@@ -26,34 +26,6 @@
#include <net/switchdev.h>
#include "mv88e6xxx.h"
-/* MDIO bus access can be nested in the case of PHYs connected to the
- * internal MDIO bus of the switch, which is accessed via MDIO bus of
- * the Ethernet interface. Avoid lockdep false positives by using
- * mutex_lock_nested().
- */
-static int mv88e6xxx_mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
-{
- int ret;
-
- mutex_lock_nested(&bus->mdio_lock, SINGLE_DEPTH_NESTING);
- ret = bus->read(bus, addr, regnum);
- mutex_unlock(&bus->mdio_lock);
-
- return ret;
-}
-
-static int mv88e6xxx_mdiobus_write(struct mii_bus *bus, int addr, u32 regnum,
- u16 val)
-{
- int ret;
-
- mutex_lock_nested(&bus->mdio_lock, SINGLE_DEPTH_NESTING);
- ret = bus->write(bus, addr, regnum, val);
- mutex_unlock(&bus->mdio_lock);
-
- return ret;
-}
-
/* If the switch's ADDR[4:0] strap pins are strapped to zero, it will
* use all 32 SMI bus addresses on its SMI bus, and all switch registers
* will be directly accessible on some {device address,register address}
@@ -68,7 +40,7 @@ static int mv88e6xxx_reg_wait_ready(struct mii_bus *bus, int sw_addr)
int i;
for (i = 0; i < 16; i++) {
- ret = mv88e6xxx_mdiobus_read(bus, sw_addr, SMI_CMD);
+ ret = mdiobus_read_nested(bus, sw_addr, SMI_CMD);
if (ret < 0)
return ret;
@@ -84,7 +56,7 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
int ret;
if (sw_addr == 0)
- return mv88e6xxx_mdiobus_read(bus, addr, reg);
+ return mdiobus_read_nested(bus, addr, reg);
/* Wait for the bus to become free. */
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
@@ -92,8 +64,8 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
return ret;
/* Transmit the read command. */
- ret = mv88e6xxx_mdiobus_write(bus, sw_addr, SMI_CMD,
- SMI_CMD_OP_22_READ | (addr << 5) | reg);
+ ret = mdiobus_write_nested(bus, sw_addr, SMI_CMD,
+ SMI_CMD_OP_22_READ | (addr << 5) | reg);
if (ret < 0)
return ret;
@@ -103,7 +75,7 @@ int __mv88e6xxx_reg_read(struct mii_bus *bus, int sw_addr, int addr, int reg)
return ret;
/* Read the data. */
- ret = mv88e6xxx_mdiobus_read(bus, sw_addr, SMI_DATA);
+ ret = mdiobus_read_nested(bus, sw_addr, SMI_DATA);
if (ret < 0)
return ret;
@@ -147,7 +119,7 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
int ret;
if (sw_addr == 0)
- return mv88e6xxx_mdiobus_write(bus, addr, reg, val);
+ return mdiobus_write_nested(bus, addr, reg, val);
/* Wait for the bus to become free. */
ret = mv88e6xxx_reg_wait_ready(bus, sw_addr);
@@ -155,13 +127,13 @@ int __mv88e6xxx_reg_write(struct mii_bus *bus, int sw_addr, int addr,
return ret;
/* Transmit the data to write. */
- ret = mv88e6xxx_mdiobus_write(bus, sw_addr, SMI_DATA, val);
+ ret = mdiobus_write_nested(bus, sw_addr, SMI_DATA, val);
if (ret < 0)
return ret;
/* Transmit the write command. */
- ret = mv88e6xxx_mdiobus_write(bus, sw_addr, SMI_CMD,
- SMI_CMD_OP_22_WRITE | (addr << 5) | reg);
+ ret = mdiobus_write_nested(bus, sw_addr, SMI_CMD,
+ SMI_CMD_OP_22_WRITE | (addr << 5) | reg);
if (ret < 0)
return ret;
Make the mv88e6xxx driver use the previously introduced nested variants of mdiobus_read/write functions. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> --- drivers/net/dsa/mv88e6xxx.c | 46 +++++++++------------------------------------ 1 file changed, 9 insertions(+), 37 deletions(-)