@@ -232,4 +232,18 @@ int spi_flash_mtd_register(struct spi_flash *flash);
void spi_flash_mtd_unregister(void);
#endif
+/**
+ * spi_flash_scan - scan the SPI FLASH
+ * @spi: the spi slave structure
+ * @idcode: idcode of spi flash
+ * @flash: the spi flash structure
+ *
+ * The drivers can use this fuction to scan the SPI FLASH.
+ * In the scanning, it will try to get all the necessary information to
+ * fill the spi_flash{}.
+ *
+ * Return: 0 for success, others for failure.
+ */
+int spi_flash_scan(struct spi_slave *spi, u8 *idcode, struct spi_flash *flash);
+
#endif /* _SF_INTERNAL_H_ */
@@ -11,6 +11,7 @@
#include <common.h>
#include <errno.h>
#include <malloc.h>
+#include <mapmem.h>
#include <spi.h>
#include <spi_flash.h>
#include <watchdog.h>
@@ -18,6 +19,8 @@
#include "sf_internal.h"
+DECLARE_GLOBAL_DATA_PTR;
+
static void spi_flash_addr(u32 addr, u8 *cmd)
{
/* cmd[0] is actual command */
@@ -565,3 +568,328 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
return ret;
}
#endif
+
+
+/* Read commands array */
+static u8 spi_read_cmds_array[] = {
+ CMD_READ_ARRAY_SLOW,
+ CMD_READ_ARRAY_FAST,
+ CMD_READ_DUAL_OUTPUT_FAST,
+ CMD_READ_DUAL_IO_FAST,
+ CMD_READ_QUAD_OUTPUT_FAST,
+ CMD_READ_QUAD_IO_FAST,
+};
+
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
+{
+ u8 qeb_status;
+ int ret;
+
+ ret = spi_flash_cmd_read_status(flash, &qeb_status);
+ if (ret < 0)
+ return ret;
+
+ if (qeb_status & STATUS_QEB_MXIC) {
+ debug("SF: mxic: QEB is already set\n");
+ } else {
+ ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+#endif
+
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
+{
+ u8 qeb_status;
+ int ret;
+
+ ret = spi_flash_cmd_read_config(flash, &qeb_status);
+ if (ret < 0)
+ return ret;
+
+ if (qeb_status & STATUS_QEB_WINSPAN) {
+ debug("SF: winspan: QEB is already set\n");
+ } else {
+ ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+#endif
+
+static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
+{
+ switch (idcode0) {
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+ case SPI_FLASH_CFI_MFR_MACRONIX:
+ return spi_flash_set_qeb_mxic(flash);
+#endif
+#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
+ case SPI_FLASH_CFI_MFR_SPANSION:
+ case SPI_FLASH_CFI_MFR_WINBOND:
+ return spi_flash_set_qeb_winspan(flash);
+#endif
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ case SPI_FLASH_CFI_MFR_STMICRO:
+ debug("SF: QEB is volatile for %02x flash\n", idcode0);
+ return 0;
+#endif
+ default:
+ printf("SF: Need set QEB func for %02x flash\n", idcode0);
+ return -1;
+ }
+}
+
+#ifdef CONFIG_SPI_FLASH_BAR
+static int spi_flash_read_bank(struct spi_flash *flash, u8 idcode0)
+{
+ u8 curr_bank = 0;
+ int ret;
+
+ if (flash->size <= SPI_FLASH_16MB_BOUN)
+ goto bank_end;
+
+ switch (idcode0) {
+ case SPI_FLASH_CFI_MFR_SPANSION:
+ flash->bank_read_cmd = CMD_BANKADDR_BRRD;
+ flash->bank_write_cmd = CMD_BANKADDR_BRWR;
+ default:
+ flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
+ flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
+ }
+
+ ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
+ &curr_bank, 1);
+ if (ret) {
+ debug("SF: fail to read bank addr register\n");
+ return ret;
+ }
+
+bank_end:
+ flash->bank_curr = curr_bank;
+ return 0;
+}
+#endif
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
+{
+ fdt_addr_t addr;
+ fdt_size_t size;
+ int node;
+
+ /* If there is no node, do nothing */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
+ if (node < 0)
+ return 0;
+
+ addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot decode address\n", __func__);
+ return 0;
+ }
+
+ if (flash->size != size) {
+ debug("%s: Memory map must cover entire device\n", __func__);
+ return -1;
+ }
+ flash->memory_map = map_sysmem(addr, size);
+
+ return 0;
+}
+#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
+
+int spi_flash_scan(struct spi_slave *spi, u8 *idcode, struct spi_flash *flash)
+{
+ const struct spi_flash_params *params;
+ u8 cmd;
+ u16 jedec = idcode[1] << 8 | idcode[2];
+ u16 ext_jedec = idcode[3] << 8 | idcode[4];
+ int ret;
+
+ /* Validate params from spi_flash_params table */
+ params = spi_flash_params_table;
+ for (; params->name != NULL; params++) {
+ if ((params->jedec >> 16) == idcode[0]) {
+ if ((params->jedec & 0xFFFF) == jedec) {
+ if (params->ext_jedec == 0)
+ break;
+ else if (params->ext_jedec == ext_jedec)
+ break;
+ }
+ }
+ }
+
+ if (!params->name) {
+ printf("SF: Unsupported flash IDs: ");
+ printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
+ idcode[0], jedec, ext_jedec);
+ return -EPROTONOSUPPORT;
+ }
+
+ /* Flash powers up read-only, so clear BP# bits */
+#if defined(CONFIG_SPI_FLASH_ATMEL) || \
+ defined(CONFIG_SPI_FLASH_MACRONIX) || \
+ defined(CONFIG_SPI_FLASH_SST)
+ spi_flash_cmd_write_status(flash, 0);
+#endif
+
+ /* Assign spi data */
+ flash->spi = spi;
+ flash->name = params->name;
+ flash->memory_map = spi->memory_map;
+ flash->dual_flash = flash->spi->option;
+
+ /* Assign spi_flash ops */
+#ifndef CONFIG_DM_SPI_FLASH
+ flash->write = spi_flash_cmd_write_ops;
+#if defined(CONFIG_SPI_FLASH_SST)
+ if (params->flags & SST_WR)
+ flash->flags |= SNOR_F_SST_WR;
+
+ if (params->flags & SNOR_F_SST_WR) {
+ if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
+ flash->write = sst_write_bp;
+ else
+ flash->write = sst_write_wp;
+ }
+#endif
+ flash->erase = spi_flash_cmd_erase_ops;
+ flash->read = spi_flash_cmd_read_ops;
+#endif
+
+ /* Compute the flash size */
+ flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
+ /*
+ * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
+ * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
+ * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
+ * have 256b pages.
+ */
+ if (ext_jedec == 0x4d00) {
+ if ((jedec == 0x0215) || (jedec == 0x216))
+ flash->page_size = 256;
+ else
+ flash->page_size = 512;
+ } else {
+ flash->page_size = 256;
+ }
+ flash->page_size <<= flash->shift;
+ flash->sector_size = params->sector_size << flash->shift;
+ flash->size = flash->sector_size * params->nr_sectors << flash->shift;
+#ifdef CONFIG_SF_DUAL_FLASH
+ if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
+ flash->size <<= 1;
+#endif
+
+ /* Compute erase sector and command */
+ if (params->flags & SECT_4K) {
+ flash->erase_cmd = CMD_ERASE_4K;
+ flash->erase_size = 4096 << flash->shift;
+ } else if (params->flags & SECT_32K) {
+ flash->erase_cmd = CMD_ERASE_32K;
+ flash->erase_size = 32768 << flash->shift;
+ } else {
+ flash->erase_cmd = CMD_ERASE_64K;
+ flash->erase_size = flash->sector_size;
+ }
+
+ /* Now erase size becomes valid sector size */
+ flash->sector_size = flash->erase_size;
+
+ /* Look for the fastest read cmd */
+ cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
+ if (cmd) {
+ cmd = spi_read_cmds_array[cmd - 1];
+ flash->read_cmd = cmd;
+ } else {
+ /* Go for default supported read cmd */
+ flash->read_cmd = CMD_READ_ARRAY_FAST;
+ }
+
+ /* Not require to look for fastest only two write cmds yet */
+ if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
+ flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
+ else
+ /* Go for default supported write cmd */
+ flash->write_cmd = CMD_PAGE_PROGRAM;
+
+ /* Set the quad enable bit - only for quad commands */
+ if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
+ (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
+ (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
+ ret = spi_flash_set_qeb(flash, idcode[0]);
+ if (ret) {
+ debug("SF: Fail to set QEB for %02x\n", idcode[0]);
+ return -EINVAL;
+ }
+ }
+
+ /* Read dummy_byte: dummy byte is determined based on the
+ * dummy cycles of a particular command.
+ * Fast commands - dummy_byte = dummy_cycles/8
+ * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
+ * For I/O commands except cmd[0] everything goes on no.of lines
+ * based on particular command but incase of fast commands except
+ * data all go on single line irrespective of command.
+ */
+ switch (flash->read_cmd) {
+ case CMD_READ_QUAD_IO_FAST:
+ flash->dummy_byte = 2;
+ break;
+ case CMD_READ_ARRAY_SLOW:
+ flash->dummy_byte = 0;
+ break;
+ default:
+ flash->dummy_byte = 1;
+ }
+
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ if (params->flags & E_FSR)
+ flash->flags |= SNOR_F_USE_FSR;
+#endif
+
+ /* Configure the BAR - discover bank cmds and read current bank */
+#ifdef CONFIG_SPI_FLASH_BAR
+ ret = spi_flash_read_bank(flash, idcode[0]);
+ if (ret < 0)
+ return ret;
+#endif
+
+#if CONFIG_IS_ENABLED(OF_CONTROL)
+ ret = spi_flash_decode_fdt(gd->fdt_blob, flash);
+ if (ret) {
+ debug("SF: FDT decode error\n");
+ return -EINVAL;
+ }
+#endif
+
+#ifndef CONFIG_SPL_BUILD
+ printf("SF: Detected %s with page size ", flash->name);
+ print_size(flash->page_size, ", erase size ");
+ print_size(flash->erase_size, ", total ");
+ print_size(flash->size, "");
+ if (flash->memory_map)
+ printf(", mapped at %p", flash->memory_map);
+ puts("\n");
+#endif
+
+#ifndef CONFIG_SPI_FLASH_BAR
+ if (((flash->dual_flash == SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN)) ||
+ ((flash->dual_flash > SF_SINGLE_FLASH) &&
+ (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
+ puts("SF: Warning - Only lower 16MiB accessible,");
+ puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
+ }
+#endif
+
+ return ret;
+}
@@ -20,333 +20,6 @@
#include "sf_internal.h"
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Read commands array */
-static u8 spi_read_cmds_array[] = {
- CMD_READ_ARRAY_SLOW,
- CMD_READ_ARRAY_FAST,
- CMD_READ_DUAL_OUTPUT_FAST,
- CMD_READ_DUAL_IO_FAST,
- CMD_READ_QUAD_OUTPUT_FAST,
- CMD_READ_QUAD_IO_FAST,
-};
-
-#ifdef CONFIG_SPI_FLASH_MACRONIX
-static int spi_flash_set_qeb_mxic(struct spi_flash *flash)
-{
- u8 qeb_status;
- int ret;
-
- ret = spi_flash_cmd_read_status(flash, &qeb_status);
- if (ret < 0)
- return ret;
-
- if (qeb_status & STATUS_QEB_MXIC) {
- debug("SF: mxic: QEB is already set\n");
- } else {
- ret = spi_flash_cmd_write_status(flash, STATUS_QEB_MXIC);
- if (ret < 0)
- return ret;
- }
-
- return ret;
-}
-#endif
-
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
-static int spi_flash_set_qeb_winspan(struct spi_flash *flash)
-{
- u8 qeb_status;
- int ret;
-
- ret = spi_flash_cmd_read_config(flash, &qeb_status);
- if (ret < 0)
- return ret;
-
- if (qeb_status & STATUS_QEB_WINSPAN) {
- debug("SF: winspan: QEB is already set\n");
- } else {
- ret = spi_flash_cmd_write_config(flash, STATUS_QEB_WINSPAN);
- if (ret < 0)
- return ret;
- }
-
- return ret;
-}
-#endif
-
-static int spi_flash_set_qeb(struct spi_flash *flash, u8 idcode0)
-{
- switch (idcode0) {
-#ifdef CONFIG_SPI_FLASH_MACRONIX
- case SPI_FLASH_CFI_MFR_MACRONIX:
- return spi_flash_set_qeb_mxic(flash);
-#endif
-#if defined(CONFIG_SPI_FLASH_SPANSION) || defined(CONFIG_SPI_FLASH_WINBOND)
- case SPI_FLASH_CFI_MFR_SPANSION:
- case SPI_FLASH_CFI_MFR_WINBOND:
- return spi_flash_set_qeb_winspan(flash);
-#endif
-#ifdef CONFIG_SPI_FLASH_STMICRO
- case SPI_FLASH_CFI_MFR_STMICRO:
- debug("SF: QEB is volatile for %02x flash\n", idcode0);
- return 0;
-#endif
- default:
- printf("SF: Need set QEB func for %02x flash\n", idcode0);
- return -1;
- }
-}
-
-#ifdef CONFIG_SPI_FLASH_BAR
-static int spi_flash_read_bank(struct spi_flash *flash, u8 idcode0)
-{
- u8 curr_bank = 0;
- int ret;
-
- if (flash->size <= SPI_FLASH_16MB_BOUN)
- goto bank_end;
-
- switch (idcode0) {
- case SPI_FLASH_CFI_MFR_SPANSION:
- flash->bank_read_cmd = CMD_BANKADDR_BRRD;
- flash->bank_write_cmd = CMD_BANKADDR_BRWR;
- default:
- flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
- flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
- }
-
- ret = spi_flash_read_common(flash, &flash->bank_read_cmd, 1,
- &curr_bank, 1);
- if (ret) {
- debug("SF: fail to read bank addr register\n");
- return ret;
- }
-
-bank_end:
- flash->bank_curr = curr_bank;
- return 0;
-}
-#endif
-
-#if CONFIG_IS_ENABLED(OF_CONTROL)
-int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
-{
- fdt_addr_t addr;
- fdt_size_t size;
- int node;
-
- /* If there is no node, do nothing */
- node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
- if (node < 0)
- return 0;
-
- addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
- if (addr == FDT_ADDR_T_NONE) {
- debug("%s: Cannot decode address\n", __func__);
- return 0;
- }
-
- if (flash->size != size) {
- debug("%s: Memory map must cover entire device\n", __func__);
- return -1;
- }
- flash->memory_map = map_sysmem(addr, size);
-
- return 0;
-}
-#endif /* CONFIG_IS_ENABLED(OF_CONTROL) */
-
-static int spi_flash_scan(struct spi_slave *spi, u8 *idcode,
- struct spi_flash *flash)
-{
- const struct spi_flash_params *params;
- u8 cmd;
- u16 jedec = idcode[1] << 8 | idcode[2];
- u16 ext_jedec = idcode[3] << 8 | idcode[4];
- int ret;
-
- /* Validate params from spi_flash_params table */
- params = spi_flash_params_table;
- for (; params->name != NULL; params++) {
- if ((params->jedec >> 16) == idcode[0]) {
- if ((params->jedec & 0xFFFF) == jedec) {
- if (params->ext_jedec == 0)
- break;
- else if (params->ext_jedec == ext_jedec)
- break;
- }
- }
- }
-
- if (!params->name) {
- printf("SF: Unsupported flash IDs: ");
- printf("manuf %02x, jedec %04x, ext_jedec %04x\n",
- idcode[0], jedec, ext_jedec);
- return -EPROTONOSUPPORT;
- }
-
- /* Flash powers up read-only, so clear BP# bits */
-#if defined(CONFIG_SPI_FLASH_ATMEL) || \
- defined(CONFIG_SPI_FLASH_MACRONIX) || \
- defined(CONFIG_SPI_FLASH_SST)
- spi_flash_cmd_write_status(flash, 0);
-#endif
-
- /* Assign spi data */
- flash->spi = spi;
- flash->name = params->name;
- flash->memory_map = spi->memory_map;
- flash->dual_flash = flash->spi->option;
-
- /* Assign spi_flash ops */
-#ifndef CONFIG_DM_SPI_FLASH
- flash->write = spi_flash_cmd_write_ops;
-#if defined(CONFIG_SPI_FLASH_SST)
- if (params->flags & SST_WR)
- flash->flags |= SNOR_F_SST_WR;
-
- if (params->flags & SNOR_F_SST_WR) {
- if (flash->spi->op_mode_tx & SPI_OPM_TX_BP)
- flash->write = sst_write_bp;
- else
- flash->write = sst_write_wp;
- }
-#endif
- flash->erase = spi_flash_cmd_erase_ops;
- flash->read = spi_flash_cmd_read_ops;
-#endif
-
- /* Compute the flash size */
- flash->shift = (flash->dual_flash & SF_DUAL_PARALLEL_FLASH) ? 1 : 0;
- /*
- * The Spansion S25FL032P and S25FL064P have 256b pages, yet use the
- * 0x4d00 Extended JEDEC code. The rest of the Spansion flashes with
- * the 0x4d00 Extended JEDEC code have 512b pages. All of the others
- * have 256b pages.
- */
- if (ext_jedec == 0x4d00) {
- if ((jedec == 0x0215) || (jedec == 0x216))
- flash->page_size = 256;
- else
- flash->page_size = 512;
- } else {
- flash->page_size = 256;
- }
- flash->page_size <<= flash->shift;
- flash->sector_size = params->sector_size << flash->shift;
- flash->size = flash->sector_size * params->nr_sectors << flash->shift;
-#ifdef CONFIG_SF_DUAL_FLASH
- if (flash->dual_flash & SF_DUAL_STACKED_FLASH)
- flash->size <<= 1;
-#endif
-
- /* Compute erase sector and command */
- if (params->flags & SECT_4K) {
- flash->erase_cmd = CMD_ERASE_4K;
- flash->erase_size = 4096 << flash->shift;
- } else if (params->flags & SECT_32K) {
- flash->erase_cmd = CMD_ERASE_32K;
- flash->erase_size = 32768 << flash->shift;
- } else {
- flash->erase_cmd = CMD_ERASE_64K;
- flash->erase_size = flash->sector_size;
- }
-
- /* Now erase size becomes valid sector size */
- flash->sector_size = flash->erase_size;
-
- /* Look for the fastest read cmd */
- cmd = fls(params->e_rd_cmd & flash->spi->op_mode_rx);
- if (cmd) {
- cmd = spi_read_cmds_array[cmd - 1];
- flash->read_cmd = cmd;
- } else {
- /* Go for default supported read cmd */
- flash->read_cmd = CMD_READ_ARRAY_FAST;
- }
-
- /* Not require to look for fastest only two write cmds yet */
- if (params->flags & WR_QPP && flash->spi->op_mode_tx & SPI_OPM_TX_QPP)
- flash->write_cmd = CMD_QUAD_PAGE_PROGRAM;
- else
- /* Go for default supported write cmd */
- flash->write_cmd = CMD_PAGE_PROGRAM;
-
- /* Set the quad enable bit - only for quad commands */
- if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
- (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
- (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
- ret = spi_flash_set_qeb(flash, idcode[0]);
- if (ret) {
- debug("SF: Fail to set QEB for %02x\n", idcode[0]);
- return -EINVAL;
- }
- }
-
- /* Read dummy_byte: dummy byte is determined based on the
- * dummy cycles of a particular command.
- * Fast commands - dummy_byte = dummy_cycles/8
- * I/O commands- dummy_byte = (dummy_cycles * no.of lines)/8
- * For I/O commands except cmd[0] everything goes on no.of lines
- * based on particular command but incase of fast commands except
- * data all go on single line irrespective of command.
- */
- switch (flash->read_cmd) {
- case CMD_READ_QUAD_IO_FAST:
- flash->dummy_byte = 2;
- break;
- case CMD_READ_ARRAY_SLOW:
- flash->dummy_byte = 0;
- break;
- default:
- flash->dummy_byte = 1;
- }
-
-#ifdef CONFIG_SPI_FLASH_STMICRO
- if (params->flags & E_FSR)
- flash->flags |= SNOR_F_USE_FSR;
-#endif
-
- /* Configure the BAR - discover bank cmds and read current bank */
-#ifdef CONFIG_SPI_FLASH_BAR
- ret = spi_flash_read_bank(flash, idcode[0]);
- if (ret < 0)
- return ret;
-#endif
-
-#if CONFIG_IS_ENABLED(OF_CONTROL)
- ret = spi_flash_decode_fdt(gd->fdt_blob, flash);
- if (ret) {
- debug("SF: FDT decode error\n");
- return -EINVAL;
- }
-#endif
-
-#ifndef CONFIG_SPL_BUILD
- printf("SF: Detected %s with page size ", flash->name);
- print_size(flash->page_size, ", erase size ");
- print_size(flash->erase_size, ", total ");
- print_size(flash->size, "");
- if (flash->memory_map)
- printf(", mapped at %p", flash->memory_map);
- puts("\n");
-#endif
-
-#ifndef CONFIG_SPI_FLASH_BAR
- if (((flash->dual_flash == SF_SINGLE_FLASH) &&
- (flash->size > SPI_FLASH_16MB_BOUN)) ||
- ((flash->dual_flash > SF_SINGLE_FLASH) &&
- (flash->size > SPI_FLASH_16MB_BOUN << 1))) {
- puts("SF: Warning - Only lower 16MiB accessible,");
- puts(" Full access #define CONFIG_SPI_FLASH_BAR\n");
- }
-#endif
-
- return ret;
-}
-
/**
* spi_flash_probe_slave() - Probe for a SPI flash device on a bus
*
Intension is that sf_ops should deals all spi_flash related stuff and sf_probe (which should renamed future) should be an interface layer for spi_flash versus spi drivers. sf_ops => spi_flash interface sf_probe => interface layer vs spi_flash(sf_probe) to spi drivers Signed-off-by: Jagan Teki <jteki@openedev.com> --- drivers/mtd/spi/sf_internal.h | 14 ++ drivers/mtd/spi/sf_ops.c | 328 ++++++++++++++++++++++++++++++++++++++++++ drivers/mtd/spi/sf_probe.c | 327 ----------------------------------------- 3 files changed, 342 insertions(+), 327 deletions(-)