diff mbox

[PULL,02/13] target-arm: Break the TB after ISB to execute self-modified code correctly

Message ID 1445003887-14475-3-git-send-email-peter.maydell@linaro.org
State New
Headers show

Commit Message

Peter Maydell Oct. 16, 2015, 1:57 p.m. UTC 
From: Sergey Sorokin <afarallax@yandex.ru>

If any store instruction writes the code inside the same TB
after this store insn, the execution of the TB must be stopped
to execute new code correctly.
As described in ARMv8 manual D3.4.6 self-modifying code must do an
IC invalidation to be valid, and an ISB after it. So it's enough to end
the TB after ISB instruction on the code translation.
Also this TB break is necessary to take any pending interrupts immediately
after an ISB (as required by ARMv8 ARM D1.14.4).

Signed-off-by: Sergey Sorokin <afarallax@yandex.ru>
[PMM: tweaked commit message and comments slightly]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/helper.c        |  6 +++++-
 target-arm/translate-a64.c |  8 +++++++-
 target-arm/translate.c     | 17 +++++++++++++++--
 3 files changed, 27 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/target-arm/helper.c b/target-arm/helper.c
index 584f6df..b498670 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -657,8 +657,12 @@  static const ARMCPRegInfo v6_cp_reginfo[] = {
     { .name = "MVA_prefetch",
       .cp = 15, .crn = 7, .crm = 13, .opc1 = 0, .opc2 = 1,
       .access = PL1_W, .type = ARM_CP_NOP },
+    /* We need to break the TB after ISB to execute self-modifying code
+     * correctly and also to take any pending interrupts immediately.
+     * So use arm_cp_write_ignore() function instead of ARM_CP_NOP flag.
+     */
     { .name = "ISB", .cp = 15, .crn = 7, .crm = 5, .opc1 = 0, .opc2 = 4,
-      .access = PL0_W, .type = ARM_CP_NOP },
+      .access = PL0_W, .type = ARM_CP_NO_RAW, .writefn = arm_cp_write_ignore },
     { .name = "DSB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 4,
       .access = PL0_W, .type = ARM_CP_NOP },
     { .name = "DMB", .cp = 15, .crn = 7, .crm = 10, .opc1 = 0, .opc2 = 5,
diff --git a/target-arm/translate-a64.c b/target-arm/translate-a64.c
index e65e309..a4580c0 100644
--- a/target-arm/translate-a64.c
+++ b/target-arm/translate-a64.c
@@ -1230,9 +1230,15 @@  static void handle_sync(DisasContext *s, uint32_t insn,
         return;
     case 4: /* DSB */
     case 5: /* DMB */
-    case 6: /* ISB */
         /* We don't emulate caches so barriers are no-ops */
         return;
+    case 6: /* ISB */
+        /* We need to break the TB after this insn to execute
+         * a self-modified code correctly and also to take
+         * any pending interrupts immediately.
+         */
+        s->is_jmp = DISAS_UPDATE;
+        return;
     default:
         unallocated_encoding(s);
         return;
diff --git a/target-arm/translate.c b/target-arm/translate.c
index 22c3587..1273000 100644
--- a/target-arm/translate.c
+++ b/target-arm/translate.c
@@ -7720,10 +7720,16 @@  static void disas_arm_insn(DisasContext *s, unsigned int insn)
                 return;
             case 4: /* dsb */
             case 5: /* dmb */
-            case 6: /* isb */
                 ARCH(7);
                 /* We don't emulate caches so these are a no-op.  */
                 return;
+            case 6: /* isb */
+                /* We need to break the TB after this insn to execute
+                 * self-modifying code correctly and also to take
+                 * any pending interrupts immediately.
+                 */
+                gen_lookup_tb(s);
+                return;
             default:
                 goto illegal_op;
             }
@@ -10030,9 +10036,16 @@  static int disas_thumb2_insn(CPUARMState *env, DisasContext *s, uint16_t insn_hw
                             break;
                         case 4: /* dsb */
                         case 5: /* dmb */
-                        case 6: /* isb */
                             /* These execute as NOPs.  */
                             break;
+                        case 6: /* isb */
+                            /* We need to break the TB after this insn
+                             * to execute self-modifying code correctly
+                             * and also to take any pending interrupts
+                             * immediately.
+                             */
+                            gen_lookup_tb(s);
+                            break;
                         default:
                             goto illegal_op;
                         }