diff mbox

ahci: compile out msi/msix infrastructure

Message ID 20151204195830.2300.48789.stgit@dwillia2-desk3.jf.intel.com
State Not Applicable
Delegated to: David Miller
Headers show

Commit Message

Dan Williams Dec. 4, 2015, 7:58 p.m. UTC
Quoting Arnd:
    The AHCI driver is used for some on-chip devices that do not use PCI
    for probing, and it can be built even when CONFIG_PCI is disabled, but
    that now results in a build failure:

    ata/libahci.c: In function 'ahci_host_activate_multi_irqs':
    ata/libahci.c:2475:4: error: invalid use of undefined type 'struct msix_entry'
    ata/libahci.c:2475:21: error: dereferencing pointer to incomplete type 'struct msix_entry'

Add ifdef CONFIG_PCI_MSI infrastructure to compile out the mutli-msi and
multi-msix code.

Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Fixes: d684a90d38e2 ("ahci: per-port msix support")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/ata/ahci.h    |   25 +++++++++++++++++++++++--
 drivers/ata/libahci.c |    7 +------
 2 files changed, 24 insertions(+), 8 deletions(-)


--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Arnd Bergmann Dec. 4, 2015, 9:46 p.m. UTC | #1
On Friday 04 December 2015 11:58:30 Dan Williams wrote:
> Quoting Arnd:
>     The AHCI driver is used for some on-chip devices that do not use PCI
>     for probing, and it can be built even when CONFIG_PCI is disabled, but
>     that now results in a build failure:
> 
>     ata/libahci.c: In function 'ahci_host_activate_multi_irqs':
>     ata/libahci.c:2475:4: error: invalid use of undefined type 'struct msix_entry'
>     ata/libahci.c:2475:21: error: dereferencing pointer to incomplete type 'struct msix_entry'
> 
> Add ifdef CONFIG_PCI_MSI infrastructure to compile out the mutli-msi and
> multi-msix code.
> 
> Reported-by: Arnd Bergmann <arnd@arndb.de>
> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
> Fixes: d684a90d38e2 ("ahci: per-port msix support")
> Signed-off-by: Dan Williams <dan.j.williams@intel.com>

Thanks a lot, looks good. I've verified that this fixes the build on the
configuration that failed earlier.

Tested-by: Arnd Bergmann <arnd@arndb.de>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Arnd Bergmann Dec. 5, 2015, 10:22 p.m. UTC | #2
On Friday 04 December 2015 11:58:30 Dan Williams wrote:
> +#ifdef CONFIG_PCI_MSI
> +static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
> +{
> +       if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
> +               return hpriv->msix[i].vector;
> +       else
> +               return hpriv->irq + i;
> +}
> 

My randconfig tests now noticed that 'i' is undeclared here. I suppose it
should be 'port' instead of 'i'?

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 878470f9c3e2..e3d888d4b6d0 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -237,12 +237,18 @@  enum {
 	AHCI_HFLAG_DELAY_ENGINE		= (1 << 15), /* do not start engine on
 						        port start (wait until
 						        error-handling stage) */
-	AHCI_HFLAG_MULTI_MSI		= (1 << 16), /* multiple PCI MSIs */
 	AHCI_HFLAG_NO_DEVSLP		= (1 << 17), /* no device sleep */
 	AHCI_HFLAG_NO_FBS		= (1 << 18), /* no FBS */
 	AHCI_HFLAG_EDGE_IRQ		= (1 << 19), /* HOST_IRQ_STAT behaves as
 							Edge Triggered */
-	AHCI_HFLAG_MULTI_MSIX		= (1 << 20), /* per-port MSI-X */
+#ifdef CONFIG_PCI_MSI
+	AHCI_HFLAG_MULTI_MSI		= (1 << 20), /* multiple PCI MSIs */
+	AHCI_HFLAG_MULTI_MSIX		= (1 << 21), /* per-port MSI-X */
+#else
+	/* compile out MSI infrastructure */
+	AHCI_HFLAG_MULTI_MSI		= 0,
+	AHCI_HFLAG_MULTI_MSIX		= 0,
+#endif
 
 	/* ap->flags bits */
 
@@ -355,6 +361,21 @@  struct ahci_host_priv {
 	void			(*start_engine)(struct ata_port *ap);
 };
 
+#ifdef CONFIG_PCI_MSI
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+	if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
+		return hpriv->msix[i].vector;
+	else
+		return hpriv->irq + i;
+}
+#else
+static inline int ahci_irq_vector(struct ahci_host_priv *hpriv, int port)
+{
+	return hpriv->irq;
+}
+#endif
+
 extern int ahci_ignore_sss;
 
 extern struct device_attribute *ahci_shost_attrs[];
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 1b6c7cc415bf..eda3cf2163bb 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -2469,12 +2469,7 @@  static int ahci_host_activate_multi_irqs(struct ata_host *host,
 	 */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ahci_port_priv *pp = host->ports[i]->private_data;
-		int irq;
-
-		if (hpriv->flags & AHCI_HFLAG_MULTI_MSIX)
-			irq = hpriv->msix[i].vector;
-		else
-			irq = hpriv->irq + i;
+		int irq = ahci_irq_vector(hpriv, i);
 
 		/* Do not receive interrupts sent by dummy ports */
 		if (!pp) {