[v7,1/5] Documentation: tps65912: Add DT bindings for the TPS65912 PMIC
diff mbox

Message ID 1447869580-10416-2-git-send-email-afd@ti.com
State New
Headers show

Commit Message

Andrew F. Davis Nov. 18, 2015, 5:59 p.m. UTC
The TPS65912 PMIC contains several regulators and a GPIO controller.
Add bindings for the TPS65912 PMIC.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 Documentation/devicetree/bindings/mfd/tps65912.txt | 50 ++++++++++++++++++++++
 1 file changed, 50 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt

Comments

Rob Herring Nov. 18, 2015, 9:14 p.m. UTC | #1
On Wed, Nov 18, 2015 at 11:59:36AM -0600, Andrew F. Davis wrote:
> The TPS65912 PMIC contains several regulators and a GPIO controller.
> Add bindings for the TPS65912 PMIC.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  Documentation/devicetree/bindings/mfd/tps65912.txt | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
> new file mode 100644
> index 0000000..717e66d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
> @@ -0,0 +1,50 @@
> +* TPS65912 Power Management Integrated Circuit bindings
> +
> +Required properties:
> + - compatible		: Should be "ti,tps65912".
> + - reg			: Slave address or chip select number (I2C / SPI).
> + - interrupt-parent	: The parent interrupt controller.
> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: Marks the device node as an interrupt controller.
> + - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
> +			    The first cell is the IRQ number.
> +			    The second cell is the flags, encoded as trigger
> +			    masks from ../interrupt-controller/interrupts.txt.
> + - gpio-controller	: Marks the device node as a GPIO Controller.
> + - #gpio-cells		: Should be two.  The first cell is the pin number and
> +			    the second cell is used to specify flags.
> +			    See ../gpio/gpio.txt for more information.
> + - regulators:		: List of child nodes that specify the regulator
> +			    initialization data. Child nodes must be named
> +			    after their hardware counterparts: dcdc[1-4] and
> +			    ldo[1-10]. Each child nodes is defined using the
> +			    standard binding for regulators.
> +
> +Example:
> +
> +	pmic: tps65912@2d {
> +		compatible = "ti,tps65912";
> +		reg = <0x2d>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		regulators {
> +			dcdc1 {
> +				regulator-name = "vdd_core";
> +				regulator-min-microvolt = <912000>;
> +				regulator-max-microvolt = <1144000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1 {
> +				regulator-name = "ldo1";
> +				regulator-min-microvolt = <1900000>;
> +				regulator-max-microvolt = <1900000>;
> +			};
> +		};
> +	};
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Lee Jones Nov. 24, 2015, 4:25 p.m. UTC | #2
On Wed, 18 Nov 2015, Andrew F. Davis wrote:

> The TPS65912 PMIC contains several regulators and a GPIO controller.
> Add bindings for the TPS65912 PMIC.
> 
> Signed-off-by: Andrew F. Davis <afd@ti.com>
> ---
>  Documentation/devicetree/bindings/mfd/tps65912.txt | 50 ++++++++++++++++++++++
>  1 file changed, 50 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/tps65912.txt

For my own reference:
  Acked-by: Lee Jones <lee.jones@linaro.org>

> diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
> new file mode 100644
> index 0000000..717e66d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
> @@ -0,0 +1,50 @@
> +* TPS65912 Power Management Integrated Circuit bindings
> +
> +Required properties:
> + - compatible		: Should be "ti,tps65912".
> + - reg			: Slave address or chip select number (I2C / SPI).
> + - interrupt-parent	: The parent interrupt controller.
> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: Marks the device node as an interrupt controller.
> + - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
> +			    The first cell is the IRQ number.
> +			    The second cell is the flags, encoded as trigger
> +			    masks from ../interrupt-controller/interrupts.txt.
> + - gpio-controller	: Marks the device node as a GPIO Controller.
> + - #gpio-cells		: Should be two.  The first cell is the pin number and
> +			    the second cell is used to specify flags.
> +			    See ../gpio/gpio.txt for more information.
> + - regulators:		: List of child nodes that specify the regulator
> +			    initialization data. Child nodes must be named
> +			    after their hardware counterparts: dcdc[1-4] and
> +			    ldo[1-10]. Each child nodes is defined using the
> +			    standard binding for regulators.
> +
> +Example:
> +
> +	pmic: tps65912@2d {
> +		compatible = "ti,tps65912";
> +		reg = <0x2d>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		regulators {
> +			dcdc1 {
> +				regulator-name = "vdd_core";
> +				regulator-min-microvolt = <912000>;
> +				regulator-max-microvolt = <1144000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			ldo1 {
> +				regulator-name = "ldo1";
> +				regulator-min-microvolt = <1900000>;
> +				regulator-max-microvolt = <1900000>;
> +			};
> +		};
> +	};
Linus Walleij Dec. 1, 2015, 9:56 a.m. UTC | #3
On Wed, Nov 18, 2015 at 6:59 PM, Andrew F. Davis <afd@ti.com> wrote:

> The TPS65912 PMIC contains several regulators and a GPIO controller.
> Add bindings for the TPS65912 PMIC.
>
> Signed-off-by: Andrew F. Davis <afd@ti.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/Documentation/devicetree/bindings/mfd/tps65912.txt b/Documentation/devicetree/bindings/mfd/tps65912.txt
new file mode 100644
index 0000000..717e66d
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/tps65912.txt
@@ -0,0 +1,50 @@ 
+* TPS65912 Power Management Integrated Circuit bindings
+
+Required properties:
+ - compatible		: Should be "ti,tps65912".
+ - reg			: Slave address or chip select number (I2C / SPI).
+ - interrupt-parent	: The parent interrupt controller.
+ - interrupts		: The interrupt line the device is connected to.
+ - interrupt-controller	: Marks the device node as an interrupt controller.
+ - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
+			    The first cell is the IRQ number.
+			    The second cell is the flags, encoded as trigger
+			    masks from ../interrupt-controller/interrupts.txt.
+ - gpio-controller	: Marks the device node as a GPIO Controller.
+ - #gpio-cells		: Should be two.  The first cell is the pin number and
+			    the second cell is used to specify flags.
+			    See ../gpio/gpio.txt for more information.
+ - regulators:		: List of child nodes that specify the regulator
+			    initialization data. Child nodes must be named
+			    after their hardware counterparts: dcdc[1-4] and
+			    ldo[1-10]. Each child nodes is defined using the
+			    standard binding for regulators.
+
+Example:
+
+	pmic: tps65912@2d {
+		compatible = "ti,tps65912";
+		reg = <0x2d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		regulators {
+			dcdc1 {
+				regulator-name = "vdd_core";
+				regulator-min-microvolt = <912000>;
+				regulator-max-microvolt = <1144000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1900000>;
+				regulator-max-microvolt = <1900000>;
+			};
+		};
+	};