Message ID | 1448371155-17307-2-git-send-email-nikita@compulab.co.il |
---|---|
State | Not Applicable, archived |
Headers | show |
On Tue, Nov 24, 2015 at 03:19:02PM +0200, Nikita Kiryanov wrote: > Add basic support for SBC-T43: a CM-T43 based single board computer. > CM-T43 is an AM437x based System-on-Module designed to serve as a building > block in embedded applications. SBC-T43 is composed of CM-T43 module on > top of the SB-SOM-T43 baseboard. > Basic support includes UART, GPIO, and I2C. > > Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> > Cc: Tony Lindgren <tony@atomide.com> > Cc: Igor Grinberg <grinberg@compulab.co.il> > Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Some minor nits below, otherwise: Acked-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/arm/omap/omap.txt | 6 ++ > arch/arm/boot/dts/Makefile | 6 +- > arch/arm/boot/dts/am437x-cm-t43.dts | 90 ++++++++++++++++++++++ > arch/arm/boot/dts/am437x-sbc-t43.dts | 57 ++++++++++++++ > 4 files changed, 157 insertions(+), 2 deletions(-) > create mode 100644 arch/arm/boot/dts/am437x-cm-t43.dts > create mode 100644 arch/arm/boot/dts/am437x-sbc-t43.dts > > diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt > index 9f4e513..da84372 100644 > --- a/Documentation/devicetree/bindings/arm/omap/omap.txt > +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt > @@ -141,6 +141,12 @@ Boards: > - OMAP5 EVM : Evaluation Module > compatible = "ti,omap5-evm", "ti,omap5" > > +- AM437x CM-T43 > + compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43" > + > +- AM437x SBC-T43 > + compatible = "compulab,am437x-sbc-t43","compulab,am437x-cm-t43","ti,am4372","ti,am43" ^ spaces > + > - AM43x EPOS EVM > compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43" > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index 30bbc37..dc3b9af 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -478,9 +478,11 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ > omap4-var-stk-om44.dtb > dtb-$(CONFIG_SOC_AM43XX) += \ > am43x-epos-evm.dtb \ > - am437x-sk-evm.dtb \ > + am437x-cm-t43.dtb \ > + am437x-gp-evm.dtb \ > am437x-idk-evm.dtb \ > - am437x-gp-evm.dtb > + am437x-sbc-t43.dtb \ > + am437x-sk-evm.dtb > dtb-$(CONFIG_SOC_OMAP5) += \ > omap5-cm-t54.dtb \ > omap5-igep0050.dtb \ > diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts > new file mode 100644 > index 0000000..69887c4 > --- /dev/null > +++ b/arch/arm/boot/dts/am437x-cm-t43.dts > @@ -0,0 +1,90 @@ > +/* > + * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/pinctrl/am43xx.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/interrupt-controller/irq.h> > +#include "am4372.dtsi" > + > +/ { > + model = "CompuLab CM-T43"; > + compatible = "compulab,am437x-cm-t43","ti,am4372","ti,am43"; ^ space [...] > diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts > new file mode 100644 > index 0000000..f3cd76b > --- /dev/null > +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts > @@ -0,0 +1,57 @@ > +/* > + * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include "am437x-cm-t43.dts" > + > +/ { > + model = "CompuLab CM-T43 on SB-SOM-T43"; > + compatible = "compulab,am437x-sbc-t43","compulab,am437x-cm-t43","ti,am4372","ti,am43"; spaces -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Nov 25, 2015 at 05:03:00PM -0600, Rob Herring wrote: > On Tue, Nov 24, 2015 at 03:19:02PM +0200, Nikita Kiryanov wrote: > > Add basic support for SBC-T43: a CM-T43 based single board computer. > > CM-T43 is an AM437x based System-on-Module designed to serve as a building > > block in embedded applications. SBC-T43 is composed of CM-T43 module on > > top of the SB-SOM-T43 baseboard. > > Basic support includes UART, GPIO, and I2C. > > > > Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> > > Cc: Tony Lindgren <tony@atomide.com> > > Cc: Igor Grinberg <grinberg@compulab.co.il> > > Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> > > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> > > Some minor nits below, otherwise: > > Acked-by: Rob Herring <robh@kernel.org> > V2 coming up. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
* Nikita Kiryanov <nikita@compulab.co.il> [151124 05:20]: > +&uart0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart0_pins_default>; > +}; > + Please get rid of the extra line at the end of the file.. It will cause whitespace warnings when applying and will also cause issues applying other changes at the end of the file if they rely on the extra line. And check the whole series, thanks :) It will make my life a bit easier. And the Subject line should start with "ARM: dts: ..." for the unified look. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index 9f4e513..da84372 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -141,6 +141,12 @@ Boards: - OMAP5 EVM : Evaluation Module compatible = "ti,omap5-evm", "ti,omap5" +- AM437x CM-T43 + compatible = "compulab,am437x-cm-t43", "ti,am4372", "ti,am43" + +- AM437x SBC-T43 + compatible = "compulab,am437x-sbc-t43","compulab,am437x-cm-t43","ti,am4372","ti,am43" + - AM43x EPOS EVM compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 30bbc37..dc3b9af 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -478,9 +478,11 @@ dtb-$(CONFIG_ARCH_OMAP4) += \ omap4-var-stk-om44.dtb dtb-$(CONFIG_SOC_AM43XX) += \ am43x-epos-evm.dtb \ - am437x-sk-evm.dtb \ + am437x-cm-t43.dtb \ + am437x-gp-evm.dtb \ am437x-idk-evm.dtb \ - am437x-gp-evm.dtb + am437x-sbc-t43.dtb \ + am437x-sk-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += \ omap5-cm-t54.dtb \ omap5-igep0050.dtb \ diff --git a/arch/arm/boot/dts/am437x-cm-t43.dts b/arch/arm/boot/dts/am437x-cm-t43.dts new file mode 100644 index 0000000..69887c4 --- /dev/null +++ b/arch/arm/boot/dts/am437x-cm-t43.dts @@ -0,0 +1,90 @@ +/* + * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include <dt-bindings/pinctrl/am43xx.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "am4372.dtsi" + +/ { + model = "CompuLab CM-T43"; + compatible = "compulab,am437x-cm-t43","ti,am4372","ti,am43"; + + leds { + compatible = "gpio-leds"; + + ledb { + label = "cm-t43:green"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&am43xx_pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&cm_t43_led_pins>; + + cm_t43_led_pins: cm_t43_led_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0xa78, MUX_MODE7) + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <100000>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio2 { + status = "okay"; +}; + +&gpio3 { + status = "okay"; +}; + +&gpio4 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&cpu { + operating-points = <1000000 1330000>, + <800000 1260000>, + <720000 1200000>, + <600000 1100000>, + <300000 950000>; +}; diff --git a/arch/arm/boot/dts/am437x-sbc-t43.dts b/arch/arm/boot/dts/am437x-sbc-t43.dts new file mode 100644 index 0000000..f3cd76b --- /dev/null +++ b/arch/arm/boot/dts/am437x-sbc-t43.dts @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2015 CompuLab, Ltd. - http://www.compulab.co.il/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "am437x-cm-t43.dts" + +/ { + model = "CompuLab CM-T43 on SB-SOM-T43"; + compatible = "compulab,am437x-sbc-t43","compulab,am437x-cm-t43","ti,am4372","ti,am43"; +}; + +&am43xx_pinmux { + uart0_pins_default: uart0_pins_default { + pinctrl-single,pins = < + AM4372_IOPAD(0x968, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) + AM4372_IOPAD(0x96C, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE0) + AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + AM4372_IOPAD(0x974, PIN_INPUT | PULL_DISABLE | SLEWCTRL_FAST | DS0_PULL_UP_DOWN_EN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + i2c1_pins: i2c1_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0xa6c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_cs0.i2c1_sda */ + AM4372_IOPAD(0xa60, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE1) /* spi2_sclk.i2c1_scl */ + >; + }; + + i2c2_pins: i2c2_pins { + pinctrl-single,pins = < + AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_ctsn.i2c2_sda */ + AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE3) /* uart1_rtsn.i2c2_scl */ + >; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_default>; +}; +
Add basic support for SBC-T43: a CM-T43 based single board computer. CM-T43 is an AM437x based System-on-Module designed to serve as a building block in embedded applications. SBC-T43 is composed of CM-T43 module on top of the SB-SOM-T43 baseboard. Basic support includes UART, GPIO, and I2C. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Tony Lindgren <tony@atomide.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Dmitry Lifshitz <lifshitz@compulab.co.il> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> --- .../devicetree/bindings/arm/omap/omap.txt | 6 ++ arch/arm/boot/dts/Makefile | 6 +- arch/arm/boot/dts/am437x-cm-t43.dts | 90 ++++++++++++++++++++++ arch/arm/boot/dts/am437x-sbc-t43.dts | 57 ++++++++++++++ 4 files changed, 157 insertions(+), 2 deletions(-) create mode 100644 arch/arm/boot/dts/am437x-cm-t43.dts create mode 100644 arch/arm/boot/dts/am437x-sbc-t43.dts