| Message ID | 20151022221319.GI21237@localhost |
|---|---|
| State | Accepted |
| Headers | show |
Thanks Bjorn! We really appreciate your help in getting this in. We’ll check your version of the patch ASAP. Casey > On Oct 22, 2015, at 3:13 PM, Bjorn Helgaas <helgaas@kernel.org> wrote: > > Hi Hariprasad & Casey, > > On Sun, Oct 18, 2015 at 07:55:04PM +0530, Hariprasad Shenai wrote: >> Some devices violate the PCI Specification regarding echoing the Root >> Port Transaction Layer Packet Request (TLP) No Snoop and Relaxed >> Ordering Attributes into the TLP Response. The PCI Specification >> "encourages" compliant Root Port implementation to drop such >> malformed TLP Responses leading to device access timeouts. Many Root Port >> implementations accept such malformed TLP Responses and a few more >> strict implementations do drop them. >> >> For devices which fail this part of the PCI Specification, we need to >> traverse up the PCI Chain to the Root Port and turn off the Enable No >> Snoop and Enable Relaxed Ordering bits in the Root Port's PCI-Express >> Device Control register. This does affect all other devices which >> are downstream of that Root Port. >> >> Note that Configuration Space accesses are never supposed to have TLP >> Attributes, so we're safe waiting till after any Configuration Space >> accesses to do the Root Port "fixup". >> >> Based on original work by Casey Leedom <leedom@chelsio.com> >> >> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> > > I reworked this and applied the patch below to pci/misc for v4.4. > > Please try it out to make sure I didn't break something. Here's what I > changed: > > - Changelog and comments to include specific spec references (they > were in Casey's original posts but got lost). > > - Renamed to pci_find_pcie_root_port() to keep "root_port" together. > > - Reworked to use pci_upstream_bridge() to avoid issues if we're > under a "virtual bus" used for SR-IOV (this isn't likely to be a > problem, but it's hard to prove it's not). > > - Added a check for "Root Port" device type, with the intent to use > this other places, e.g., to replace pcie_find_root_port(). > > - Removed the "Can't find Root Port" message; if we use > pci_find_pcie_root_port() generically, the caller should be > responsible for deciding if a message is appropriate. > > - Reworded quirk "Can't find Root Port to disable No Snoop/Relaxed > Ordering" message to make it clear that we're trying to work > around a device erratum. I don't think the original message had > enough context to be useful. > > - Reworded "Disabling No Snoop/Relaxed Ordering on Root Port %s' > message, again to make the reason clear (device erratum) and to > use the root port as the affected device. > > Bjorn > > > commit 4cdcda8244d4c7b8a0e37fe2ce8d11d4633c6687 > Author: Hariprasad Shenai <hariprasad@chelsio.com> > Date: Sun Oct 18 19:55:04 2015 +0530 > > PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum > > The Chelsio T5 has a PCIe compliance erratum that causes Malformed TLP or > Unexpected Completion errors in some systems, which may cause device access > timeouts. > > Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same values > for the Attribute as were supplied in the header of the corresponding > Request, except as explicitly allowed when IDO is used." > > Instead of copying the Attributes from the Request to the Completion, the > T5 always generates Completions with zero Attributes. The receiver of a > Completion whose Attributes don't match the Request may accept it (which > itself seems non-compliant based on sec 2.3.2), or it may handle it as a > Malformed TLP or an Unexpected Completion, which will probably lead to a > device access timeout. > > Work around this by disabling "Relaxed Ordering" and "No Snoop" in the Root > Port so it always generate Requests with zero Attributes. > > This does affect all other devices which are downstream of that Root Port, > but these are performance optimizations that should not make a functional > difference. > > Note that Configuration Space accesses are never supposed to have TLP > Attributes, so we're safe waiting till after any Configuration Space > accesses to do the Root Port "fixup". > > Based on original work by Casey Leedom <leedom@chelsio.com> > > [bhelgaas: changelog, comments, rename to pci_find_pcie_root_port(), rework > to use pci_upstream_bridge() and check for Root Port device type, edit > diagnostics to clarify intent and devices affected] > Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > index 6a9a111..3dacbeb 100644 > --- a/drivers/pci/pci.c > +++ b/drivers/pci/pci.c > @@ -458,6 +458,30 @@ struct resource *pci_find_parent_resource(const struct pci_dev *dev, > EXPORT_SYMBOL(pci_find_parent_resource); > > /** > + * pci_find_pcie_root_port - return PCIe Root Port > + * @dev: PCI device to query > + * > + * Traverse up the parent chain and return the PCIe Root Port PCI Device > + * for a given PCI Device. > + */ > +struct pci_dev *pci_find_pcie_root_port(const struct pci_dev *dev) > +{ > + struct pci_dev *bridge, *highest_pcie_bridge = NULL; > + > + bridge = pci_upstream_bridge(dev); > + while (bridge && pci_is_pcie(bridge)) { > + highest_pcie_bridge = bridge; > + bridge = pci_upstream_bridge(bridge); > + } > + > + if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT) > + return NULL; > + > + return highest_pcie_bridge; > +} > +EXPORT_SYMBOL(pci_find_pcie_root_port); > + > +/** > * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos > * @dev: the PCI device to operate on > * @pos: config space offset of status word > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > index 6a30252..eb3c98e 100644 > --- a/drivers/pci/quirks.c > +++ b/drivers/pci/quirks.c > @@ -3692,6 +3692,63 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, > quirk_tw686x_class); > > /* > + * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same > + * values for the Attribute as were supplied in the header of the > + * corresponding Request, except as explicitly allowed when IDO is used." > + * > + * If a non-compliant device generates a completion with a different > + * attribute than the request, the receiver may accept it (which itself > + * seems non-compliant based on sec 2.3.2), or it may handle it as a > + * Malformed TLP or an Unexpected Completion, which will probably lead to a > + * device access timeout. > + * > + * If the non-compliant device generates completions with zero attributes > + * (instead of copying the attributes from the request), we can work around > + * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in > + * upstream devices so they always generate requests with zero attributes. > + * > + * This affects other devices under the same Root Port, but since these > + * attributes are performance hints, there should be no functional problem. > + * > + * Note that Configuration Space accesses are never supposed to have TLP > + * Attributes, so we're safe waiting till after any Configuration Space > + * accesses to do the Root Port fixup. > + */ > +static void quirk_disable_root_port_attributes(struct pci_dev *pdev) > +{ > + struct pci_dev *root_port = pci_find_pcie_root_port(pdev); > + > + if (!root_port) { > + dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); > + return; > + } > + > + dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", > + dev_name(&pdev->dev)); > + pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, > + PCI_EXP_DEVCTL_RELAX_EN | > + PCI_EXP_DEVCTL_NOSNOOP_EN, 0); > +} > + > +/* > + * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the > + * Completion it generates. > + */ > +static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) > +{ > + /* > + * This mask/compare operation selects for Physical Function 4 on a > + * T5. We only need to fix up the Root Port once for any of the > + * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely > + * 0x54xx so we use that one, > + */ > + if ((pdev->device & 0xff00) == 0x5400) > + quirk_disable_root_port_attributes(pdev); > +} > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, > + quirk_chelsio_T5_disable_root_port_attributes); > + > +/* > * AMD has indicated that the devices below do not support peer-to-peer > * in any system where they are found in the southbridge with an AMD > * IOMMU in the system. Multifunction devices that do not support > diff --git a/include/linux/pci.h b/include/linux/pci.h > index b54fbf1..0f3696c 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -820,6 +820,7 @@ void pci_bus_add_device(struct pci_dev *dev); > void pci_read_bridge_bases(struct pci_bus *child); > struct resource *pci_find_parent_resource(const struct pci_dev *dev, > struct resource *res); > +struct pci_dev *pci_find_root_pcie_port(const struct pci_dev *dev); > u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin); > int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); > u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Oct 22, 2015 at 05:07:38PM -0700, Casey Leedom wrote: > Thanks Bjorn! We really appreciate your help in getting this in. We’ll check your version of the patch ASAP. How embarrassing. The patch below doesn't even compile because of a typo and some const issues. I updated it and repushed pci/misc. > > On Oct 22, 2015, at 3:13 PM, Bjorn Helgaas <helgaas@kernel.org> wrote: > > > > Hi Hariprasad & Casey, > > > > On Sun, Oct 18, 2015 at 07:55:04PM +0530, Hariprasad Shenai wrote: > >> Some devices violate the PCI Specification regarding echoing the Root > >> Port Transaction Layer Packet Request (TLP) No Snoop and Relaxed > >> Ordering Attributes into the TLP Response. The PCI Specification > >> "encourages" compliant Root Port implementation to drop such > >> malformed TLP Responses leading to device access timeouts. Many Root Port > >> implementations accept such malformed TLP Responses and a few more > >> strict implementations do drop them. > >> > >> For devices which fail this part of the PCI Specification, we need to > >> traverse up the PCI Chain to the Root Port and turn off the Enable No > >> Snoop and Enable Relaxed Ordering bits in the Root Port's PCI-Express > >> Device Control register. This does affect all other devices which > >> are downstream of that Root Port. > >> > >> Note that Configuration Space accesses are never supposed to have TLP > >> Attributes, so we're safe waiting till after any Configuration Space > >> accesses to do the Root Port "fixup". > >> > >> Based on original work by Casey Leedom <leedom@chelsio.com> > >> > >> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> > > > > I reworked this and applied the patch below to pci/misc for v4.4. > > > > Please try it out to make sure I didn't break something. Here's what I > > changed: > > > > - Changelog and comments to include specific spec references (they > > were in Casey's original posts but got lost). > > > > - Renamed to pci_find_pcie_root_port() to keep "root_port" together. > > > > - Reworked to use pci_upstream_bridge() to avoid issues if we're > > under a "virtual bus" used for SR-IOV (this isn't likely to be a > > problem, but it's hard to prove it's not). > > > > - Added a check for "Root Port" device type, with the intent to use > > this other places, e.g., to replace pcie_find_root_port(). > > > > - Removed the "Can't find Root Port" message; if we use > > pci_find_pcie_root_port() generically, the caller should be > > responsible for deciding if a message is appropriate. > > > > - Reworded quirk "Can't find Root Port to disable No Snoop/Relaxed > > Ordering" message to make it clear that we're trying to work > > around a device erratum. I don't think the original message had > > enough context to be useful. > > > > - Reworded "Disabling No Snoop/Relaxed Ordering on Root Port %s' > > message, again to make the reason clear (device erratum) and to > > use the root port as the affected device. > > > > Bjorn > > > > > > commit 4cdcda8244d4c7b8a0e37fe2ce8d11d4633c6687 > > Author: Hariprasad Shenai <hariprasad@chelsio.com> > > Date: Sun Oct 18 19:55:04 2015 +0530 > > > > PCI: Turn off Request Attributes to avoid Chelsio T5 Completion erratum > > > > The Chelsio T5 has a PCIe compliance erratum that causes Malformed TLP or > > Unexpected Completion errors in some systems, which may cause device access > > timeouts. > > > > Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same values > > for the Attribute as were supplied in the header of the corresponding > > Request, except as explicitly allowed when IDO is used." > > > > Instead of copying the Attributes from the Request to the Completion, the > > T5 always generates Completions with zero Attributes. The receiver of a > > Completion whose Attributes don't match the Request may accept it (which > > itself seems non-compliant based on sec 2.3.2), or it may handle it as a > > Malformed TLP or an Unexpected Completion, which will probably lead to a > > device access timeout. > > > > Work around this by disabling "Relaxed Ordering" and "No Snoop" in the Root > > Port so it always generate Requests with zero Attributes. > > > > This does affect all other devices which are downstream of that Root Port, > > but these are performance optimizations that should not make a functional > > difference. > > > > Note that Configuration Space accesses are never supposed to have TLP > > Attributes, so we're safe waiting till after any Configuration Space > > accesses to do the Root Port "fixup". > > > > Based on original work by Casey Leedom <leedom@chelsio.com> > > > > [bhelgaas: changelog, comments, rename to pci_find_pcie_root_port(), rework > > to use pci_upstream_bridge() and check for Root Port device type, edit > > diagnostics to clarify intent and devices affected] > > Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> > > Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> > > > > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c > > index 6a9a111..3dacbeb 100644 > > --- a/drivers/pci/pci.c > > +++ b/drivers/pci/pci.c > > @@ -458,6 +458,30 @@ struct resource *pci_find_parent_resource(const struct pci_dev *dev, > > EXPORT_SYMBOL(pci_find_parent_resource); > > > > /** > > + * pci_find_pcie_root_port - return PCIe Root Port > > + * @dev: PCI device to query > > + * > > + * Traverse up the parent chain and return the PCIe Root Port PCI Device > > + * for a given PCI Device. > > + */ > > +struct pci_dev *pci_find_pcie_root_port(const struct pci_dev *dev) > > +{ > > + struct pci_dev *bridge, *highest_pcie_bridge = NULL; > > + > > + bridge = pci_upstream_bridge(dev); > > + while (bridge && pci_is_pcie(bridge)) { > > + highest_pcie_bridge = bridge; > > + bridge = pci_upstream_bridge(bridge); > > + } > > + > > + if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT) > > + return NULL; > > + > > + return highest_pcie_bridge; > > +} > > +EXPORT_SYMBOL(pci_find_pcie_root_port); > > + > > +/** > > * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos > > * @dev: the PCI device to operate on > > * @pos: config space offset of status word > > diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c > > index 6a30252..eb3c98e 100644 > > --- a/drivers/pci/quirks.c > > +++ b/drivers/pci/quirks.c > > @@ -3692,6 +3692,63 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, > > quirk_tw686x_class); > > > > /* > > + * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same > > + * values for the Attribute as were supplied in the header of the > > + * corresponding Request, except as explicitly allowed when IDO is used." > > + * > > + * If a non-compliant device generates a completion with a different > > + * attribute than the request, the receiver may accept it (which itself > > + * seems non-compliant based on sec 2.3.2), or it may handle it as a > > + * Malformed TLP or an Unexpected Completion, which will probably lead to a > > + * device access timeout. > > + * > > + * If the non-compliant device generates completions with zero attributes > > + * (instead of copying the attributes from the request), we can work around > > + * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in > > + * upstream devices so they always generate requests with zero attributes. > > + * > > + * This affects other devices under the same Root Port, but since these > > + * attributes are performance hints, there should be no functional problem. > > + * > > + * Note that Configuration Space accesses are never supposed to have TLP > > + * Attributes, so we're safe waiting till after any Configuration Space > > + * accesses to do the Root Port fixup. > > + */ > > +static void quirk_disable_root_port_attributes(struct pci_dev *pdev) > > +{ > > + struct pci_dev *root_port = pci_find_pcie_root_port(pdev); > > + > > + if (!root_port) { > > + dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); > > + return; > > + } > > + > > + dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", > > + dev_name(&pdev->dev)); > > + pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, > > + PCI_EXP_DEVCTL_RELAX_EN | > > + PCI_EXP_DEVCTL_NOSNOOP_EN, 0); > > +} > > + > > +/* > > + * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the > > + * Completion it generates. > > + */ > > +static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) > > +{ > > + /* > > + * This mask/compare operation selects for Physical Function 4 on a > > + * T5. We only need to fix up the Root Port once for any of the > > + * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely > > + * 0x54xx so we use that one, > > + */ > > + if ((pdev->device & 0xff00) == 0x5400) > > + quirk_disable_root_port_attributes(pdev); > > +} > > +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, > > + quirk_chelsio_T5_disable_root_port_attributes); > > + > > +/* > > * AMD has indicated that the devices below do not support peer-to-peer > > * in any system where they are found in the southbridge with an AMD > > * IOMMU in the system. Multifunction devices that do not support > > diff --git a/include/linux/pci.h b/include/linux/pci.h > > index b54fbf1..0f3696c 100644 > > --- a/include/linux/pci.h > > +++ b/include/linux/pci.h > > @@ -820,6 +820,7 @@ void pci_bus_add_device(struct pci_dev *dev); > > void pci_read_bridge_bases(struct pci_bus *child); > > struct resource *pci_find_parent_resource(const struct pci_dev *dev, > > struct resource *res); > > +struct pci_dev *pci_find_root_pcie_port(const struct pci_dev *dev); > > u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin); > > int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); > > u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp); > > -- > To