| Message ID | 1444413352-24529-4-git-send-email-merker@debian.org |
|---|---|
| State | Superseded, archived |
| Headers | show |
> -----Original Message----- > From: linux-input-owner@vger.kernel.org [mailto:linux-input-owner@vger.kernel.org] On Behalf Of Karsten Merker > Sent: 09 October, 2015 20:56 > To: Bastien Nocera; Dmitry Torokhov; Tirdea, Irina; Aleksei Mamlin; linux-input@vger.kernel.org; Ian Campbell > Cc: devicetree@vger.kernel.org; linux-kernel@vger.kernel.org; Chen-Yu Tsai; Karsten Merker > Subject: [PATCH RFC V2 3/3] Input: goodix - update dt bindings documentation (axis swapping/inversion) > > The goodix touchscreen driver has gained support for the > optional touchscreen-inverted-x, touchscreen-inverted-y > and touchscreen-swapped-x-y properties as described in > Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt. > > Document these properties in the goodix bindings description. > > Signed-off-by: Karsten Merker <merker@debian.org> Reviewed-by: Irina Tirdea <irina.tirdea@intel.com> > --- > Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > index 4db3393..4ecd0e1 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt > @@ -14,6 +14,7 @@ Required properties: > - interrupts : Interrupt to which the chip is connected > - irq-gpio : GPIO pin used for IRQ > - reset-gpio : GPIO pin used for reset > + > Optional properties: > > - esd-recovery-timeout-ms : ESD poll time (in milli seconds) for the driver to > @@ -21,6 +22,11 @@ Optional properties: > device. ESD is disabled if this property is not set > or is set to 0. > > + - touchscreen-inverted-x : X axis is inverted (boolean) > + - touchscreen-inverted-y : Y axis is inverted (boolean) > + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) > + (swapping is done after inverting the axis) > + > Example: > > i2c@00000000 { > -- > 2.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-input" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index 4db3393..4ecd0e1 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -14,6 +14,7 @@ Required properties: - interrupts : Interrupt to which the chip is connected - irq-gpio : GPIO pin used for IRQ - reset-gpio : GPIO pin used for reset + Optional properties: - esd-recovery-timeout-ms : ESD poll time (in milli seconds) for the driver to @@ -21,6 +22,11 @@ Optional properties: device. ESD is disabled if this property is not set or is set to 0. + - touchscreen-inverted-x : X axis is inverted (boolean) + - touchscreen-inverted-y : Y axis is inverted (boolean) + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) + (swapping is done after inverting the axis) + Example: i2c@00000000 {
The goodix touchscreen driver has gained support for the optional touchscreen-inverted-x, touchscreen-inverted-y and touchscreen-swapped-x-y properties as described in Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt. Document these properties in the goodix bindings description. Signed-off-by: Karsten Merker <merker@debian.org> --- Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++++++ 1 file changed, 6 insertions(+)