[v7] PCI: Xilinx-NWL-PCIe: Added support for Xilinx NWL PCIe Host Controller

Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
---
Removed msi_controller and added irq_domian for MSI domain hierarchy.
Modified code for filling MSI address in struct msg.
Added check for hwirq before passing it to irq_domain_set_info.
---
 .../devicetree/bindings/pci/xilinx-nwl-pcie.txt    |   68 ++
 drivers/pci/host/Kconfig                           |   10 +
 drivers/pci/host/Makefile                          |    1 +
 drivers/pci/host/pcie-xilinx-nwl.c                 | 1053 ++++++++++++++++++++
 4 files changed, 1132 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
 create mode 100644 drivers/pci/host/pcie-xilinx-nwl.c

On 03/11/15 15:23, Bharat Kumar Gogada wrote:
> Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
> 
> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> ---
> Removed msi_controller and added irq_domian for MSI domain hierarchy.
> Modified code for filling MSI address in struct msg.
> Added check for hwirq before passing it to irq_domain_set_info.
> ---
>  .../devicetree/bindings/pci/xilinx-nwl-pcie.txt    |   68 ++
>  drivers/pci/host/Kconfig                           |   10 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pcie-xilinx-nwl.c                 | 1053 ++++++++++++++++++++
>  4 files changed, 1132 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>  create mode 100644 drivers/pci/host/pcie-xilinx-nwl.c

[...]

> +#ifdef CONFIG_PCI_MSI
> +static struct irq_chip nwl_msi_irq_chip = {
> +	.name = "nwl_pcie:msi",
> +	.irq_enable = unmask_msi_irq,
> +	.irq_disable = mask_msi_irq,
> +	.irq_mask = mask_msi_irq,
> +	.irq_unmask = unmask_msi_irq,
> +
> +};
> +
> +static struct msi_domain_info nwl_msi_domain_info = {
> +	.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> +		  MSI_FLAG_MULTI_PCI_MSI),

If you're supporting multi-MSI, how do you ensure that all hwirqs are
contiguous as required by the spec? Clearly, your allocator doesn't
provide this guarantee.

Also, you still lack support for MSI-X (which would come for free...).

> +	.chip = &nwl_msi_irq_chip,
> +};
> +#endif
> +
> +static void nwl_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> +	struct nwl_pcie *pcie = irq_data_get_irq_chip_data(data);
> +	struct nwl_msi *msi = &pcie->msi;
> +	phys_addr_t msi_addr = virt_to_phys((void *)msi->pages);
> +
> +	msg->address_lo = lower_32_bits(msi_addr);
> +	msg->address_hi = upper_32_bits(msi_addr);
> +	msg->data = data->hwirq;
> +}
> +
> +static int nwl_msi_set_affinity(struct irq_data *irq_data,
> +				const struct cpumask *mask, bool force)
> +{
> +	return -EINVAL;
> +}
> +
> +static struct irq_chip nwl_irq_chip = {
> +	.name = "Xilinx MSI",
> +	.irq_compose_msi_msg = nwl_compose_msi_msg,
> +	.irq_set_affinity = nwl_msi_set_affinity,
> +};
> +
> +static int nwl_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> +				unsigned int nr_irqs, void *args)
> +{
> +	struct nwl_pcie *pcie = domain->host_data;
> +	struct nwl_msi *msi = &pcie->msi;
> +	unsigned long bit;
> +
> +	mutex_lock(&msi->lock);
> +	bit = find_first_zero_bit(msi->used, INT_PCI_MSI_NR);
> +	if (bit < INT_PCI_MSI_NR)
> +		set_bit(bit, msi->used);
> +	else
> +		bit = -ENOSPC;
> +
> +	mutex_unlock(&msi->lock);
> +
> +	if (bit < 0)
> +		return bit;
> +
> +	irq_domain_set_info(domain, virq, bit, &nwl_irq_chip,
> +			domain->host_data, handle_simple_irq,
> +			NULL, NULL);
> +	return 0;
> +}
> +
> +static void nwl_irq_domain_free(struct irq_domain *domain, unsigned int virq,
> +					unsigned int nr_irqs)
> +{
> +	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
> +	struct nwl_pcie *pcie = irq_data_get_irq_chip_data(data);
> +	struct nwl_msi *msi = &pcie->msi;
> +
> +	mutex_lock(&msi->lock);
> +	if (!test_bit(data->hwirq, msi->used))
> +		dev_err(pcie->dev, "freeing unused MSI %lu\n", data->hwirq);
> +	else
> +		clear_bit(data->hwirq, msi->used);
> +
> +	mutex_unlock(&msi->lock);
> +}
> +
> +static const struct irq_domain_ops dev_msi_domain_ops = {
> +	.alloc  = nwl_irq_domain_alloc,
> +	.free   = nwl_irq_domain_free,
> +};
> +
> +static void nwl_pcie_free_irq_domain(struct nwl_pcie *pcie)
> +{
> +	int i;
> +	u32 irq;
> +
> +#ifdef CONFIG_PCI_MSI
> +	struct nwl_msi *msi = &pcie->msi;
> +#endif
> +
> +	for (i = 0; i < 4; i++) {
> +		irq = irq_find_mapping(pcie->legacy_irq_domain, i + 1);
> +		if (irq > 0)
> +			irq_dispose_mapping(irq);
> +	}
> +
> +	irq_domain_remove(pcie->legacy_irq_domain);
> +
> +#ifdef CONFIG_PCI_MSI
> +	irq_set_chained_handler_and_data(msi->irq_msi0, NULL, NULL);
> +	irq_set_chained_handler_and_data(msi->irq_msi1, NULL, NULL);
> +
> +	irq_domain_remove(msi->msi_domain);
> +	irq_domain_remove(msi->dev_domain);
> +#endif
> +
> +}

Remove these #ifdefs. You can test the validity of these fields before
calling the various functions. You can also move this to a separate
function.

> +
> +static int nwl_pcie_init_irq_domain(struct nwl_pcie *pcie)
> +{
> +	struct device_node *node = pcie->dev->of_node;
> +	struct device_node *legacy_intc_node;
> +
> +#ifdef CONFIG_PCI_MSI
> +	struct nwl_msi *msi = &pcie->msi;
> +#endif
> +
> +	legacy_intc_node = of_get_next_child(node, NULL);
> +	if (!legacy_intc_node) {
> +		dev_err(pcie->dev, "No legacy intc node found\n");
> +		return PTR_ERR(legacy_intc_node);
> +	}
> +
> +	pcie->legacy_irq_domain = irq_domain_add_linear(legacy_intc_node, 4,
> +							&legacy_domain_ops,
> +							pcie);
> +
> +	if (!pcie->legacy_irq_domain) {
> +		dev_err(pcie->dev, "failed to create IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +
> +#ifdef CONFIG_PCI_MSI
> +	msi->dev_domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> +					&dev_msi_domain_ops, pcie);
> +	if (!msi->dev_domain) {
> +		dev_err(pcie->dev, "failed to create dev IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +	msi->msi_domain = pci_msi_create_irq_domain(node,
> +							&nwl_msi_domain_info,
> +							msi->dev_domain);
> +	if (!msi->msi_domain) {
> +		dev_err(pcie->dev, "failed to create msi IRQ domain\n");
> +		irq_domain_remove(msi->dev_domain);
> +		return -ENOMEM;
> +	}
> +#endif

Similar treatment here: move anything that's MSI-dependent to another
function, and provide a dummy implementation for the !PCI_MSI case.

> +	return 0;
> +}
> +
> +static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus *bus)
> +{
> +	struct platform_device *pdev = to_platform_device(pcie->dev);
> +	struct nwl_msi *msi = &pcie->msi;
> +	unsigned long base;
> +	int ret;
> +
> +	mutex_init(&msi->lock);
> +
> +	/* Check for msii_present bit */
> +	ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
> +	if (!ret) {
> +		dev_err(pcie->dev, "MSI not present\n");
> +		ret = -EIO;
> +		goto err;
> +	}
> +
> +	/* Enable MSII */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> +			  MSII_ENABLE, I_MSII_CONTROL);
> +
> +	/* Enable MSII status */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> +			  MSII_STATUS_ENABLE, I_MSII_CONTROL);
> +
> +	/* setup AFI/FPCI range */
> +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
> +	base = virt_to_phys((void *)msi->pages);
> +	nwl_bridge_writel(pcie, lower_32_bits(base), I_MSII_BASE_LO);
> +	nwl_bridge_writel(pcie, upper_32_bits(base), I_MSII_BASE_HI);

I just read this, and I'm puzzled. Actually, puzzled is an
understatement. Why on Earth do you need to give RAM to your MSI HW?
This should be a device, not RAM. By the look of it, this could be
absolutely anything. Are you sure you have to supply RAM here?

> +
> +	/* Disable high range msi interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
> +
> +	/* Clear pending high range msi interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,  MSGF_MSI_STATUS_HI) &
> +			  MSGF_MSI_SR_HI_MASK, MSGF_MSI_STATUS_HI);
> +	/* Get msi_1 IRQ number */
> +	msi->irq_msi1 = platform_get_irq_byname(pdev, "msi1");
> +	if (msi->irq_msi1 < 0) {
> +		dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi1);
> +		goto err;
> +	}
> +	/* Register msi handler */
> +	irq_set_chained_handler_and_data(msi->irq_msi1,
> +					 nwl_pcie_msi_handler_high, pcie);
> +
> +	/* Enable all high range msi interrupts */
> +	nwl_bridge_writel(pcie, MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
> +
> +	/* Disable low range msi interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
> +
> +	/* Clear pending low range msi interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO) &
> +			  MSGF_MSI_SR_LO_MASK, MSGF_MSI_STATUS_LO);
> +	/* Get msi_0 IRQ number */
> +	msi->irq_msi0 = platform_get_irq_byname(pdev, "msi0");
> +	if (msi->irq_msi0 < 0) {
> +		dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi0);
> +		goto err;
> +	}
> +
> +	/* Register msi handler */
> +	irq_set_chained_handler_and_data(msi->irq_msi0,
> +					 nwl_pcie_msi_handler_low, pcie);
> +
> +	/* Enable all low range msi interrupts */
> +	nwl_bridge_writel(pcie, MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
> +
> +	return 0;
> +err:
> +	return ret;
> +}
> +
> +static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
> +{
> +	struct platform_device *pdev = to_platform_device(pcie->dev);
> +	u32 breg_val, ecam_val, first_busno = 0;
> +	int err;
> +	int check_link_up = 0;
> +
> +	/* Check for BREG present bit */
> +	breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
> +	if (!breg_val) {
> +		dev_err(pcie->dev, "BREG is not present\n");
> +		return breg_val;
> +	}
> +	/* Write bridge_off to breg base */
> +	nwl_bridge_writel(pcie, (u32)(pcie->phys_breg_base),
> +			  E_BREG_BASE_LO);
> +
> +	/* Enable BREG */
> +	nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
> +			  E_BREG_CONTROL);
> +
> +	/* Disable DMA channel registers */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
> +			  CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
> +
> +	/* Enable the bridge config interrupt */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
> +			  BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
> +	/* Enable Ingress subtractive decode translation */
> +	nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
> +
> +	/* Enable msg filtering details */
> +	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> +			  BRCFG_PCIE_RX_MSG_FILTER);
> +	do {
> +		err = nwl_pcie_link_up(pcie, PHY_RDY_LINKUP);
> +		if (err != 1) {
> +			check_link_up++;
> +			if (check_link_up > LINKUP_ITER_CHECK)
> +				return -ENODEV;
> +			mdelay(1000);
> +		}
> +	} while (!err);
> +
> +	/* Check for ECAM present bit */
> +	ecam_val = nwl_bridge_readl(pcie, E_ECAM_CAPABILITIES) & E_ECAM_PRESENT;
> +	if (!ecam_val) {
> +		dev_err(pcie->dev, "ECAM is not present\n");
> +		return ecam_val;
> +	}
> +
> +	/* Enable ECAM */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> +			  E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
> +	/* Write ecam_value on ecam_control */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> +			  (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
> +			  E_ECAM_CONTROL);
> +	/* Write phy_reg_base to ecam base */
> +	nwl_bridge_writel(pcie, (u32)pcie->phys_ecam_base, E_ECAM_BASE_LO);
> +
> +	/* Get bus range */
> +	ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
> +	pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
> +	/* Write primary, secondary and subordinate bus numbers */
> +	ecam_val = first_busno;
> +	ecam_val |= (first_busno + 1) << 8;
> +	ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
> +	writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
> +
> +	/* Check if PCIe link is up? */
> +	pcie->link_up = nwl_pcie_link_up(pcie, PCIE_USER_LINKUP);
> +	if (!pcie->link_up)
> +		dev_info(pcie->dev, "Link is DOWN\n");
> +	else
> +		dev_info(pcie->dev, "Link is UP\n");
> +
> +	/* Disable all misc interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> +	/* Clear pending misc interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
> +			  MSGF_MISC_SR_MASKALL, MSGF_MISC_STATUS);
> +
> +	/* Get misc IRQ number */
> +	pcie->irq_misc = platform_get_irq_byname(pdev, "misc");
> +	if (pcie->irq_misc < 0) {
> +		dev_err(&pdev->dev, "failed to get misc IRQ#%d\n",

That's going to be a pretty funky interrupt number.

> +			pcie->irq_misc);
> +		return pcie->irq_misc;

Don't you need to turn the thing down when you abort the probing?

> +	}
> +	/* Register misc handler */
> +	err = devm_request_irq(pcie->dev, pcie->irq_misc,
> +			       nwl_pcie_misc_handler, IRQF_SHARED,
> +			       "nwl_pcie:misc", pcie);
> +	if (err) {
> +		dev_err(pcie->dev, "fail to register misc IRQ#%d\n",
> +			pcie->irq_misc);
> +		return err;
> +	}
> +	/* Enable all misc interrupts */
> +	nwl_bridge_writel(pcie, MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> +	/* Disable all legacy interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> +	/* Clear pending legacy interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> +			  MSGF_LEG_SR_MASKALL, MSGF_LEG_STATUS);
> +	/* Get intx IRQ number */
> +	pcie->irq_intx = platform_get_irq_byname(pdev, "intx");
> +	if (pcie->irq_intx < 0) {
> +		dev_err(&pdev->dev, "failed to get intx IRQ#%d\n",

Same here.

> +			pcie->irq_intx);
> +		return pcie->irq_intx;
> +	}
> +
> +	/* Enable all legacy interrupts */
> +	nwl_bridge_writel(pcie, MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> +	return 0;
> +}

Thanks,

	M.

> > +static struct msi_domain_info nwl_msi_domain_info = {
> > +	.flags = (MSI_FLAG_USE_DEF_DOM_OPS |
> MSI_FLAG_USE_DEF_CHIP_OPS |
> > +		  MSI_FLAG_MULTI_PCI_MSI),
> 
> If you're supporting multi-MSI, how do you ensure that all hwirqs are
> contiguous as required by the spec? Clearly, your allocator doesn't provide
> this guarantee.
> 
Oh ok, then how can we know if one EP is requesting for multiple irq's, because in pci_enable_msi_range,
 it does do while loop according to msi_capability_init return value 
which in turn requests for multiple irq's. Is there any way to find out when single EP requesting for multiple MSI?

> Also, you still lack support for MSI-X (which would come for free...).

We don't support MSI-X in root port mode.
> 
> > +	.chip = &nwl_msi_irq_chip,
> > +};
> > +#endif
> > +
> > +	irq_domain_remove(pcie->legacy_irq_domain);
> > +
> > +#ifdef CONFIG_PCI_MSI
> > +	irq_set_chained_handler_and_data(msi->irq_msi0, NULL, NULL);
> > +	irq_set_chained_handler_and_data(msi->irq_msi1, NULL, NULL);
> > +
> > +	irq_domain_remove(msi->msi_domain);
> > +	irq_domain_remove(msi->dev_domain);
> > +#endif
> > +
> > +}
> 
> Remove these #ifdefs. You can test the validity of these fields before calling
> the various functions. You can also move this to a separate function.

Without #ifdefs if we compile driver for legacy, MSI structures will not be available and we get compile time error.
> 
> > +
> > +	/* setup AFI/FPCI range */
> > +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
> > +	base = virt_to_phys((void *)msi->pages);
> > +	nwl_bridge_writel(pcie, lower_32_bits(base), I_MSII_BASE_LO);
> > +	nwl_bridge_writel(pcie, upper_32_bits(base), I_MSII_BASE_HI);
> 
> I just read this, and I'm puzzled. Actually, puzzled is an understatement. Why
> on Earth do you need to give RAM to your MSI HW?
> This should be a device, not RAM. By the look of it, this could be absolutely
> anything. Are you sure you have to supply RAM here?
> 
This is required in our hardware, so that bridge identifies incoming MWr as MSI.
> > +
> > +	/* Disable high range msi interrupts */
> > +	nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_HI_MASK,
> > +MSGF_MSI_MASK_HI);
> > +
> > +

Bharat
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

> Without #ifdefs if we compile driver for legacy, MSI structures will not be available and we get compile time error.

Sorry for nitpicking but at least can we use elegant version of
#ifdefs .i.e. #if IS_ENABLED() here ?

Thanks,
Amit.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

> > Without #ifdefs if we compile driver for legacy, MSI structures will not be

> available and we get compile time error.

> 

> Sorry for nitpicking but at least can we use elegant version of #ifdefs .i.e. #if

> IS_ENABLED() here ?

> 

Since IS_ENABLED() is checked at runtime, compile time error would come for legacy.

Thanks
Bharat

On 04/11/15 06:38, Bharat Kumar Gogada wrote:
>>> +static struct msi_domain_info nwl_msi_domain_info = {
>>> +	.flags = (MSI_FLAG_USE_DEF_DOM_OPS |
>> MSI_FLAG_USE_DEF_CHIP_OPS |
>>> +		  MSI_FLAG_MULTI_PCI_MSI),
>>
>> If you're supporting multi-MSI, how do you ensure that all hwirqs are
>> contiguous as required by the spec? Clearly, your allocator doesn't provide
>> this guarantee.
>>
> Oh ok, then how can we know if one EP is requesting for multiple irq's, because in pci_enable_msi_range,
>  it does do while loop according to msi_capability_init return value 
> which in turn requests for multiple irq's. Is there any way to find out when single EP requesting for multiple MSI?

