[2/2,V2] drivers/gpio: Port gpio driver to layerscape platform
diff mbox

Message ID 1446691342-1943-2-git-send-email-Gang.Liu@freescale.com
State New
Headers show

Commit Message

Liu Gang Nov. 5, 2015, 2:42 a.m. UTC
Layerscape has the same ip block/controller as
GPIO on powerpc platform(MPC8XXX).

So use portable i/o accessors, as in_be32/out_be32
accessors are Power architecture specific whereas
ioread32/iowrite32 and ioread32be/iowrite32be are
available in other architectures.

Layerscape GPIO controller's registers may be big
or little endian, so the code needs to get the
endian property from DTB, then make additional
functions to fit right register read/write
operations.

Currently the code can support ls2080a GPIO with
little endian registers. And it can also work well
on other layerscape platform with big endian GPIO
registers.

Signed-off-by: Liu Gang <Gang.Liu@freescale.com>
Signed-off-by: Shaveta Leekha <shaveta@freescale.com>
---
V2 changes: Add '|| COMPILE_TEST' based on Arnd's comments.

 drivers/gpio/Kconfig        |  6 ++--
 drivers/gpio/gpio-mpc8xxx.c | 87 +++++++++++++++++++++++++++++++++------------
 2 files changed, 67 insertions(+), 26 deletions(-)

Comments

Liu Gang Nov. 11, 2015, 6:42 a.m. UTC | #1
Hi, Arnd,

Do you have more comments for the V2 patch, or could you please ack the patch?

Thanks!
Liu Gang
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch
diff mbox

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8949b3f..8d4f159 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -290,12 +290,12 @@  config GPIO_MPC5200
 	depends on PPC_MPC52xx
 
 config GPIO_MPC8XXX
-	bool "MPC512x/MPC8xxx GPIO support"
+	bool "MPC512x/MPC8xxx/QorIQ GPIO support"
 	depends on PPC_MPC512x || PPC_MPC831x || PPC_MPC834x || PPC_MPC837x || \
-		   FSL_SOC_BOOKE || PPC_86xx
+		   FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || COMPILE_TEST
 	help
 	  Say Y here if you're going to use hardware that connects to the
-	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
+	  MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs.
 
 config GPIO_MSM_V2
 	tristate "Qualcomm MSM GPIO v2"
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 48ef368..eb7a1ca 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -1,5 +1,5 @@ 
 /*
- * GPIOs on MPC512x/8349/8572/8610 and compatible
+ * GPIOs on MPC512x/8349/8572/8610/QorIQ and compatible
  *
  * Copyright (C) 2008 Peter Korsgaard <jacmet@sunsite.dk>
  *
@@ -19,6 +19,7 @@ 
 #include <linux/gpio.h>
 #include <linux/slab.h>
 #include <linux/irq.h>
+#include <linux/irqdomain.h>
 
 #define MPC8XXX_GPIO_PINS	32
 
@@ -44,6 +45,27 @@  struct mpc8xxx_gpio_chip {
 	const void *of_dev_id_data;
 };
 
+static bool gpio_little_endian;
+static inline u32 gpio_in32(void __iomem *addr)
+{
+	u32 val;
+
+	if (gpio_little_endian)
+		val = ioread32(addr);
+	else
+		val = ioread32be(addr);
+
+	return val;
+}
+
+static inline void gpio_out32(u32 val, void __iomem *addr)
+{
+	if (gpio_little_endian)
+		iowrite32(val, addr);
+	else
+		iowrite32be(val, addr);
+}
+
 static inline u32 mpc8xxx_gpio2mask(unsigned int gpio)
 {
 	return 1u << (MPC8XXX_GPIO_PINS - 1 - gpio);
@@ -59,9 +81,17 @@  static void mpc8xxx_gpio_save_regs(struct of_mm_gpio_chip *mm)
 {
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
 
-	mpc8xxx_gc->data = in_be32(mm->regs + GPIO_DAT);
+	mpc8xxx_gc->data = gpio_in32(mm->regs + GPIO_DAT);
 }
 
+/* Generic set and clear bits accessor ports */
+#define bgpio_setbits32(_addr, _v) \
+		gpio_out32(gpio_in32(_addr) |  (_v), (_addr))
+#define bgpio_clrbits32(_addr, _v) \
+		gpio_out32(gpio_in32(_addr) & ~(_v), (_addr))
+#define bgpio_clrsetbits32(addr, clear, set) \
+		gpio_out32((gpio_in32(addr) & ~(clear)) | (set), (addr))
+
 /* Workaround GPIO 1 errata on MPC8572/MPC8536. The status of GPIOs
  * defined as output cannot be determined by reading GPDAT register,
  * so we use shadow data register instead. The status of input pins
@@ -74,9 +104,9 @@  static int mpc8572_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc = to_mpc8xxx_gpio_chip(mm);
 	u32 out_mask, out_shadow;
 
-	out_mask = in_be32(mm->regs + GPIO_DIR);
+	out_mask = gpio_in32(mm->regs + GPIO_DIR);
 
-	val = in_be32(mm->regs + GPIO_DAT) & ~out_mask;
+	val = gpio_in32(mm->regs + GPIO_DAT) & ~out_mask;
 	out_shadow = mpc8xxx_gc->data & out_mask;
 
 	return (val | out_shadow) & mpc8xxx_gpio2mask(gpio);
@@ -86,7 +116,7 @@  static int mpc8xxx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
 
-	return in_be32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
+	return gpio_in32(mm->regs + GPIO_DAT) & mpc8xxx_gpio2mask(gpio);
 }
 
 static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
@@ -102,7 +132,7 @@  static void mpc8xxx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 	else
 		mpc8xxx_gc->data &= ~mpc8xxx_gpio2mask(gpio);
 
-	out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
+	gpio_out32(mpc8xxx_gc->data, mm->regs + GPIO_DAT);
 
 	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 }
@@ -128,7 +158,7 @@  static void mpc8xxx_gpio_set_multiple(struct gpio_chip *gc,
 		}
 	}
 
-	out_be32(mm->regs + GPIO_DAT, mpc8xxx_gc->data);
+	gpio_out32(mpc8xxx_gc->data, mm->regs + GPIO_DAT);
 
 	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 }
@@ -141,7 +171,7 @@  static int mpc8xxx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 
 	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 
-	clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+	bgpio_clrbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
 
 	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 
@@ -158,7 +188,7 @@  static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val
 
 	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 
-	setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
+	bgpio_setbits32(mm->regs + GPIO_DIR, mpc8xxx_gpio2mask(gpio));
 
 	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 
@@ -201,7 +231,8 @@  static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc)
 	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
 	unsigned int mask;
 
-	mask = in_be32(mm->regs + GPIO_IER) & in_be32(mm->regs + GPIO_IMR);
+	mask = gpio_in32(mm->regs + GPIO_IER)
+		& gpio_in32(mm->regs + GPIO_IMR);
 	if (mask)
 		generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
 						     32 - ffs(mask)));
@@ -217,7 +248,8 @@  static void mpc8xxx_irq_unmask(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 
-	setbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+	bgpio_setbits32(mm->regs + GPIO_IMR,
+			mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 
 	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 }
@@ -230,7 +262,8 @@  static void mpc8xxx_irq_mask(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
 
-	clrbits32(mm->regs + GPIO_IMR, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+	bgpio_clrbits32(mm->regs + GPIO_IMR,
+			mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 
 	raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 }
@@ -240,7 +273,7 @@  static void mpc8xxx_irq_ack(struct irq_data *d)
 	struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_data_get_irq_chip_data(d);
 	struct of_mm_gpio_chip *mm = &mpc8xxx_gc->mm_gc;
 
-	out_be32(mm->regs + GPIO_IER, mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+	gpio_out32(mpc8xxx_gpio2mask(irqd_to_hwirq(d)), mm->regs + GPIO_IER);
 }
 
 static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
@@ -252,15 +285,15 @@  static int mpc8xxx_irq_set_type(struct irq_data *d, unsigned int flow_type)
 	switch (flow_type) {
 	case IRQ_TYPE_EDGE_FALLING:
 		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-		setbits32(mm->regs + GPIO_ICR,
-			  mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+		bgpio_setbits32(mm->regs + GPIO_ICR,
+				mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 		break;
 
 	case IRQ_TYPE_EDGE_BOTH:
 		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-		clrbits32(mm->regs + GPIO_ICR,
-			  mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
+		bgpio_clrbits32(mm->regs + GPIO_ICR,
+				mpc8xxx_gpio2mask(irqd_to_hwirq(d)));
 		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 		break;
 
@@ -292,20 +325,20 @@  static int mpc512x_irq_set_type(struct irq_data *d, unsigned int flow_type)
 	case IRQ_TYPE_EDGE_FALLING:
 	case IRQ_TYPE_LEVEL_LOW:
 		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-		clrsetbits_be32(reg, 3 << shift, 2 << shift);
+		bgpio_clrsetbits32(reg, 3 << shift, 2 << shift);
 		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 		break;
 
 	case IRQ_TYPE_EDGE_RISING:
 	case IRQ_TYPE_LEVEL_HIGH:
 		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-		clrsetbits_be32(reg, 3 << shift, 1 << shift);
+		bgpio_clrsetbits32(reg, 3 << shift, 1 << shift);
 		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 		break;
 
 	case IRQ_TYPE_EDGE_BOTH:
 		raw_spin_lock_irqsave(&mpc8xxx_gc->lock, flags);
-		clrbits32(reg, 3 << shift);
+		bgpio_clrbits32(reg, 3 << shift);
 		raw_spin_unlock_irqrestore(&mpc8xxx_gc->lock, flags);
 		break;
 
@@ -398,6 +431,14 @@  static int mpc8xxx_probe(struct platform_device *pdev)
 	mm_gc = &mpc8xxx_gc->mm_gc;
 	gc = &mm_gc->gc;
 
+	if (of_property_read_bool(np, "little-endian")) {
+		gpio_little_endian = true;
+		dev_dbg(&pdev->dev, "GPIO REGISTERS are LITTLE endian\n");
+	} else {
+		gpio_little_endian = false;
+		dev_dbg(&pdev->dev, "GPIO REGISTERS are BIG endian\n");
+	}
+
 	mm_gc->save_regs = mpc8xxx_gpio_save_regs;
 	gc->ngpio = MPC8XXX_GPIO_PINS;
 	gc->direction_input = mpc8xxx_gpio_dir_in;
@@ -422,7 +463,7 @@  static int mpc8xxx_probe(struct platform_device *pdev)
 		return ret;
 
 	mpc8xxx_gc->irqn = irq_of_parse_and_map(np, 0);
-	if (mpc8xxx_gc->irqn == NO_IRQ)
+	if (mpc8xxx_gc->irqn == 0)
 		return 0;
 
 	mpc8xxx_gc->irq = irq_domain_add_linear(np, MPC8XXX_GPIO_PINS,
@@ -435,8 +476,8 @@  static int mpc8xxx_probe(struct platform_device *pdev)
 		mpc8xxx_gc->of_dev_id_data = id->data;
 
 	/* ack and mask all irqs */
-	out_be32(mm_gc->regs + GPIO_IER, 0xffffffff);
-	out_be32(mm_gc->regs + GPIO_IMR, 0);
+	gpio_out32(0xffffffff, mm_gc->regs + GPIO_IER);
+	gpio_out32(0, mm_gc->regs + GPIO_IMR);
 
 	irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
 					 mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);