unsubscribe from this list: send the line "unsubscribe linux-pci" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 6a9a111..3dacbeb 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -458,6 +458,30 @@ struct resource *pci_find_parent_resource(const struct pci_dev *dev, EXPORT_SYMBOL(pci_find_parent_resource); /** + * pci_find_pcie_root_port - return PCIe Root Port + * @dev: PCI device to query + * + * Traverse up the parent chain and return the PCIe Root Port PCI Device + * for a given PCI Device. + */ +struct pci_dev *pci_find_pcie_root_port(const struct pci_dev *dev) +{ + struct pci_dev *bridge, *highest_pcie_bridge = NULL; + + bridge = pci_upstream_bridge(dev); + while (bridge && pci_is_pcie(bridge)) { + highest_pcie_bridge = bridge; + bridge = pci_upstream_bridge(bridge); + } + + if (pci_pcie_type(highest_pcie_bridge) != PCI_EXP_TYPE_ROOT_PORT) + return NULL; + + return highest_pcie_bridge; +} +EXPORT_SYMBOL(pci_find_pcie_root_port); + +/** * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos * @dev: the PCI device to operate on * @pos: config space offset of status word diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 6a30252..eb3c98e 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -3692,6 +3692,63 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(0x1797, 0x6869, PCI_CLASS_NOT_DEFINED, 8, quirk_tw686x_class); /* + * Per PCIe r3.0, sec 2.2.9, "Completion headers must supply the same + * values for the Attribute as were supplied in the header of the + * corresponding Request, except as explicitly allowed when IDO is used." + * + * If a non-compliant device generates a completion with a different + * attribute than the request, the receiver may accept it (which itself + * seems non-compliant based on sec 2.3.2), or it may handle it as a + * Malformed TLP or an Unexpected Completion, which will probably lead to a + * device access timeout. + * + * If the non-compliant device generates completions with zero attributes + * (instead of copying the attributes from the request), we can work around + * this by disabling the "Relaxed Ordering" and "No Snoop" attributes in + * upstream devices so they always generate requests with zero attributes. + * + * This affects other devices under the same Root Port, but since these + * attributes are performance hints, there should be no functional problem. + * + * Note that Configuration Space accesses are never supposed to have TLP + * Attributes, so we're safe waiting till after any Configuration Space + * accesses to do the Root Port fixup. + */ +static void quirk_disable_root_port_attributes(struct pci_dev *pdev) +{ + struct pci_dev *root_port = pci_find_pcie_root_port(pdev); + + if (!root_port) { + dev_warn(&pdev->dev, "PCIe Completion erratum may cause device errors\n"); + return; + } + + dev_info(&root_port->dev, "Disabling No Snoop/Relaxed Ordering Attributes to avoid PCIe Completion erratum in %s\n", + dev_name(&pdev->dev)); + pcie_capability_clear_and_set_word(root_port, PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_RELAX_EN | + PCI_EXP_DEVCTL_NOSNOOP_EN, 0); +} + +/* + * The Chelsio T5 chip fails to copy TLP Attributes from a Request to the + * Completion it generates. + */ +static void quirk_chelsio_T5_disable_root_port_attributes(struct pci_dev *pdev) +{ + /* + * This mask/compare operation selects for Physical Function 4 on a + * T5. We only need to fix up the Root Port once for any of the + * PFs. PF[0..3] have PCI Device IDs of 0x50xx, but PF4 is uniquely + * 0x54xx so we use that one, + */ + if ((pdev->device & 0xff00) == 0x5400) + quirk_disable_root_port_attributes(pdev); +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID, + quirk_chelsio_T5_disable_root_port_attributes); + +/* * AMD has indicated that the devices below do not support peer-to-peer * in any system where they are found in the southbridge with an AMD * IOMMU in the system. Multifunction devices that do not support diff --git a/include/linux/pci.h b/include/linux/pci.h index b54fbf1..0f3696c 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -820,6 +820,7 @@ void pci_bus_add_device(struct pci_dev *dev); void pci_read_bridge_bases(struct pci_bus *child); struct resource *pci_find_parent_resource(const struct pci_dev *dev, struct resource *res); +struct pci_dev *pci_find_root_pcie_port(const struct pci_dev *dev); u8 pci_swizzle_interrupt_pin(const struct pci_dev *dev, u8 pin); int pci_get_interrupt_pin(struct pci_dev *dev, struct pci_dev **bridge); u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp);