send-email-wenyou.yang@atmel.com |
---|---|
State | Superseded |
Delegated to: | Andreas Bießmann |
Headers | show |
Hello Wenyou, Am 10.12.2015 um 03:20 schrieb Wenyou Yang: > Due to introducing the new peripheral clock handle functions, > use these functions to reduce the duplicated code. > > Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> > --- > > Changes in v3: None > Changes in v2: None > > drivers/net/at91_emac.c | 9 ++++----- > drivers/usb/host/ehci-atmel.c | 8 -------- > drivers/usb/host/ohci-at91.c | 20 ++++---------------- > 3 files changed, 8 insertions(+), 29 deletions(-) Tested on the smartweb board, see log: http://xeidos.ddns.net/buildbot/builders/smartweb_dfu/builds/29/steps/shell/logs/tbotlog Tested-by: Heiko Schocher <hs@denx.de> bye, Heiko > > diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c > index d51e098..bb6866d 100644 > --- a/drivers/net/at91_emac.c > +++ b/drivers/net/at91_emac.c > @@ -12,7 +12,6 @@ > #include <asm/io.h> > #include <asm/arch/hardware.h> > #include <asm/arch/at91_emac.h> > -#include <asm/arch/at91_pmc.h> > #include <asm/arch/at91_pio.h> > #include <net.h> > #include <netdev.h> > @@ -321,7 +320,6 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) > emac_device *dev; > at91_emac_t *emac; > at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; > - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; > > emac = (at91_emac_t *) netdev->iobase; > dev = (emac_device *) netdev->priv; > @@ -347,7 +345,8 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) > writel(value, &pio->piob.pdr); > writel(value, &pio->piob.bsr); > > - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); > + at91_periph_clk_enable(ATMEL_ID_EMAC); > + > writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl); > > /* Init Ethernet buffers */ > @@ -452,10 +451,10 @@ static int at91emac_recv(struct eth_device *netdev) > static int at91emac_write_hwaddr(struct eth_device *netdev) > { > at91_emac_t *emac; > - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; > emac = (at91_emac_t *) netdev->iobase; > > - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); > + at91_periph_clk_enable(ATMEL_ID_EMAC); > + > debug_cond(DEBUG_AT91EMAC, > "init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n", > netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3], > diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c > index 9a8f004..a33fb49 100644 > --- a/drivers/usb/host/ehci-atmel.c > +++ b/drivers/usb/host/ehci-atmel.c > @@ -40,11 +40,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, > } > > /* Enable USB Host clock */ > -#ifdef CPU_HAS_PCR > at91_periph_clk_enable(ATMEL_ID_UHPHS); > -#else > - writel(1 << ATMEL_ID_UHPHS, &pmc->pcer); > -#endif > > *hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI; > *hcor = (struct ehci_hcor *)((uint32_t)*hccr + > @@ -59,11 +55,7 @@ int ehci_hcd_stop(int index) > ulong start_time, tmp_time; > > /* Disable USB Host Clock */ > -#ifdef CPU_HAS_PCR > at91_periph_clk_disable(ATMEL_ID_UHPHS); > -#else > - writel(1 << ATMEL_ID_UHPHS, &pmc->pcdr); > -#endif > > start_time = get_timer(0); > /* Disable UTMI PLL */ > diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c > index 820e2e5..da85111 100644 > --- a/drivers/usb/host/ohci-at91.c > +++ b/drivers/usb/host/ohci-at91.c > @@ -37,17 +37,11 @@ int usb_cpu_init(void) > writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb); > #endif > > - /* Enable USB host clock. */ > -#ifdef CPU_HAS_PCR > at91_periph_clk_enable(ATMEL_ID_UHP); > -#else > - writel(1 << ATMEL_ID_UHP, &pmc->pcer); > -#endif > > + at91_system_clk_enable(ATMEL_PMC_UHP); > #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) > - writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer); > -#else > - writel(ATMEL_PMC_UHP, &pmc->scer); > + at91_system_clk_enable(AT91_PMC_HCK0); > #endif > > return 0; > @@ -57,17 +51,11 @@ int usb_cpu_stop(void) > { > at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; > > - /* Disable USB host clock. */ > -#ifdef CPU_HAS_PCR > at91_periph_clk_disable(ATMEL_ID_UHP); > -#else > - writel(1 << ATMEL_ID_UHP, &pmc->pcdr); > -#endif > > + at91_system_clk_disable(ATMEL_PMC_UHP); > #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) > - writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr); > -#else > - writel(ATMEL_PMC_UHP, &pmc->scdr); > + at91_system_clk_disable(AT91_PMC_HCK0); > #endif > > #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB >
diff --git a/drivers/net/at91_emac.c b/drivers/net/at91_emac.c index d51e098..bb6866d 100644 --- a/drivers/net/at91_emac.c +++ b/drivers/net/at91_emac.c @@ -12,7 +12,6 @@ #include <asm/io.h> #include <asm/arch/hardware.h> #include <asm/arch/at91_emac.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/at91_pio.h> #include <net.h> #include <netdev.h> @@ -321,7 +320,6 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) emac_device *dev; at91_emac_t *emac; at91_pio_t *pio = (at91_pio_t *) ATMEL_BASE_PIO; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; emac = (at91_emac_t *) netdev->iobase; dev = (emac_device *) netdev->priv; @@ -347,7 +345,8 @@ static int at91emac_init(struct eth_device *netdev, bd_t *bd) writel(value, &pio->piob.pdr); writel(value, &pio->piob.bsr); - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); + writel(readl(&emac->ctl) | AT91_EMAC_CTL_CSR, &emac->ctl); /* Init Ethernet buffers */ @@ -452,10 +451,10 @@ static int at91emac_recv(struct eth_device *netdev) static int at91emac_write_hwaddr(struct eth_device *netdev) { at91_emac_t *emac; - at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC; emac = (at91_emac_t *) netdev->iobase; - writel(1 << ATMEL_ID_EMAC, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC); + debug_cond(DEBUG_AT91EMAC, "init MAC-ADDR %02x:%02x:%02x:%02x:%02x:%02x\n", netdev->enetaddr[5], netdev->enetaddr[4], netdev->enetaddr[3], diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index 9a8f004..a33fb49 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -40,11 +40,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, } /* Enable USB Host clock */ -#ifdef CPU_HAS_PCR at91_periph_clk_enable(ATMEL_ID_UHPHS); -#else - writel(1 << ATMEL_ID_UHPHS, &pmc->pcer); -#endif *hccr = (struct ehci_hccr *)ATMEL_BASE_EHCI; *hcor = (struct ehci_hcor *)((uint32_t)*hccr + @@ -59,11 +55,7 @@ int ehci_hcd_stop(int index) ulong start_time, tmp_time; /* Disable USB Host Clock */ -#ifdef CPU_HAS_PCR at91_periph_clk_disable(ATMEL_ID_UHPHS); -#else - writel(1 << ATMEL_ID_UHPHS, &pmc->pcdr); -#endif start_time = get_timer(0); /* Disable UTMI PLL */ diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 820e2e5..da85111 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -37,17 +37,11 @@ int usb_cpu_init(void) writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb); #endif - /* Enable USB host clock. */ -#ifdef CPU_HAS_PCR at91_periph_clk_enable(ATMEL_ID_UHP); -#else - writel(1 << ATMEL_ID_UHP, &pmc->pcer); -#endif + at91_system_clk_enable(ATMEL_PMC_UHP); #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) - writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scer); -#else - writel(ATMEL_PMC_UHP, &pmc->scer); + at91_system_clk_enable(AT91_PMC_HCK0); #endif return 0; @@ -57,17 +51,11 @@ int usb_cpu_stop(void) { at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - /* Disable USB host clock. */ -#ifdef CPU_HAS_PCR at91_periph_clk_disable(ATMEL_ID_UHP); -#else - writel(1 << ATMEL_ID_UHP, &pmc->pcdr); -#endif + at91_system_clk_disable(ATMEL_PMC_UHP); #if defined(CONFIG_AT91SAM9261) || defined(CONFIG_AT91SAM9G10) - writel(ATMEL_PMC_UHP | AT91_PMC_HCK0, &pmc->scdr); -#else - writel(ATMEL_PMC_UHP, &pmc->scdr); + at91_system_clk_disable(AT91_PMC_HCK0); #endif #ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB
Due to introducing the new peripheral clock handle functions, use these functions to reduce the duplicated code. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> --- Changes in v3: None Changes in v2: None drivers/net/at91_emac.c | 9 ++++----- drivers/usb/host/ehci-atmel.c | 8 -------- drivers/usb/host/ohci-at91.c | 20 ++++---------------- 3 files changed, 8 insertions(+), 29 deletions(-)