[v2,6/7] Documentation: Rename gpio controller name from cygnus to iproc
diff mbox

Message ID 1447905139-16002-7-git-send-email-pramodku@broadcom.com
State New
Headers show

Commit Message

Pramod Kumar Nov. 19, 2015, 3:52 a.m. UTC
Renamed gpio controller's driver name from cygnus to iproc to make it
more generic so that all iProc based SoCs having the same gpio controller
could use this.

Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
Reviewed-by: Ray Jui <rjui@broadcom.com>
Reviewed-by: Scott Branden <sbranden@broadcom.com>
---
 .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt}    | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} (97%)

Comments

Rob Herring Nov. 20, 2015, 3:34 p.m. UTC | #1
On Thu, Nov 19, 2015 at 09:22:18AM +0530, Pramod Kumar wrote:
> Renamed gpio controller's driver name from cygnus to iproc to make it
> more generic so that all iProc based SoCs having the same gpio controller
> could use this.
> 
> Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
> Reviewed-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>

Where's my ack?

> ---
>  .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt}    | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>  rename Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt} (97%)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> similarity index 97%
> rename from Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> rename to Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> index 8b1e5d1..e427792 100644
> --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> @@ -1,4 +1,4 @@
> -Broadcom Cygnus GPIO/PINCONF Controller
> +Broadcom iProc GPIO/PINCONF Controller
>  
>  Required properties:
>  
> @@ -7,7 +7,7 @@ Required properties:
>      "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
>  
>  - reg:
> -    Define the base and range of the I/O address space that contains the Cygnus
> +    Define the base and range of the I/O address space that contains SoC
>  GPIO/PINCONF controller registers
>  
>  - ngpios:
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Pramod Kumar Nov. 20, 2015, 5:03 p.m. UTC | #2
Hi Rob,

> -----Original Message-----
> From: Rob Herring [mailto:robh@kernel.org]
> Sent: 20 November 2015 21:05
> To: Pramod Kumar
> Cc: Pawel Moll; Mark Rutland; Ian Campbell; Kumar Gala; Ray Jui; Scott Branden;
> Russell King; Linus Walleij; linux-gpio@vger.kernel.org; bcm-kernel-feedback-
> list; Jason Uy; Masahiro Yamada; Thomas Gleixner; Laurent Pinchart;
> devicetree@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-
> kernel@vger.kernel.org; Jonas Gorski
> Subject: Re: [PATCH v2 6/7] Documentation: Rename gpio controller name from
> cygnus to iproc
> 
> On Thu, Nov 19, 2015 at 09:22:18AM +0530, Pramod Kumar wrote:
> > Renamed gpio controller's driver name from cygnus to iproc to make it
> > more generic so that all iProc based SoCs having the same gpio
> > controller could use this.
> >
> > Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
> > Reviewed-by: Ray Jui <rjui@broadcom.com>
> > Reviewed-by: Scott Branden <sbranden@broadcom.com>
> 
> Where's my ack?

Somehow it got missed. I'm sincerely apologetic for it. Will add it.  

Regards,
Pramod
> 
> > ---
> >  .../bindings/pinctrl/{brcm,cygnus-gpio.txt => brcm,iproc-gpio.txt}    | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)  rename
> > Documentation/devicetree/bindings/pinctrl/{brcm,cygnus-gpio.txt =>
> > brcm,iproc-gpio.txt} (97%)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > similarity index 97%
> > rename from
> > Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > rename to
> > Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > index 8b1e5d1..e427792 100644
> > --- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
> > +++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
> > @@ -1,4 +1,4 @@
> > -Broadcom Cygnus GPIO/PINCONF Controller
> > +Broadcom iProc GPIO/PINCONF Controller
> >
> >  Required properties:
> >
> > @@ -7,7 +7,7 @@ Required properties:
> >      "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
> >
> >  - reg:
> > -    Define the base and range of the I/O address space that contains the
> Cygnus
> > +    Define the base and range of the I/O address space that contains
> > + SoC
> >  GPIO/PINCONF controller registers
> >
> >  - ngpios:
> > --
> > 1.9.1
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Linus Walleij Nov. 30, 2015, 8:43 a.m. UTC | #3
On Thu, Nov 19, 2015 at 4:52 AM, Pramod Kumar <pramodku@broadcom.com> wrote:

> Renamed gpio controller's driver name from cygnus to iproc to make it
> more generic so that all iProc based SoCs having the same gpio controller
> could use this.
>
> Signed-off-by: Pramod Kumar <pramodku@broadcom.com>
> Reviewed-by: Ray Jui <rjui@broadcom.com>
> Reviewed-by: Scott Branden <sbranden@broadcom.com>

Patch applied. Added Rob Herring's ACK.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
similarity index 97%
rename from Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
rename to Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
index 8b1e5d1..e427792 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,cygnus-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,iproc-gpio.txt
@@ -1,4 +1,4 @@ 
-Broadcom Cygnus GPIO/PINCONF Controller
+Broadcom iProc GPIO/PINCONF Controller
 
 Required properties:
 
@@ -7,7 +7,7 @@  Required properties:
     "brcm,cygnus-crmu-gpio" or "brcm,iproc-gpio"
 
 - reg:
-    Define the base and range of the I/O address space that contains the Cygnus
+    Define the base and range of the I/O address space that contains SoC
 GPIO/PINCONF controller registers
 
 - ngpios: