diff mbox

[U-Boot,v2,11/15] board/keymile/km82xx: setting dip_switch 3 and 4 will run bootloader

Message ID 1447754018-12365-12-git-send-email-valentin.longchamp@keymile.com
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Valentin Longchamp Nov. 17, 2015, 9:53 a.m. UTC 
From: Bagavathiannan Palanisamy <Bagavathiannan.Palanisamy@keymile.com>

Setting dip_switch 3 and 4 also will run bootloader in COGE3 and COGE6
It is required remove local mgmt IP address, when DIP Switch PIN3 is
enabled. DIP Switch 4 also enabled to avoid u-boot update in future
for DIP switch enhancements.

Signed-off-by: Bagavathiannan Palanisamy <Bagavathiannan.Palanisamy@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
---

Changes in v2: None

 board/keymile/km82xx/km82xx.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Tom Rini Nov. 18, 2015, 10:37 p.m. UTC | #1 
On Tue, Nov 17, 2015 at 10:53:34AM +0100, Valentin Longchamp wrote:

> From: Bagavathiannan Palanisamy <Bagavathiannan.Palanisamy@keymile.com>
> 
> Setting dip_switch 3 and 4 also will run bootloader in COGE3 and COGE6
> It is required remove local mgmt IP address, when DIP Switch PIN3 is
> enabled. DIP Switch 4 also enabled to avoid u-boot update in future
> for DIP switch enhancements.
> 
> Signed-off-by: Bagavathiannan Palanisamy <Bagavathiannan.Palanisamy@keymile.com>
> Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>

Applied to u-boot/master, thanks!
diff mbox

Patch

diff --git a/board/keymile/km82xx/km82xx.c b/board/keymile/km82xx/km82xx.c
index 01a3c20..9e285ec 100644
--- a/board/keymile/km82xx/km82xx.c
+++ b/board/keymile/km82xx/km82xx.c
@@ -329,8 +329,8 @@  int last_stage_init(void)
 
 	dip_switch = in_8(&base->mswitch);
 	dip_switch &= BFTICU_DIPSWITCH_MASK;
-	/* dip switch 'full reset' or 'db erase' */
-	if (dip_switch & 0x1 || dip_switch & 0x2) {
+	/* dip switch 'full reset' or 'db erase' or 'Local mgmt IP' or any */
+	if (dip_switch != 0) {
 		/* start bootloader */
 		puts("DIP:   Enabled\n");
 		setenv("actual_bank", "0");