Please read what I've written: hwirqs *must* be contiguous for
multi-MSI. If the device requests 4 MSIs, they *must* be in the [x,x+3]
range. Your allocator only allocates one interrupt at time (ignoring the
nr_irqs parameter).

You shouldn't try to find what the device does, that's irrelevant at
that level.

>> Also, you still lack support for MSI-X (which would come for free...).
> 
> We don't support MSI-X in root port mode.

I don't believe you. If you support single MSI, you support MSI-X
(because that's mostly a property of the endpoint).

>>> +	.chip = &nwl_msi_irq_chip,
>>> +};
>>> +#endif
>>> +
>>> +	irq_domain_remove(pcie->legacy_irq_domain);
>>> +
>>> +#ifdef CONFIG_PCI_MSI
>>> +	irq_set_chained_handler_and_data(msi->irq_msi0, NULL, NULL);
>>> +	irq_set_chained_handler_and_data(msi->irq_msi1, NULL, NULL);
>>> +
>>> +	irq_domain_remove(msi->msi_domain);
>>> +	irq_domain_remove(msi->dev_domain);
>>> +#endif
>>> +
>>> +}
>>
>> Remove these #ifdefs. You can test the validity of these fields before calling
>> the various functions. You can also move this to a separate function.
> 
> Without #ifdefs if we compile driver for legacy, MSI structures will not be available and we get compile time error.

Legacy? Legacy interrupts? The msi structure is still there, you've
embedded it in your pcie structure. Let me spell it out for you:

static void nwl_msi_free_domain(struct nwl_pcie *pcie)
{
	struct nwl_msi *msi = &pcie->msi;

	if (msi->irq_msi0)
		irq_set_chained_handler_and_data(msi->irq_msi0, NULL, NULL);
	if (msi->irq_msi1)
		irq_set_chained_handler_and_data(msi->irq_msi1, NULL, NULL);

	if (msi->msi_domain)
		irq_domain_remove(msi->msi_domain);
	if (msi->dev_domain)
		irq_domain_remove(msi->dev_domain);
}

static void nwl_pcie_free_irq_domain(struct nwl_pcie *pcie)
{
	int i;
	u32 irq;

	for (i = 0; i < 4; i++) {
		irq = irq_find_mapping(pcie->legacy_irq_domain, i + 1);
		if (irq > 0)
			irq_dispose_mapping(irq);
	}

	irq_domain_remove(pcie->legacy_irq_domain);

	nwl_msi_free_domain(pcie);
}

>>> +
>>> +	/* setup AFI/FPCI range */
>>> +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
>>> +	base = virt_to_phys((void *)msi->pages);
>>> +	nwl_bridge_writel(pcie, lower_32_bits(base), I_MSII_BASE_LO);
>>> +	nwl_bridge_writel(pcie, upper_32_bits(base), I_MSII_BASE_HI);
>>
>> I just read this, and I'm puzzled. Actually, puzzled is an understatement. Why
>> on Earth do you need to give RAM to your MSI HW?
>> This should be a device, not RAM. By the look of it, this could be absolutely
>> anything. Are you sure you have to supply RAM here?
>>
> This is required in our hardware, so that bridge identifies incoming MWr as MSI.

I'm asking why this has to be RAM. What is the actual requirement?

	M.

On 04/11/15 07:54, Bharat Kumar Gogada wrote:
>>> Without #ifdefs if we compile driver for legacy, MSI structures will not be
>> available and we get compile time error.
>>
>> Sorry for nitpicking but at least can we use elegant version of #ifdefs .i.e. #if
>> IS_ENABLED() here ?
>>
> Since IS_ENABLED() is checked at runtime, compile time error would come for legacy.

You're seriously misguided. IS_ENABLED() is specifically designed *not*
to be checked at runtime, but instead to use the compiler optimization
phase to get rid of code sections at compile time.

	M.

> 
> >> Also, you still lack support for MSI-X (which would come for free...).
> >
> > We don't support MSI-X in root port mode.
> 
> I don't believe you. If you support single MSI, you support MSI-X (because
> that's mostly a property of the endpoint).

In our architecture specification MSI-X is unsupported for Root Port.
> 
> >>> +	.chip = &nwl_msi_irq_chip,
> >>> +};
> >>> +#endif
> >>> +
> >>> +
> >>> +	/* setup AFI/FPCI range */
> >>> +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
> >>> +	base = virt_to_phys((void *)msi->pages);
> >>> +	nwl_bridge_writel(pcie, lower_32_bits(base), I_MSII_BASE_LO);
> >>> +	nwl_bridge_writel(pcie, upper_32_bits(base), I_MSII_BASE_HI);
> >>
> >> I just read this, and I'm puzzled. Actually, puzzled is an
> >> understatement. Why on Earth do you need to give RAM to your MSI
> HW?
> >> This should be a device, not RAM. By the look of it, this could be
> >> absolutely anything. Are you sure you have to supply RAM here?
> >>
> > This is required in our hardware, so that bridge identifies incoming MWr as
> MSI.
> 
> I'm asking why this has to be RAM. What is the actual requirement?

We are allocating RAM for MSI (which is expected) and assigning this address to msi->pages
this is what EP MSI capability will be programmed with.
For the bridge to detect an incoming MWr from EP as MSI, hardware needs to know MSI address
so the same address is programmed in the hardware register for comparison purpose.
It is the actual requirement from hardware.

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

On 04/11/15 12:30, Bharat Kumar Gogada wrote:
>>
>>>> Also, you still lack support for MSI-X (which would come for free...).
>>>
>>> We don't support MSI-X in root port mode.
>>
>> I don't believe you. If you support single MSI, you support MSI-X (because
>> that's mostly a property of the endpoint).
> 
> In our architecture specification MSI-X is unsupported for Root Port.

I still can't believe it, but in the end, that's your own problem.

>>>>> +	.chip = &nwl_msi_irq_chip,
>>>>> +};
>>>>> +#endif
>>>>> +
>>>>> +
>>>>> +	/* setup AFI/FPCI range */
>>>>> +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
>>>>> +	base = virt_to_phys((void *)msi->pages);
>>>>> +	nwl_bridge_writel(pcie, lower_32_bits(base), I_MSII_BASE_LO);
>>>>> +	nwl_bridge_writel(pcie, upper_32_bits(base), I_MSII_BASE_HI);
>>>>
>>>> I just read this, and I'm puzzled. Actually, puzzled is an
>>>> understatement. Why on Earth do you need to give RAM to your MSI
>> HW?
>>>> This should be a device, not RAM. By the look of it, this could be
>>>> absolutely anything. Are you sure you have to supply RAM here?
>>>>
>>> This is required in our hardware, so that bridge identifies incoming MWr as
>> MSI.
>>
>> I'm asking why this has to be RAM. What is the actual requirement?
> 
> We are allocating RAM for MSI (which is expected) and assigning this address to msi->pages
> this is what EP MSI capability will be programmed with.
> For the bridge to detect an incoming MWr from EP as MSI, hardware needs to know MSI address
> so the same address is programmed in the hardware register for comparison purpose.
> It is the actual requirement from hardware.

I understand that you need to provide an address for the bridge to
match. I'm asking why this has to be RAM as opposed to any other device
address. This seems to be a unique requirement (nobody else does that),
and I'd like to understand why there is this requirement.

Thanks,

	M.

On Tue, Nov 03, 2015 at 08:53:47PM +0530, Bharat Kumar Gogada wrote:
> Adding PCIe Root Port driver for Xilinx PCIe NWL bridge IP.
> 
> Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
> Signed-off-by: Ravi Kiran Gummaluri <rgummal@xilinx.com>
> ---
> Removed msi_controller and added irq_domian for MSI domain hierarchy.
> Modified code for filling MSI address in struct msg.
> Added check for hwirq before passing it to irq_domain_set_info.
> ---
>  .../devicetree/bindings/pci/xilinx-nwl-pcie.txt    |   68 ++

Acked-by: Rob Herring <robh@kernel.org>

>  drivers/pci/host/Kconfig                           |   10 +
>  drivers/pci/host/Makefile                          |    1 +
>  drivers/pci/host/pcie-xilinx-nwl.c                 | 1053 ++++++++++++++++++++
>  4 files changed, 1132 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
>  create mode 100644 drivers/pci/host/pcie-xilinx-nwl.c
> 
> diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> new file mode 100644
> index 0000000..3b2a9ad
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
> @@ -0,0 +1,68 @@
> +* Xilinx NWL PCIe Root Port Bridge DT description
> +
> +Required properties:
> +- compatible: Should contain "xlnx,nwl-pcie-2.11"
> +- #address-cells: Address representation for root ports, set to <3>
> +- #size-cells: Size representation for root ports, set to <2>
> +- #interrupt-cells: specifies the number of cells needed to encode an
> +	interrupt source. The value must be 1.
> +- reg: Should contain Bridge, PCIe Controller registers location,
> +	configuration sapce, and length
> +- reg-names: Must include the following entries:
> +	"breg": bridge registers
> +	"pcireg": PCIe controller registers
> +	"cfg": configuration space region
> +- device_type: must be "pci"
> +- interrupts: Should contain NWL PCIe interrupt
> +- interrupt-names: Must include the following entries:
> +	"msi1, msi0": interrupt asserted when msi is received
> +	"intx": interrupt that is asserted when an legacy interrupt is received
> +	"misc": interrupt asserted when miscellaneous is received
> +- interrupt-map-mask and interrupt-map: standard PCI properties to define the
> +	mapping of the PCI interface to interrupt numbers.
> +- ranges: ranges for the PCI memory regions (I/O space region is not
> +	supported by hardware)
> +	Please refer to the standard PCI bus binding document for a more
> +	detailed explanation
> +- msi-controller: indicates that this is MSI controller node
> +- msi-parent:  MSI parent of the root complex itself
> +- legacy-interrupt-controller: Interrupt controller device node for Legacy interrupts
> +	- interrupt-controller: identifies the node as an interrupt controller
> +	- #interrupt-cells: should be set to 1
> +	- #address-cells: specifies the number of cells needed to encode an
> +		address. The value must be 0.
> +
> +
> +Example:
> +++++++++
> +
> +nwl_pcie: pcie@fd0e0000 {
> +	#address-cells = <3>;
> +	#size-cells = <2>;
> +	compatible = "xlnx,nwl-pcie-2.11";
> +	#interrupt-cells = <1>;
> +	msi-controller;
> +	device_type = "pci";
> +	interrupt-parent = <&gic>;
> +	interrupts = <0 114 4>, <0 115 4>, <0 116 4>, <0 117 4>, <0 118 4>;
> +	interrupt-names = "msi0", "msi1", "intx", "dummy", "misc";
> +	interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +	interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc 0x1>,
> +			<0x0 0x0 0x0 0x2 &pcie_intc 0x2>,
> +			<0x0 0x0 0x0 0x3 &pcie_intc 0x3>,
> +			<0x0 0x0 0x0 0x4 &pcie_intc 0x4>;
> +
> +	msi-parent = <&nwl_pcie>;
> +	reg = <0x0 0xfd0e0000 0x1000>,
> +	      <0x0 0xfd480000 0x1000>,
> +	      <0x0 0xe0000000 0x1000000>;
> +	reg-names = "breg", "pcireg", "cfg";
> +	ranges = <0x02000000 0x00000000 0xe1000000 0x00000000 0xe1000000 0 0x0f000000>;
> +
> +	pcie_intc: legacy-interrupt-controller {
> +		interrupt-controller;
> +		#address-cells = <0>;
> +		#interrupt-cells = <1>;
> +	};
> +
> +};
> diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
> index d5e58ba..24cbcba 100644
> --- a/drivers/pci/host/Kconfig
> +++ b/drivers/pci/host/Kconfig
> @@ -15,6 +15,16 @@ config PCI_MVEBU
>  	depends on ARCH_MVEBU || ARCH_DOVE
>  	depends on OF
>  
> +config PCIE_XILINX_NWL
> +	bool "NWL PCIe Core"
> +	depends on ARCH_ZYNQMP
> +	select PCI_MSI_IRQ_DOMAIN if PCI_MSI
> +	help
> +	 Say 'Y' here if you want kernel to support for Xilinx
> +	 NWL PCIe controller. The controller can act as Root Port
> +	 or End Point. The current option selection will only
> +	 support root port enabling.
> +
>  config PCIE_DW
>  	bool
>  
> diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile
> index 140d66f..6a56df7 100644
> --- a/drivers/pci/host/Makefile
> +++ b/drivers/pci/host/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
>  obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
>  obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone-dw.o pci-keystone.o
>  obj-$(CONFIG_PCIE_XILINX) += pcie-xilinx.o
> +obj-$(CONFIG_PCIE_XILINX_NWL) += pcie-xilinx-nwl.o
>  obj-$(CONFIG_PCI_XGENE) += pci-xgene.o
>  obj-$(CONFIG_PCI_XGENE_MSI) += pci-xgene-msi.o
>  obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> diff --git a/drivers/pci/host/pcie-xilinx-nwl.c b/drivers/pci/host/pcie-xilinx-nwl.c
> new file mode 100644
> index 0000000..532f479
> --- /dev/null
> +++ b/drivers/pci/host/pcie-xilinx-nwl.c
> @@ -0,0 +1,1053 @@
> +/*
> + * PCIe host controller driver for NWL PCIe Bridge
> + * Based on pcie-xilinx.c, pci-tegra.c
> + *
> + * (C) Copyright 2014 - 2015, Xilinx, Inc.
> + *
> + * This program is free software: you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation, either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/msi.h>
> +#include <linux/of_address.h>
> +#include <linux/of_pci.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/irqchip/chained_irq.h>
> +
> +/* Bridge core config registers */
> +#define BRCFG_PCIE_RX0			0x00000000
> +#define BRCFG_PCIE_RX1			0x00000004
> +#define BRCFG_AXI_MASTER		0x00000008
> +#define BRCFG_PCIE_TX			0x0000000C
> +#define BRCFG_INTERRUPT			0x00000010
> +#define BRCFG_RAM_DISABLE0		0x00000014
> +#define BRCFG_RAM_DISABLE1		0x00000018
> +#define BRCFG_PCIE_RELAXED_ORDER	0x0000001C
> +#define BRCFG_PCIE_RX_MSG_FILTER	0x00000020
> +
> +/* Attribute registers */
> +#define NWL_ATTRIB_100			0x00000190
> +
> +/* Egress - Bridge translation registers */
> +#define E_BREG_CAPABILITIES		0x00000200
> +#define E_BREG_STATUS			0x00000204
> +#define E_BREG_CONTROL			0x00000208
> +#define E_BREG_BASE_LO			0x00000210
> +#define E_BREG_BASE_HI			0x00000214
> +#define E_ECAM_CAPABILITIES		0x00000220
> +#define E_ECAM_STATUS			0x00000224
> +#define E_ECAM_CONTROL			0x00000228
> +#define E_ECAM_BASE_LO			0x00000230
> +#define E_ECAM_BASE_HI			0x00000234
> +
> +/* Ingress - address translations */
> +#define I_MSII_CAPABILITIES		0x00000300
> +#define I_MSII_CONTROL			0x00000308
> +#define I_MSII_BASE_LO			0x00000310
> +#define I_MSII_BASE_HI			0x00000314
> +
> +#define I_ISUB_CONTROL			0x000003E8
> +#define SET_ISUB_CONTROL		BIT(0)
> +/* Rxed msg fifo  - Interrupt status registers */
> +#define MSGF_MISC_STATUS		0x00000400
> +#define MSGF_MISC_MASK			0x00000404
> +#define MSGF_LEG_STATUS			0x00000420
> +#define MSGF_LEG_MASK			0x00000424
> +#define MSGF_MSI_STATUS_LO		0x00000440
> +#define MSGF_MSI_STATUS_HI		0x00000444
> +#define MSGF_MSI_MASK_LO		0x00000448
> +#define MSGF_MSI_MASK_HI		0x0000044C
> +#define MSGF_RX_FIFO_POP		0x00000484
> +#define MSGF_RX_FIFO_TYPE		0x00000488
> +#define MSGF_RX_FIFO_ADDRLO		0x00000490
> +#define MSGF_RX_FIFO_ADDRHI		0x00000494
> +#define MSGF_RX_FIFO_DATA		0x00000498
> +
> +/* Msg filter mask bits */
> +#define CFG_ENABLE_PM_MSG_FWD		BIT(1)
> +#define CFG_ENABLE_INT_MSG_FWD		BIT(2)
> +#define CFG_ENABLE_ERR_MSG_FWD		BIT(3)
> +#define CFG_ENABLE_SLT_MSG_FWD		BIT(5)
> +#define CFG_ENABLE_VEN_MSG_FWD		BIT(7)
> +#define CFG_ENABLE_OTH_MSG_FWD		BIT(13)
> +#define CFG_ENABLE_VEN_MSG_EN		BIT(14)
> +#define CFG_ENABLE_VEN_MSG_VEN_INV	BIT(15)
> +#define CFG_ENABLE_VEN_MSG_VEN_ID	GENMASK(31, 16)
> +#define CFG_ENABLE_MSG_FILTER_MASK	(CFG_ENABLE_PM_MSG_FWD | \
> +					CFG_ENABLE_INT_MSG_FWD | \
> +					CFG_ENABLE_ERR_MSG_FWD | \
> +					CFG_ENABLE_SLT_MSG_FWD | \
> +					CFG_ENABLE_VEN_MSG_FWD | \
> +					CFG_ENABLE_OTH_MSG_FWD | \
> +					CFG_ENABLE_VEN_MSG_EN | \
> +					CFG_ENABLE_VEN_MSG_VEN_INV | \
> +					CFG_ENABLE_VEN_MSG_VEN_ID)
> +
> +/* Misc interrupt status mask bits */
> +#define MSGF_MISC_SR_RXMSG_AVAIL	BIT(0)
> +#define MSGF_MISC_SR_RXMSG_OVER		BIT(1)
> +#define MSGF_MISC_SR_SLAVE_ERR		BIT(4)
> +#define MSGF_MISC_SR_MASTER_ERR		BIT(5)
> +#define MSGF_MISC_SR_I_ADDR_ERR		BIT(6)
> +#define MSGF_MISC_SR_E_ADDR_ERR		BIT(7)
> +
> +#define MSGF_MISC_SR_PCIE_CORE		GENMASK(18, 16)
> +#define MSGF_MISC_SR_PCIE_CORE_ERR	GENMASK(31, 20)
> +
> +#define MSGF_MISC_SR_MASKALL		(MSGF_MISC_SR_RXMSG_AVAIL | \
> +					MSGF_MISC_SR_RXMSG_OVER | \
> +					MSGF_MISC_SR_SLAVE_ERR | \
> +					MSGF_MISC_SR_MASTER_ERR | \
> +					MSGF_MISC_SR_I_ADDR_ERR | \
> +					MSGF_MISC_SR_E_ADDR_ERR | \
> +					MSGF_MISC_SR_PCIE_CORE | \
> +					MSGF_MISC_SR_PCIE_CORE_ERR)
> +
> +/* Message rx fifo type mask bits */
> +#define MSGF_RX_FIFO_TYPE_MSI	(1)
> +#define MSGF_RX_FIFO_TYPE_TYPE	GENMASK(1, 0)
> +
> +/* Legacy interrupt status mask bits */
> +#define MSGF_LEG_SR_INTA		BIT(0)
> +#define MSGF_LEG_SR_INTB		BIT(1)
> +#define MSGF_LEG_SR_INTC		BIT(2)
> +#define MSGF_LEG_SR_INTD		BIT(3)
> +#define MSGF_LEG_SR_MASKALL		(MSGF_LEG_SR_INTA | MSGF_LEG_SR_INTB | \
> +					MSGF_LEG_SR_INTC | MSGF_LEG_SR_INTD)
> +
> +/* MSI interrupt status mask bits */
> +#define MSGF_MSI_SR_LO_MASK		BIT(0)
> +#define MSGF_MSI_SR_HI_MASK		BIT(0)
> +
> +#define MSII_PRESENT			BIT(0)
> +#define MSII_ENABLE			BIT(0)
> +#define MSII_STATUS_ENABLE		BIT(15)
> +
> +/* Bridge config interrupt mask */
> +#define BRCFG_INTERRUPT_MASK		BIT(0)
> +#define BREG_PRESENT			BIT(0)
> +#define BREG_ENABLE			BIT(0)
> +#define BREG_ENABLE_FORCE		BIT(1)
> +
> +/* E_ECAM status mask bits */
> +#define E_ECAM_PRESENT			BIT(0)
> +#define E_ECAM_SR_WR_PEND		BIT(16)
> +#define E_ECAM_SR_RD_PEND		BIT(0)
> +#define E_ECAM_SR_MASKALL		(E_ECAM_SR_WR_PEND | E_ECAM_SR_RD_PEND)
> +#define E_ECAM_CR_ENABLE		BIT(0)
> +#define E_ECAM_SIZE_LOC			GENMASK(20, 16)
> +#define E_ECAM_SIZE_SHIFT		16
> +#define ECAM_BUS_LOC_SHIFT		20
> +#define ECAM_DEV_LOC_SHIFT		12
> +#define NWL_ECAM_VALUE_DEFAULT		12
> +#define NWL_ECAM_SIZE_MIN		4096
> +
> +#define ATTR_UPSTREAM_FACING		BIT(6)
> +#define CFG_DMA_REG_BAR			GENMASK(2, 0)
> +
> +/* msgf_rx_fifo_pop bits */
> +#define MSGF_RX_FIFO_POP_POP	BIT(0)
> +
> +#define INT_PCI_MSI_NR			(2 * 32)
> +
> +/* Readin the PS_LINKUP */
> +#define PS_LINKUP_OFFSET			0x00000238
> +#define PCIE_PHY_LINKUP_BIT			BIT(0)
> +#define PHY_RDY_LINKUP_BIT			BIT(1)
> +#define PCIE_USER_LINKUP			0
> +#define PHY_RDY_LINKUP				1
> +#define LINKUP_ITER_CHECK			5
> +
> +/* PCIE Message Request */
> +#define TX_PCIE_MSG				0x00000620
> +#define TX_PCIE_MSG_CNTL			0x00000004
> +#define TX_PCIE_MSG_SPEC_LO			0x00000008
> +#define TX_PCIE_MSG_SPEC_HI			0x0000000C
> +#define TX_PCIE_MSG_DATA			0x00000010
> +
> +#define MSG_BUSY_BIT				BIT(8)
> +#define MSG_EXECUTE_BIT				BIT(0)
> +#define MSG_DONE_BIT				BIT(16)
> +#define MSG_DONE_STATUS_BIT			(BIT(25) | BIT(24))
> +#define RANDOM_DIGIT				0x11223344
> +#define PATTRN_SSLP_TLP				0x01005074
> +
> +#define EXP_CAP_BASE				0x60
> +
> +/* SSPL ERROR */
> +#define SLVERR					0x02
> +#define DECERR					0x03
> +
> +struct nwl_msi {			/* MSI information */
> +	struct irq_domain *msi_domain;
> +	DECLARE_BITMAP(used, INT_PCI_MSI_NR);	/* Declare Bitmap for MSI */
> +	struct irq_domain *dev_domain;
> +	unsigned long pages;		/* MSI pages */
> +	struct mutex lock;		/* protect used variable */
> +	int irq_msi0;
> +	int irq_msi1;
> +};
> +
> +struct nwl_pcie {
> +	struct device *dev;
> +	void __iomem *breg_base;
> +	void __iomem *pcireg_base;
> +	void __iomem *ecam_base;
> +	u32 phys_breg_base;		/* Physical Bridge Register Base */
> +	u32 phys_pcie_reg_base;		/* Physical PCIe Controller Base */
> +	u32 phys_ecam_base;		/* Physical Configuration Base */
> +	u32 breg_size;
> +	u32 pcie_reg_size;
> +	u32 ecam_size;
> +	int irq_intx;
> +	int irq_misc;
> +	u32 ecam_value;
> +	u8 last_busno;
> +	u8 root_busno;
> +	u8 link_up;
> +	struct nwl_msi msi;
> +	struct irq_domain *legacy_irq_domain;
> +};
> +
> +static inline u32 nwl_bridge_readl(struct nwl_pcie *pcie, u32 off)
> +{
> +	return readl(pcie->breg_base + off);
> +}
> +
> +static inline void nwl_bridge_writel(struct nwl_pcie *pcie, u32 val, u32 off)
> +{
> +	writel(val, pcie->breg_base + off);
> +}
> +
> +static inline bool nwl_pcie_link_up(struct nwl_pcie *pcie, u32 check_link_up)
> +{
> +	unsigned int status = -EINVAL;
> +
> +	if (check_link_up == PCIE_USER_LINKUP)
> +		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
> +			  PCIE_PHY_LINKUP_BIT) ? 1 : 0;
> +	else if (check_link_up == PHY_RDY_LINKUP)
> +		status = (readl(pcie->pcireg_base + PS_LINKUP_OFFSET) &
> +			  PHY_RDY_LINKUP_BIT) ? 1 : 0;
> +	return status;
> +}
> +
> +static bool nwl_pcie_valid_device(struct pci_bus *bus, unsigned int devfn)
> +{
> +	struct nwl_pcie *pcie = bus->sysdata;
> +
> +	/* Check link,before accessing downstream ports */
> +	if (bus->number != pcie->root_busno) {
> +		if (!nwl_pcie_link_up(pcie, PCIE_USER_LINKUP))
> +			return false;
> +	}
> +
> +	/* Only one device down on each root port */
> +	if (bus->number == pcie->root_busno && devfn > 0)
> +		return false;
> +
> +	/*
> +	 * Do not read more than one device on the bus directly attached
> +	 * to root port.
> +	 */
> +	if (bus->primary == pcie->root_busno && devfn > 0)
> +		return false;
> +
> +	return true;
> +}
> +
> +/**
> + * nwl_pcie_get_config_base - Get configuration base
> + *
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + *
> + * Return: Base address of the configuration space needed to be
> + *	   accessed.
> + */
> +static void __iomem *nwl_pcie_get_config_base(struct pci_bus *bus,
> +						 unsigned int devfn,
> +						 int where)
> +{
> +	struct nwl_pcie *pcie = bus->sysdata;
> +	int relbus;
> +
> +	if (!nwl_pcie_valid_device(bus, devfn))
> +		return NULL;
> +
> +	relbus = (bus->number << ECAM_BUS_LOC_SHIFT) |
> +			(devfn << ECAM_DEV_LOC_SHIFT);
> +
> +	return pcie->ecam_base + relbus + where;
> +}
> +
> +/**
> + * nwl_setup_sspl - Set Slot Power limit
> + *
> + * @pcie: PCIe port information
> + */
> +static int nwl_setup_sspl(struct nwl_pcie *pcie)
> +{
> +	unsigned int status;
> +	int retval = 0;
> +
> +	do {
> +		status = nwl_bridge_readl(pcie, TX_PCIE_MSG) & MSG_BUSY_BIT;
> +		if (!status) {
> +			/*
> +			 * Generate the TLP message for a single EP
> +			 * [TODO] Add a multi-endpoint code
> +			 */
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_LO);
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_SPEC_HI);
> +			nwl_bridge_writel(pcie, 0x0,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> +			/* Pattern to generate SSLP TLP */
> +			nwl_bridge_writel(pcie, PATTRN_SSLP_TLP,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_CNTL);
> +			nwl_bridge_writel(pcie, RANDOM_DIGIT,
> +					  TX_PCIE_MSG + TX_PCIE_MSG_DATA);
> +			nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,
> +					  TX_PCIE_MSG) | 0x1, TX_PCIE_MSG);
> +			mdelay(2);
> +			status = nwl_bridge_readl(pcie, TX_PCIE_MSG)
> +						  & MSG_DONE_BIT;
> +			if (status) {
> +				status = nwl_bridge_readl(pcie, TX_PCIE_MSG)
> +						  & MSG_DONE_STATUS_BIT;
> +				if (status == SLVERR) {
> +					dev_err(pcie->dev, "AXI slave error");
> +					retval = SLVERR;
> +				} else if (status == DECERR) {
> +					dev_err(pcie->dev, "AXI Decode error");
> +					retval = DECERR;
> +				}
> +			} else {
> +				retval = 1;
> +			}
> +		}
> +	} while (status);
> +
> +	return retval;
> +}
> +
> +/**
> + * nwl_nwl_readl_config - Read configuration space
> + *
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + * @size: Byte/word/dword
> + * @val: Value to be read
> + *
> + * Return: PCIBIOS_SUCCESSFUL on success
> + *	   PCIBIOS_DEVICE_NOT_FOUND on failure.
> + */
> +static int nwl_nwl_readl_config(struct pci_bus *bus,
> +				unsigned int devfn,
> +				int where,
> +				int size,
> +				u32 *val)
> +{
> +	void __iomem *addr;
> +
> +	addr = nwl_pcie_get_config_base(bus, devfn, where);
> +	if (!addr) {
> +		*val = ~0;
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +	}
> +
> +	switch (size) {
> +	case 1:
> +		*val = readb(addr);
> +		break;
> +	case 2:
> +		*val = readw(addr);
> +		break;
> +	default:
> +		*val = readl(addr);
> +		break;
> +	}
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/**
> + * nwl_nwl_writel_config - Write configuration space
> + *
> + * @bus: Bus structure of current bus
> + * @devfn: Device/function
> + * @where: Offset from base
> + * @size: Byte/word/dword
> + * @val: Value to be written to device
> + *
> + * Return: PCIBIOS_SUCCESSFUL on success,
> + *	   PCIBIOS_DEVICE_NOT_FOUND on failure.
> + */
> +static int nwl_nwl_writel_config(struct pci_bus *bus,
> +				unsigned int devfn,
> +				int where,
> +				int size,
> +				u32 val)
> +{
> +	void __iomem *addr;
> +	int retval;
> +	struct nwl_pcie *pcie = bus->sysdata;
> +
> +	addr = nwl_pcie_get_config_base(bus, devfn, where);
> +	if (!addr)
> +		return PCIBIOS_DEVICE_NOT_FOUND;
> +
> +	switch (size) {
> +	case 1:
> +		writeb(val, addr);
> +		break;
> +	case 2:
> +		writew(val, addr);
> +		break;
> +	default:
> +		writel(val, addr);
> +		break;
> +	}
> +	if (addr == (pcie->ecam_base + EXP_CAP_BASE + PCI_EXP_SLTCAP)) {
> +		retval = nwl_setup_sspl(pcie);
> +		if (retval)
> +			return PCIBIOS_SET_FAILED;
> +	}
> +
> +	return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/* PCIe operations */
> +static struct pci_ops nwl_pcie_ops = {
> +	.read  = nwl_nwl_readl_config,
> +	.write = nwl_nwl_writel_config,
> +};
> +
> +static irqreturn_t nwl_pcie_misc_handler(int irq, void *data)
> +{
> +	struct nwl_pcie *pcie = data;
> +	u32 misc_stat;
> +
> +	/* Checking for misc interrupts */
> +	misc_stat = nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
> +				     MSGF_MISC_SR_MASKALL;
> +	if (!misc_stat)
> +		return IRQ_NONE;
> +
> +	if (misc_stat & MSGF_MISC_SR_RXMSG_OVER)
> +		dev_err(pcie->dev, "Received Message FIFO Overflow\n");
> +
> +	if (misc_stat & MSGF_MISC_SR_SLAVE_ERR)
> +		dev_err(pcie->dev, "Slave error\n");
> +
> +	if (misc_stat & MSGF_MISC_SR_MASTER_ERR)
> +		dev_err(pcie->dev, "Master error\n");
> +
> +	if (misc_stat & MSGF_MISC_SR_I_ADDR_ERR)
> +		dev_err(pcie->dev,
> +			"In Misc Ingress address translation error\n");
> +
> +	if (misc_stat & MSGF_MISC_SR_E_ADDR_ERR)
> +		dev_err(pcie->dev,
> +			"In Misc Egress address translation error\n");
> +
> +	if (misc_stat & MSGF_MISC_SR_PCIE_CORE_ERR)
> +		dev_err(pcie->dev, "PCIe Core error\n");
> +
> +	/* Clear misc interrupt status */
> +	nwl_bridge_writel(pcie, misc_stat, MSGF_MISC_STATUS);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void nwl_pcie_leg_handler(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	struct nwl_pcie *pcie;
> +	unsigned long status;
> +	u32 bit;
> +	u32 virq;
> +
> +	chained_irq_enter(chip, desc);
> +	pcie = irq_desc_get_handler_data(desc);
> +
> +	while ((status = nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> +				MSGF_LEG_SR_MASKALL) != 0) {
> +		for_each_set_bit(bit, &status, 4) {
> +
> +			virq = irq_find_mapping(pcie->legacy_irq_domain,
> +						bit + 1);
> +			if (virq)
> +				generic_handle_irq(virq);
> +		}
> +	}
> +
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static void nwl_pcie_handle_msi_irq(struct nwl_pcie *pcie, u32 status_reg)
> +{
> +	struct nwl_msi *msi;
> +	unsigned long status;
> +	u32 bit;
> +	u32 virq;
> +
> +	msi = &pcie->msi;
> +
> +	while ((status = nwl_bridge_readl(pcie, status_reg)) != 0) {
> +		for_each_set_bit(bit, &status, 32) {
> +			nwl_bridge_writel(pcie, 1 << bit, status_reg);
> +			virq = irq_find_mapping(msi->dev_domain, bit);
> +			if (virq)
> +				generic_handle_irq(virq);
> +		}
> +	}
> +}
> +
> +static void nwl_pcie_msi_handler_high(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	struct nwl_pcie *pcie;
> +
> +	chained_irq_enter(chip, desc);
> +	pcie = irq_desc_get_handler_data(desc);
> +	nwl_pcie_handle_msi_irq(pcie, MSGF_MSI_STATUS_HI);
> +
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static void nwl_pcie_msi_handler_low(struct irq_desc *desc)
> +{
> +	struct irq_chip *chip = irq_desc_get_chip(desc);
> +	struct nwl_pcie *pcie;
> +
> +	chained_irq_enter(chip, desc);
> +	pcie = irq_desc_get_handler_data(desc);
> +	nwl_pcie_handle_msi_irq(pcie, MSGF_MSI_STATUS_LO);
> +
> +	chained_irq_exit(chip, desc);
> +}
> +
> +static int nwl_legacy_map(struct irq_domain *domain, unsigned int irq,
> +				irq_hw_number_t hwirq)
> +{
> +	irq_set_chip_and_handler(irq, &dummy_irq_chip, handle_simple_irq);
> +	irq_set_chip_data(irq, domain->host_data);
> +
> +	return 0;
> +}
> +
> +static const struct irq_domain_ops legacy_domain_ops = {
> +	.map = nwl_legacy_map,
> +};
> +
> +#ifdef CONFIG_PCI_MSI
> +static struct irq_chip nwl_msi_irq_chip = {
> +	.name = "nwl_pcie:msi",
> +	.irq_enable = unmask_msi_irq,
> +	.irq_disable = mask_msi_irq,
> +	.irq_mask = mask_msi_irq,
> +	.irq_unmask = unmask_msi_irq,
> +
> +};
> +
> +static struct msi_domain_info nwl_msi_domain_info = {
> +	.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> +		  MSI_FLAG_MULTI_PCI_MSI),
> +	.chip = &nwl_msi_irq_chip,
> +};
> +#endif
> +
> +static void nwl_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
> +{
> +	struct nwl_pcie *pcie = irq_data_get_irq_chip_data(data);
> +	struct nwl_msi *msi = &pcie->msi;
> +	phys_addr_t msi_addr = virt_to_phys((void *)msi->pages);
> +
> +	msg->address_lo = lower_32_bits(msi_addr);
