| Message ID | 1447370093-31509-1-git-send-email-kamal@canonical.com |
|---|---|
| State | New |
| Headers | show |
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts index dcd2f5d..3e305b0 100644 --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -240,11 +240,12 @@ /* SMPS9 unused */ ldo1_reg: ldo1 { - /* VDD_SD */ + /* VDD_SD / VDDSHV8 */ regulator-name = "ldo1"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; + regulator-always-on; }; ldo2_reg: ldo2 {
This is a note to let you know that I have just added a patch titled ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on to the linux-3.19.y-queue branch of the 3.19.y-ckt extended stable tree which can be found at: http://kernel.ubuntu.com/git/ubuntu/linux.git/log/?h=linux-3.19.y-queue This patch is scheduled to be released in version 3.19.8-ckt10. If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.19.y-ckt tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Kamal ------ From 1333e37eb0d8b215c7be213785f281eb3df44078 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen <tomi.valkeinen@ti.com> Date: Fri, 25 Sep 2015 16:02:03 +0300 Subject: [PATCH 099/120] ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on commit 7e381ec6a36aa44f15fc1a76e6efb9e2cd942e61 upstream. LDO1 regulator (VDD_SD) is connected to SoC's vddshv8. vddshv8 needs to be kept always powered (see commit 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15"), but at the moment VDD_SD is enabled/disabled depending on whether an SD card is inserted or not. This patch sets LDO1 regulator to always-on. This patch has a side effect of fixing another issue, HDMI DDC not working when SD card is not inserted: Why this happens is that the tpd12s015 (HDMI level shifter/ESD protection chip) has LS_OE GPIO input, which needs to be enabled for the HDMI DDC to work. LS_OE comes from gpio6_28. The pin that provides gpio6_28 is powered by vddshv8, and vddshv8 comes from VDD_SD. So when SD card is not inserted, VDD_SD is disabled, and LS_OE stays off. The proper fix for the HDMI DDC issue would be to maybe have the pinctrl framework manage the pin specific power. Apparently this fixes also a third issue (copy paste from Kishon's patch): ldo1_reg in addition to being connected to the io lines is also connected to the card detect line. On card removal, omap_hsmmc driver does a regulator_disable causing card detect line to be pulled down. This raises a card insertion interrupt and once the MMC core detects there is no card inserted, it does a regulator disable which again raises a card insertion interrupt. This happens in a loop causing infinite MMC interrupts. Fixes: 5a0f93c6576a ("ARM: dts: Add am57xx-beagle-x15") Cc: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Louis McCarthy <compeoree@gmail.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kamal Mostafa <kamal@canonical.com> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) -- 1.9.1