| Message ID | 1444667535-16948-2-git-send-email-leo.yan@linaro.org |
|---|---|
| State | Superseded, archived |
| Headers | show |
On Mon, Oct 12, 2015 at 10:02 PM, Leo Yan <leo.yan@linaro.org> wrote: > + > +Mailbox Device Node: > +==================== > + > +Required properties: > +-------------------- > +- compatible: Shall be "hisilicon,hi6220-mbox" > +- reg: Contains the mailbox register address range (base > + address and length); the first item is for IPC > + registers, the second item is shared buffer for > + slots. > Is the shared-buffer a part of mailbox controller or just regular memory that could be used for purposes other than mailbox also? If latter, please remove it from here. > +Mailbox client > +=============== > + > +"mboxes" and the optional "mbox-names" (please see > +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value > +of the mboxes property should contain a phandle to the mailbox controller > +device node and second argument is the channel index. It must be 0 (hardware > +support only one channel). > sorry, what must be 0? You have MBOX_CHAN_MAX and MBOX_CHAN_NUM as 32 and 2 in the driver. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi Jassi, Thanks for review. On Fri, Oct 16, 2015 at 10:26:48AM +0530, Jassi Brar wrote: > On Mon, Oct 12, 2015 at 10:02 PM, Leo Yan <leo.yan@linaro.org> wrote: > > > + > > +Mailbox Device Node: > > +==================== > > + > > +Required properties: > > +-------------------- > > +- compatible: Shall be "hisilicon,hi6220-mbox" > > +- reg: Contains the mailbox register address range (base > > + address and length); the first item is for IPC > > + registers, the second item is shared buffer for > > + slots. > > > Is the shared-buffer a part of mailbox controller or just regular > memory that could be used for purposes other than mailbox also? If > latter, please remove it from here. The shared-buffer is part of mailbox controller, this region cannot be dynamically allocated for other purpose; it's hardcode by MCU firmware. > > +Mailbox client > > +=============== > > + > > +"mboxes" and the optional "mbox-names" (please see > > +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value > > +of the mboxes property should contain a phandle to the mailbox controller > > +device node and second argument is the channel index. It must be 0 (hardware > > +support only one channel). > > > sorry, what must be 0? You have MBOX_CHAN_MAX and MBOX_CHAN_NUM as 32 > and 2 in the driver. Will fix it. Thanks, Leo Yan -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt new file mode 100644 index 0000000..3dfb0b0 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt @@ -0,0 +1,57 @@ +Hisilicon Hi6220 Mailbox Driver +=============================== + +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel +is unidirectional with a maximum message size of 8 words. I/O is +performed using register access (there is no DMA) and the cell +raises an interrupt when messages are received. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "hisilicon,hi6220-mbox" +- reg: Contains the mailbox register address range (base + address and length); the first item is for IPC + registers, the second item is shared buffer for + slots. +- #mbox-cells Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be 1. +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the SoCs use. + +Example: +-------- + + mailbox: mailbox@F7510000 { + #mbox-cells = <1>; + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xF7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06DFF800 0x0 0x0800>; /* Mailbox */ + interrupt-parent = <&gic>; + interrupts = <0 94 4>; + }; + + +Mailbox client +=============== + +"mboxes" and the optional "mbox-names" (please see +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value +of the mboxes property should contain a phandle to the mailbox controller +device node and second argument is the channel index. It must be 0 (hardware +support only one channel). The equivalent "mbox-names" property value can be +used to give a name to the communication channel to be used by the client user. + +Example: +-------- + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx"; + mboxes = <&mailbox 1>; + };
Document the new compatible for Hisilicon Hi6220 mailbox driver. Signed-off-by: Leo Yan <leo.yan@linaro.org> --- .../bindings/mailbox/hisilicon,hi6220-mailbox.txt | 57 ++++++++++++++++++++++ 1 file changed, 57 insertions(+) create mode 100644 Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt