@@ -464,36 +464,40 @@ static void free_list(struct net_device *dev)
}
}
+static void rio_reset_ring(struct netdev_private *np)
+{
+ int i;
+
+ np->cur_rx = 0;
+ np->cur_tx = 0;
+ np->old_rx = 0;
+ np->old_tx = 0;
+
+ for (i = 0; i < TX_RING_SIZE; i++)
+ np->tx_ring[i].status = cpu_to_le64(TFDDone);
+
+ for (i = 0; i < RX_RING_SIZE; i++)
+ np->rx_ring[i].status = 0;
+}
+
/* allocate and initialize Tx and Rx descriptors */
static int alloc_list(struct net_device *dev)
{
struct netdev_private *np = netdev_priv(dev);
int i;
- np->cur_rx = np->cur_tx = 0;
- np->old_rx = np->old_tx = 0;
+ rio_reset_ring(np);
np->rx_buf_sz = (dev->mtu <= 1500 ? PACKET_SIZE : dev->mtu + 32);
/* Initialize Tx descriptors, TFDListPtr leaves in start_xmit(). */
for (i = 0; i < TX_RING_SIZE; i++) {
np->tx_skbuff[i] = NULL;
- np->tx_ring[i].status = cpu_to_le64(TFDDone);
np->tx_ring[i].next_desc = cpu_to_le64(np->tx_ring_dma +
((i + 1) % TX_RING_SIZE) *
sizeof(struct netdev_desc));
}
- /* Initialize Rx descriptors */
- for (i = 0; i < RX_RING_SIZE; i++) {
- np->rx_ring[i].next_desc = cpu_to_le64(np->rx_ring_dma +
- ((i + 1) % RX_RING_SIZE) *
- sizeof(struct netdev_desc));
- np->rx_ring[i].status = 0;
- np->rx_ring[i].fraginfo = 0;
- np->rx_skbuff[i] = NULL;
- }
-
- /* Allocate the rx buffers */
+ /* Initialize Rx descriptors & allocate buffers */
for (i = 0; i < RX_RING_SIZE; i++) {
/* Allocated fixed size of skbuff */
struct sk_buff *skb;
@@ -505,6 +509,9 @@ static int alloc_list(struct net_device *dev)
return -ENOMEM;
}
+ np->rx_ring[i].next_desc = cpu_to_le64(np->rx_ring_dma +
+ ((i + 1) % RX_RING_SIZE) *
+ sizeof(struct netdev_desc));
/* Rubicon now supports 40 bits of addressing space. */
np->rx_ring[i].fraginfo =
cpu_to_le64(pci_map_single(
@@ -1824,11 +1831,55 @@ rio_remove1 (struct pci_dev *pdev)
}
}
+#ifdef CONFIG_PM_SLEEP
+static int rio_suspend(struct device *device)
+{
+ struct net_device *dev = dev_get_drvdata(device);
+ struct netdev_private *np = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ netif_device_detach(dev);
+ del_timer_sync(&np->timer);
+ rio_hw_stop(dev);
+
+ return 0;
+}
+
+static int rio_resume(struct device *device)
+{
+ struct net_device *dev = dev_get_drvdata(device);
+ struct netdev_private *np = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return 0;
+
+ rio_reset_ring(np);
+ rio_hw_init(dev);
+ np->timer.expires = jiffies + 1 * HZ;
+ add_timer(&np->timer);
+ netif_device_attach(dev);
+ dl2k_enable_int(np);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(rio_pm_ops, rio_suspend, rio_resume);
+#define RIO_PM_OPS (&rio_pm_ops)
+
+#else
+
+#define RIO_PM_OPS NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
static struct pci_driver rio_driver = {
.name = "dl2k",
.id_table = rio_pci_tbl,
.probe = rio_probe1,
.remove = rio_remove1,
+ .driver.pm = RIO_PM_OPS,
};
module_pci_driver(rio_driver);
Add suspend/resume support to dl2k driver. This requires RX/TX rings to be reset so split out the required functionality from alloc_list() into new rio_reset_ring(). Tested on Asus NX1101 (IP1000A) and D-Link DGE-550T (DL-2000). Signed-off-by: Ondrej Zary <linux@rainbow-software.org> --- drivers/net/ethernet/dlink/dl2k.c | 79 ++++++++++++++++++++++++++++++------- 1 file changed, 65 insertions(+), 14 deletions(-)