Message ID | 1448148508-17207-10-git-send-email-sjg@chromium.org |
---|---|
State | Superseded |
Delegated to: | Simon Glass |
Headers | show |
Hi Simon, On Sun, Nov 22, 2015 at 7:28 AM, Simon Glass <sjg@chromium.org> wrote: > Currently we use switch() and access PCI configuration via several > functions, one for each data size. Adjust the code to use generic functions, > where the data size is a parameter. > > Signed-off-by: Simon Glass <sjg@chromium.org> > --- > > Changes in v2: > - Add back the leading 0 in the printf() statements > > common/cmd_pci.c | 49 +++++++++++++++---------------------------------- > 1 file changed, 15 insertions(+), 34 deletions(-) > > diff --git a/common/cmd_pci.c b/common/cmd_pci.c > index 7b83c1d..51e1f1c 100644 > --- a/common/cmd_pci.c > +++ b/common/cmd_pci.c > @@ -325,7 +325,8 @@ static pci_dev_t get_pci_dev(char *name) > return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]); > } > > -static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length) > +static int pci_cfg_display(pci_dev_t bdf, ulong addr, enum pci_size_t size, Here parameter 'size' has been changed from 1/2/4 to type enum pci_size_t whose valid number is 0/1/2. > + ulong length) > { > #define DISP_LINE_LEN 16 > ulong i, nbytes, linebytes; The following two lines will cause divide by zero exception when size is 0. 335 if (length == 0) 336 length = 0x40 / size; /* Standard PCI configuration space */ > @@ -339,23 +340,13 @@ static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length) > */ > nbytes = length * size; And here nbytes is not correct too. > do { > - uint val4; > - ushort val2; > - u_char val1; > - > printf("%08lx:", addr); > linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; > for (i=0; i<linebytes; i+= size) { > - if (size == 4) { > - pci_read_config_dword(bdf, addr, &val4); > - printf(" %08x", val4); > - } else if (size == 2) { > - pci_read_config_word(bdf, addr, &val2); > - printf(" %04x", val2); > - } else { > - pci_read_config_byte(bdf, addr, &val1); > - printf(" %02x", val1); > - } > + unsigned long val; > + > + val = pci_read_config(bdf, addr, size); > + printf(" %0*lx", pci_field_width(size), val); > addr += size; > } > printf("\n"); > @@ -385,32 +376,20 @@ static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value) > return 0; > } > > -static int > -pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag) > +static int pci_cfg_modify(pci_dev_t bdf, ulong addr, enum pci_size_t size, > + ulong value, int incrflag) > { > ulong i; > int nbytes; > - uint val4; > - ushort val2; > - u_char val1; > + ulong val; > > /* Print the address, followed by value. Then accept input for > * the next value. A non-converted value exits. > */ > do { > printf("%08lx:", addr); > - if (size == 4) { > - pci_read_config_dword(bdf, addr, &val4); > - printf(" %08x", val4); > - } > - else if (size == 2) { > - pci_read_config_word(bdf, addr, &val2); > - printf(" %04x", val2); > - } > - else { > - pci_read_config_byte(bdf, addr, &val1); > - printf(" %02x", val1); > - } > + val = pci_read_config(bdf, addr, size); > + printf(" %0*lx", pci_field_width(size), val); > > nbytes = cli_readline(" ? "); > if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) { > @@ -456,7 +435,8 @@ pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag > */ > static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > { > - ulong addr = 0, value = 0, size = 0; > + ulong addr = 0, value = 0, cmd_size = 0; > + enum pci_size_t size; > int busnum = 0; > pci_dev_t bdf = 0; > char cmd = 's'; > @@ -471,7 +451,8 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) > case 'm': /* modify */ > case 'w': /* write */ > /* Check for a size specification. */ > - size = cmd_get_data_size(argv[1], 4); > + cmd_size = cmd_get_data_size(argv[1], 4); > + size = (cmd_size == 4) ? PCI_SIZE_32 : size - 1; This is wrong, should be: size = (cmd_size == 4) ? PCI_SIZE_32 : cmd_size - 1; > if (argc > 3) > addr = simple_strtoul(argv[3], NULL, 16); > if (argc > 4) > -- Regards, Bin
diff --git a/common/cmd_pci.c b/common/cmd_pci.c index 7b83c1d..51e1f1c 100644 --- a/common/cmd_pci.c +++ b/common/cmd_pci.c @@ -325,7 +325,8 @@ static pci_dev_t get_pci_dev(char *name) return PCI_BDF(bdfs[0], bdfs[1], bdfs[2]); } -static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length) +static int pci_cfg_display(pci_dev_t bdf, ulong addr, enum pci_size_t size, + ulong length) { #define DISP_LINE_LEN 16 ulong i, nbytes, linebytes; @@ -339,23 +340,13 @@ static int pci_cfg_display(pci_dev_t bdf, ulong addr, ulong size, ulong length) */ nbytes = length * size; do { - uint val4; - ushort val2; - u_char val1; - printf("%08lx:", addr); linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes; for (i=0; i<linebytes; i+= size) { - if (size == 4) { - pci_read_config_dword(bdf, addr, &val4); - printf(" %08x", val4); - } else if (size == 2) { - pci_read_config_word(bdf, addr, &val2); - printf(" %04x", val2); - } else { - pci_read_config_byte(bdf, addr, &val1); - printf(" %02x", val1); - } + unsigned long val; + + val = pci_read_config(bdf, addr, size); + printf(" %0*lx", pci_field_width(size), val); addr += size; } printf("\n"); @@ -385,32 +376,20 @@ static int pci_cfg_write (pci_dev_t bdf, ulong addr, ulong size, ulong value) return 0; } -static int -pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag) +static int pci_cfg_modify(pci_dev_t bdf, ulong addr, enum pci_size_t size, + ulong value, int incrflag) { ulong i; int nbytes; - uint val4; - ushort val2; - u_char val1; + ulong val; /* Print the address, followed by value. Then accept input for * the next value. A non-converted value exits. */ do { printf("%08lx:", addr); - if (size == 4) { - pci_read_config_dword(bdf, addr, &val4); - printf(" %08x", val4); - } - else if (size == 2) { - pci_read_config_word(bdf, addr, &val2); - printf(" %04x", val2); - } - else { - pci_read_config_byte(bdf, addr, &val1); - printf(" %02x", val1); - } + val = pci_read_config(bdf, addr, size); + printf(" %0*lx", pci_field_width(size), val); nbytes = cli_readline(" ? "); if (nbytes == 0 || (nbytes == 1 && console_buffer[0] == '-')) { @@ -456,7 +435,8 @@ pci_cfg_modify (pci_dev_t bdf, ulong addr, ulong size, ulong value, int incrflag */ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr = 0, value = 0, size = 0; + ulong addr = 0, value = 0, cmd_size = 0; + enum pci_size_t size; int busnum = 0; pci_dev_t bdf = 0; char cmd = 's'; @@ -471,7 +451,8 @@ static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) case 'm': /* modify */ case 'w': /* write */ /* Check for a size specification. */ - size = cmd_get_data_size(argv[1], 4); + cmd_size = cmd_get_data_size(argv[1], 4); + size = (cmd_size == 4) ? PCI_SIZE_32 : size - 1; if (argc > 3) addr = simple_strtoul(argv[3], NULL, 16); if (argc > 4)
Currently we use switch() and access PCI configuration via several functions, one for each data size. Adjust the code to use generic functions, where the data size is a parameter. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v2: - Add back the leading 0 in the printf() statements common/cmd_pci.c | 49 +++++++++++++++---------------------------------- 1 file changed, 15 insertions(+), 34 deletions(-)