diff mbox

[v2] lite5200: fix ethernet phy address

Message ID 1276154181-25534-1-git-send-email-dbaryshkov@gmail.com (mailing list archive)
State Accepted, archived
Delegated to: Grant Likely
Headers show

Commit Message

Dmitry Baryshkov June 10, 2010, 7:16 a.m. UTC 
According to my schematics, on Lite5200 board ethernet phy uses address
0 (all ADDR lines are pulled down). With this change I can talk to
onboard phy (LXT971) and correctly use autonegotiation.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: René Bürgel <r.buergel@unicontrol.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Yogesh Chaudhari <mr.yogesh@gmail.com>
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 arch/powerpc/boot/dts/lite5200.dts |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 82ff2b1..2b64d8e 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -230,8 +230,8 @@ 
 			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
 			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
 
-			phy0: ethernet-phy@1 {
-				reg = <1>;
+			phy0: ethernet-phy@0 {
+				reg = <0>;
 			};
 		};