> +	msg->address_hi = upper_32_bits(msi_addr);
> +	msg->data = data->hwirq;
> +}
> +
> +static int nwl_msi_set_affinity(struct irq_data *irq_data,
> +				const struct cpumask *mask, bool force)
> +{
> +	return -EINVAL;
> +}
> +
> +static struct irq_chip nwl_irq_chip = {
> +	.name = "Xilinx MSI",
> +	.irq_compose_msi_msg = nwl_compose_msi_msg,
> +	.irq_set_affinity = nwl_msi_set_affinity,
> +};
> +
> +static int nwl_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> +				unsigned int nr_irqs, void *args)
> +{
> +	struct nwl_pcie *pcie = domain->host_data;
> +	struct nwl_msi *msi = &pcie->msi;
> +	unsigned long bit;
> +
> +	mutex_lock(&msi->lock);
> +	bit = find_first_zero_bit(msi->used, INT_PCI_MSI_NR);
> +	if (bit < INT_PCI_MSI_NR)
> +		set_bit(bit, msi->used);
> +	else
> +		bit = -ENOSPC;
> +
> +	mutex_unlock(&msi->lock);
> +
> +	if (bit < 0)
> +		return bit;
> +
> +	irq_domain_set_info(domain, virq, bit, &nwl_irq_chip,
> +			domain->host_data, handle_simple_irq,
> +			NULL, NULL);
> +	return 0;
> +}
> +
> +static void nwl_irq_domain_free(struct irq_domain *domain, unsigned int virq,
> +					unsigned int nr_irqs)
> +{
> +	struct irq_data *data = irq_domain_get_irq_data(domain, virq);
> +	struct nwl_pcie *pcie = irq_data_get_irq_chip_data(data);
> +	struct nwl_msi *msi = &pcie->msi;
> +
> +	mutex_lock(&msi->lock);
> +	if (!test_bit(data->hwirq, msi->used))
> +		dev_err(pcie->dev, "freeing unused MSI %lu\n", data->hwirq);
> +	else
> +		clear_bit(data->hwirq, msi->used);
> +
> +	mutex_unlock(&msi->lock);
> +}
> +
> +static const struct irq_domain_ops dev_msi_domain_ops = {
> +	.alloc  = nwl_irq_domain_alloc,
> +	.free   = nwl_irq_domain_free,
> +};
> +
> +static void nwl_pcie_free_irq_domain(struct nwl_pcie *pcie)
> +{
> +	int i;
> +	u32 irq;
> +
> +#ifdef CONFIG_PCI_MSI
> +	struct nwl_msi *msi = &pcie->msi;
> +#endif
> +
> +	for (i = 0; i < 4; i++) {
> +		irq = irq_find_mapping(pcie->legacy_irq_domain, i + 1);
> +		if (irq > 0)
> +			irq_dispose_mapping(irq);
> +	}
> +
> +	irq_domain_remove(pcie->legacy_irq_domain);
> +
> +#ifdef CONFIG_PCI_MSI
> +	irq_set_chained_handler_and_data(msi->irq_msi0, NULL, NULL);
> +	irq_set_chained_handler_and_data(msi->irq_msi1, NULL, NULL);
> +
> +	irq_domain_remove(msi->msi_domain);
> +	irq_domain_remove(msi->dev_domain);
> +#endif
> +
> +}
> +
> +static int nwl_pcie_init_irq_domain(struct nwl_pcie *pcie)
> +{
> +	struct device_node *node = pcie->dev->of_node;
> +	struct device_node *legacy_intc_node;
> +
> +#ifdef CONFIG_PCI_MSI
> +	struct nwl_msi *msi = &pcie->msi;
> +#endif
> +
> +	legacy_intc_node = of_get_next_child(node, NULL);
> +	if (!legacy_intc_node) {
> +		dev_err(pcie->dev, "No legacy intc node found\n");
> +		return PTR_ERR(legacy_intc_node);
> +	}
> +
> +	pcie->legacy_irq_domain = irq_domain_add_linear(legacy_intc_node, 4,
> +							&legacy_domain_ops,
> +							pcie);
> +
> +	if (!pcie->legacy_irq_domain) {
> +		dev_err(pcie->dev, "failed to create IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +
> +#ifdef CONFIG_PCI_MSI
> +	msi->dev_domain = irq_domain_add_linear(NULL, INT_PCI_MSI_NR,
> +					&dev_msi_domain_ops, pcie);
> +	if (!msi->dev_domain) {
> +		dev_err(pcie->dev, "failed to create dev IRQ domain\n");
> +		return -ENOMEM;
> +	}
> +	msi->msi_domain = pci_msi_create_irq_domain(node,
> +							&nwl_msi_domain_info,
> +							msi->dev_domain);
> +	if (!msi->msi_domain) {
> +		dev_err(pcie->dev, "failed to create msi IRQ domain\n");
> +		irq_domain_remove(msi->dev_domain);
> +		return -ENOMEM;
> +	}
> +#endif
> +	return 0;
> +}
> +
> +static int nwl_pcie_enable_msi(struct nwl_pcie *pcie, struct pci_bus *bus)
> +{
> +	struct platform_device *pdev = to_platform_device(pcie->dev);
> +	struct nwl_msi *msi = &pcie->msi;
> +	unsigned long base;
> +	int ret;
> +
> +	mutex_init(&msi->lock);
> +
> +	/* Check for msii_present bit */
> +	ret = nwl_bridge_readl(pcie, I_MSII_CAPABILITIES) & MSII_PRESENT;
> +	if (!ret) {
> +		dev_err(pcie->dev, "MSI not present\n");
> +		ret = -EIO;
> +		goto err;
> +	}
> +
> +	/* Enable MSII */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> +			  MSII_ENABLE, I_MSII_CONTROL);
> +
> +	/* Enable MSII status */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, I_MSII_CONTROL) |
> +			  MSII_STATUS_ENABLE, I_MSII_CONTROL);
> +
> +	/* setup AFI/FPCI range */
> +	msi->pages = __get_free_pages(GFP_KERNEL, 0);
> +	base = virt_to_phys((void *)msi->pages);
> +	nwl_bridge_writel(pcie, lower_32_bits(base), I_MSII_BASE_LO);
> +	nwl_bridge_writel(pcie, upper_32_bits(base), I_MSII_BASE_HI);
> +
> +	/* Disable high range msi interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
> +
> +	/* Clear pending high range msi interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie,  MSGF_MSI_STATUS_HI) &
> +			  MSGF_MSI_SR_HI_MASK, MSGF_MSI_STATUS_HI);
> +	/* Get msi_1 IRQ number */
> +	msi->irq_msi1 = platform_get_irq_byname(pdev, "msi1");
> +	if (msi->irq_msi1 < 0) {
> +		dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi1);
> +		goto err;
> +	}
> +	/* Register msi handler */
> +	irq_set_chained_handler_and_data(msi->irq_msi1,
> +					 nwl_pcie_msi_handler_high, pcie);
> +
> +	/* Enable all high range msi interrupts */
> +	nwl_bridge_writel(pcie, MSGF_MSI_SR_HI_MASK, MSGF_MSI_MASK_HI);
> +
> +	/* Disable low range msi interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
> +
> +	/* Clear pending low range msi interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MSI_STATUS_LO) &
> +			  MSGF_MSI_SR_LO_MASK, MSGF_MSI_STATUS_LO);
> +	/* Get msi_0 IRQ number */
> +	msi->irq_msi0 = platform_get_irq_byname(pdev, "msi0");
> +	if (msi->irq_msi0 < 0) {
> +		dev_err(&pdev->dev, "failed to get IRQ#%d\n", msi->irq_msi0);
> +		goto err;
> +	}
> +
> +	/* Register msi handler */
> +	irq_set_chained_handler_and_data(msi->irq_msi0,
> +					 nwl_pcie_msi_handler_low, pcie);
> +
> +	/* Enable all low range msi interrupts */
> +	nwl_bridge_writel(pcie, MSGF_MSI_SR_LO_MASK, MSGF_MSI_MASK_LO);
> +
> +	return 0;
> +err:
> +	return ret;
> +}
> +
> +static int nwl_pcie_bridge_init(struct nwl_pcie *pcie)
> +{
> +	struct platform_device *pdev = to_platform_device(pcie->dev);
> +	u32 breg_val, ecam_val, first_busno = 0;
> +	int err;
> +	int check_link_up = 0;
> +
> +	/* Check for BREG present bit */
> +	breg_val = nwl_bridge_readl(pcie, E_BREG_CAPABILITIES) & BREG_PRESENT;
> +	if (!breg_val) {
> +		dev_err(pcie->dev, "BREG is not present\n");
> +		return breg_val;
> +	}
> +	/* Write bridge_off to breg base */
> +	nwl_bridge_writel(pcie, (u32)(pcie->phys_breg_base),
> +			  E_BREG_BASE_LO);
> +
> +	/* Enable BREG */
> +	nwl_bridge_writel(pcie, ~BREG_ENABLE_FORCE & BREG_ENABLE,
> +			  E_BREG_CONTROL);
> +
> +	/* Disable DMA channel registers */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_PCIE_RX0) |
> +			  CFG_DMA_REG_BAR, BRCFG_PCIE_RX0);
> +
> +	/* Enable the bridge config interrupt */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, BRCFG_INTERRUPT) |
> +			  BRCFG_INTERRUPT_MASK, BRCFG_INTERRUPT);
> +	/* Enable Ingress subtractive decode translation */
