@@ -5056,8 +5056,8 @@ This firmware often needs to be loaded during U-Boot booting.
- CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE
Define minimum DDR size required for debug server image
-- CONFIG_SYS_MEM_TOP_HIDE_MIN
- Define minimum DDR size to be hided from top of the DDR memory
+- CONFIG_SYS_MC_RSV_MEM_ALIGN
+ Define alignment of reserved memory MC requires
Reproducible builds
-------------------
@@ -636,3 +636,24 @@ void reset_cpu(ulong addr)
val |= 0x02;
scfg_out32(rstcr, val);
}
+
+phys_size_t board_reserve_ram_top(phys_size_t ram_size)
+{
+ phys_size_t ram_top = ram_size;
+
+#ifdef CONFIG_SYS_MEM_TOP_HIDE
+#error CONFIG_SYS_MEM_TOP_HIDE not to be used together with this function
+#endif
+/* Carve the Debug Server private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_DEBUG_SERVER
+ ram_top -= debug_server_get_dram_block_size();
+#endif
+
+/* Carve the MC private DRAM block from the end of DRAM */
+#ifdef CONFIG_FSL_MC_ENET
+ ram_top -= mc_get_dram_block_size();
+ ram_top &= ~(CONFIG_SYS_MC_RSV_MEM_ALIGN - 1);
+#endif
+
+ return ram_top;
+}
@@ -68,23 +68,6 @@ int arch_misc_init(void)
}
#endif
-unsigned long get_dram_size_to_hide(void)
-{
- unsigned long dram_to_hide = 0;
-
-/* Carve the Debug Server private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_DEBUG_SERVER
- dram_to_hide += debug_server_get_dram_block_size();
-#endif
-
-/* Carve the MC private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_MC_ENET
- dram_to_hide += mc_get_dram_block_size();
-#endif
-
- return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN);
-}
-
int board_eth_init(bd_t *bis)
{
int error = 0;
@@ -253,23 +253,6 @@ int arch_misc_init(void)
}
#endif
-unsigned long get_dram_size_to_hide(void)
-{
- unsigned long dram_to_hide = 0;
-
-/* Carve the Debug Server private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_DEBUG_SERVER
- dram_to_hide += debug_server_get_dram_block_size();
-#endif
-
-/* Carve the MC private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_MC_ENET
- dram_to_hide += mc_get_dram_block_size();
-#endif
-
- return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN);
-}
-
#ifdef CONFIG_FSL_MC_ENET
void fdt_fixup_board_enet(void *fdt)
{
@@ -219,23 +219,6 @@ int arch_misc_init(void)
}
#endif
-unsigned long get_dram_size_to_hide(void)
-{
- unsigned long dram_to_hide = 0;
-
-/* Carve the Debug Server private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_DEBUG_SERVER
- dram_to_hide += debug_server_get_dram_block_size();
-#endif
-
-/* Carve the MC private DRAM block from the end of DRAM */
-#ifdef CONFIG_FSL_MC_ENET
- dram_to_hide += mc_get_dram_block_size();
-#endif
-
- return roundup(dram_to_hide, CONFIG_SYS_MEM_TOP_HIDE_MIN);
-}
-
#ifdef CONFIG_FSL_MC_ENET
void fdt_fixup_board_enet(void *fdt)
{
@@ -195,10 +195,9 @@ unsigned long long get_qixis_addr(void);
* 512MB aligned, so the min size to hide is 512MB.
*/
#if defined(CONFIG_FSL_MC_ENET) || defined(CONFIG_FSL_DEBUG_SERVER)
-#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024)
+#define CONFIG_SYS_DEBUG_SERVER_DRAM_BLOCK_MIN_SIZE (254UL * 1024 * 1024)
#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (256UL * 1024 * 1024)
-#define CONFIG_SYS_MEM_TOP_HIDE_MIN (512UL * 1024 * 1024)
-#define CONFIG_SYS_MEM_TOP_HIDE get_dram_size_to_hide()
+#define CONFIG_SYS_MC_RSV_MEM_ALIGN (512UL * 1024 * 1024)
#endif
/* PCIe */
@@ -290,10 +289,6 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
-#ifndef __ASSEMBLY__
-unsigned long get_dram_size_to_hide(void);
-#endif
-
#define CONFIG_PANIC_HANG /* do not reset board on panic */
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
MC and debug server are not board-specific. Move reserving memory to SoC file, using the new board_reserve_ram_top function. Reduce debug server memory by 2MB to make room for secure memory. In the system with MC and debug server, the top of u-boot memory is not the end of memory. PRAM is not used for this reservation. Signed-off-by: York Sun <yorksun@freescale.com> --- Changes in v5: Separated changes in board_f.c Changes in v4: Rebase to current master branch Changes in v3: Rename CONFIG_SYS_MC_RESERV_MEM_ALIGN to CONFIG_SYS_MC_RSV_MEM_ALIGN Check for unused CONFIG_SYS_MEM_TOP_HIDE if board_reserve_ram_top is used Use gd->ram_size = board_reserve_ram_top(gd->ram_size) format Use phys_size_t instead of ulong for ram_size calculation Changes in v2: Revise commit message. README | 4 ++-- arch/arm/cpu/armv8/fsl-layerscape/cpu.c | 21 +++++++++++++++++++++ board/freescale/ls2080a/ls2080a.c | 17 ----------------- board/freescale/ls2080aqds/ls2080aqds.c | 17 ----------------- board/freescale/ls2080ardb/ls2080ardb.c | 17 ----------------- include/configs/ls2080a_common.h | 9 ++------- 6 files changed, 25 insertions(+), 60 deletions(-)