> +	nwl_bridge_writel(pcie, SET_ISUB_CONTROL, I_ISUB_CONTROL);
> +
> +	/* Enable msg filtering details */
> +	nwl_bridge_writel(pcie, CFG_ENABLE_MSG_FILTER_MASK,
> +			  BRCFG_PCIE_RX_MSG_FILTER);
> +	do {
> +		err = nwl_pcie_link_up(pcie, PHY_RDY_LINKUP);
> +		if (err != 1) {
> +			check_link_up++;
> +			if (check_link_up > LINKUP_ITER_CHECK)
> +				return -ENODEV;
> +			mdelay(1000);
> +		}
> +	} while (!err);
> +
> +	/* Check for ECAM present bit */
> +	ecam_val = nwl_bridge_readl(pcie, E_ECAM_CAPABILITIES) & E_ECAM_PRESENT;
> +	if (!ecam_val) {
> +		dev_err(pcie->dev, "ECAM is not present\n");
> +		return ecam_val;
> +	}
> +
> +	/* Enable ECAM */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> +			  E_ECAM_CR_ENABLE, E_ECAM_CONTROL);
> +	/* Write ecam_value on ecam_control */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, E_ECAM_CONTROL) |
> +			  (pcie->ecam_value << E_ECAM_SIZE_SHIFT),
> +			  E_ECAM_CONTROL);
> +	/* Write phy_reg_base to ecam base */
> +	nwl_bridge_writel(pcie, (u32)pcie->phys_ecam_base, E_ECAM_BASE_LO);
> +
> +	/* Get bus range */
> +	ecam_val = nwl_bridge_readl(pcie, E_ECAM_CONTROL);
> +	pcie->last_busno = (ecam_val & E_ECAM_SIZE_LOC) >> E_ECAM_SIZE_SHIFT;
> +	/* Write primary, secondary and subordinate bus numbers */
> +	ecam_val = first_busno;
> +	ecam_val |= (first_busno + 1) << 8;
> +	ecam_val |= (pcie->last_busno << E_ECAM_SIZE_SHIFT);
> +	writel(ecam_val, (pcie->ecam_base + PCI_PRIMARY_BUS));
> +
> +	/* Check if PCIe link is up? */
> +	pcie->link_up = nwl_pcie_link_up(pcie, PCIE_USER_LINKUP);
> +	if (!pcie->link_up)
> +		dev_info(pcie->dev, "Link is DOWN\n");
> +	else
> +		dev_info(pcie->dev, "Link is UP\n");
> +
> +	/* Disable all misc interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> +	/* Clear pending misc interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_MISC_STATUS) &
> +			  MSGF_MISC_SR_MASKALL, MSGF_MISC_STATUS);
> +
> +	/* Get misc IRQ number */
> +	pcie->irq_misc = platform_get_irq_byname(pdev, "misc");
> +	if (pcie->irq_misc < 0) {
> +		dev_err(&pdev->dev, "failed to get misc IRQ#%d\n",
> +			pcie->irq_misc);
> +		return pcie->irq_misc;
> +	}
> +	/* Register misc handler */
> +	err = devm_request_irq(pcie->dev, pcie->irq_misc,
> +			       nwl_pcie_misc_handler, IRQF_SHARED,
> +			       "nwl_pcie:misc", pcie);
> +	if (err) {
> +		dev_err(pcie->dev, "fail to register misc IRQ#%d\n",
> +			pcie->irq_misc);
> +		return err;
> +	}
> +	/* Enable all misc interrupts */
> +	nwl_bridge_writel(pcie, MSGF_MISC_SR_MASKALL, MSGF_MISC_MASK);
> +
> +	/* Disable all legacy interrupts */
> +	nwl_bridge_writel(pcie, (u32)~MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> +	/* Clear pending legacy interrupts */
> +	nwl_bridge_writel(pcie, nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
> +			  MSGF_LEG_SR_MASKALL, MSGF_LEG_STATUS);
> +	/* Get intx IRQ number */
> +	pcie->irq_intx = platform_get_irq_byname(pdev, "intx");
> +	if (pcie->irq_intx < 0) {
> +		dev_err(&pdev->dev, "failed to get intx IRQ#%d\n",
> +			pcie->irq_intx);
> +		return pcie->irq_intx;
> +	}
> +
> +	/* Enable all legacy interrupts */
> +	nwl_bridge_writel(pcie, MSGF_LEG_SR_MASKALL, MSGF_LEG_MASK);
> +
> +	return 0;
> +}
> +
> +static int nwl_pcie_parse_dt(struct nwl_pcie *pcie,
> +					struct platform_device *pdev)
> +{
> +	struct device_node *node = pcie->dev->of_node;
> +	struct resource *res;
> +	const char *type;
> +
> +	/* Check for device type */
> +	type = of_get_property(node, "device_type", NULL);
> +	if (!type || strcmp(type, "pci")) {
> +		dev_err(pcie->dev, "invalid \"device_type\" %s\n", type);
> +		return -EINVAL;
> +	}
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg");
> +	pcie->breg_base = devm_ioremap_resource(pcie->dev, res);
> +	if (IS_ERR(pcie->breg_base))
> +		return PTR_ERR(pcie->breg_base);
> +	pcie->phys_breg_base = res->start;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcireg");
> +	pcie->pcireg_base = devm_ioremap_resource(pcie->dev, res);
> +	if (IS_ERR(pcie->pcireg_base))
> +		return PTR_ERR(pcie->pcireg_base);
> +	pcie->phys_pcie_reg_base = res->start;
> +
> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cfg");
> +	pcie->ecam_base = devm_ioremap_resource(pcie->dev, res);
> +	if (IS_ERR(pcie->ecam_base))
> +		return PTR_ERR(pcie->ecam_base);
> +	pcie->phys_ecam_base = res->start;
> +
> +	/* Get intx IRQ number */
> +	pcie->irq_intx = platform_get_irq_byname(pdev, "intx");
> +	if (pcie->irq_intx < 0) {
> +		dev_err(&pdev->dev, "failed to get intx IRQ#%d\n",
> +			pcie->irq_intx);
> +		return pcie->irq_intx;
> +	}
> +
> +	/* Register intx handler */
> +	irq_set_chained_handler_and_data(pcie->irq_intx,
> +					 nwl_pcie_leg_handler, pcie);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id nwl_pcie_of_match[] = {
> +	{ .compatible = "xlnx,nwl-pcie-2.11", },
> +	{}
> +};
> +
> +static int nwl_pcie_probe(struct platform_device *pdev)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct nwl_pcie *pcie;
> +	struct pci_bus *bus;
> +	int err;
> +
> +	resource_size_t iobase = 0;
> +	LIST_HEAD(res);
> +
> +	pcie = devm_kzalloc(&pdev->dev, sizeof(*pcie), GFP_KERNEL);
> +	if (!pcie)
> +		return -ENOMEM;
> +
> +	pcie->ecam_value = NWL_ECAM_VALUE_DEFAULT;
> +
> +	pcie->dev = &pdev->dev;
> +
> +	err = nwl_pcie_parse_dt(pcie, pdev);
> +	if (err) {
> +		dev_err(pcie->dev, "Parsing DT failed\n");
> +		return err;
> +	}
> +	/* Bridge initialization */
> +	err = nwl_pcie_bridge_init(pcie);
> +	if (err) {
> +		dev_err(pcie->dev, "HW Initalization failed\n");
> +		return err;
> +	}
> +
> +	err = of_pci_get_host_bridge_resources(node, 0, 0xff, &res, &iobase);
> +	if (err) {
> +		pr_err("Getting bridge resources failed\n");
> +		return err;
> +	}
> +
> +	err = nwl_pcie_init_irq_domain(pcie);
> +	if (err) {
> +		dev_err(pcie->dev, "Failed creating IRQ Domain\n");
> +		return err;
> +	}
> +
> +	bus = pci_create_root_bus(&pdev->dev, pcie->root_busno,
> +				  &nwl_pcie_ops, pcie, &res);
> +	if (!bus)
> +		return -ENOMEM;
> +
> +	/* Enable MSI */
> +	if (IS_ENABLED(CONFIG_PCI_MSI)) {
> +		err = nwl_pcie_enable_msi(pcie, bus);
> +		if (err < 0) {
> +			dev_err(&pdev->dev,
> +				"failed to enable MSI support: %d\n", err);
> +			return err;
> +		}
> +	}
> +	pci_scan_child_bus(bus);
> +	pci_assign_unassigned_bus_resources(bus);
> +	pcie_bus_configure_settings(bus);
> +	pci_bus_add_devices(bus);
> +	platform_set_drvdata(pdev, pcie);
> +
> +	return 0;
> +}
> +
> +static int nwl_pcie_remove(struct platform_device *pdev)
> +{
> +	struct nwl_pcie *pcie = platform_get_drvdata(pdev);
> +
> +	nwl_pcie_free_irq_domain(pcie);
> +	platform_set_drvdata(pdev, NULL);
> +
> +	return 0;
> +}
> +
> +static struct platform_driver nwl_pcie_driver = {
> +	.driver = {
> +		.name = "nwl-pcie",
> +		.of_match_table = nwl_pcie_of_match,
> +	},
> +	.probe = nwl_pcie_probe,
> +	.remove = nwl_pcie_remove,
> +};
> +module_platform_driver(nwl_pcie_driver);
> +
> +MODULE_AUTHOR("Xilinx, Inc");
> +MODULE_DESCRIPTION("NWL PCIe driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.1.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html