| Message ID | 1444311079-2892-2-git-send-email-sjoerd.simons@collabora.co.uk |
|---|---|
| State | Under Review, archived |
| Headers | show |
On Thu, Oct 8, 2015 at 8:31 AM, Sjoerd Simons <sjoerd.simons@collabora.co.uk> wrote: > Add devicetree bindings for the spdif tranceiver found on > found on rk3066, rk3188 and rk3288 SoCs > > Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> > > --- > > Changes in v4: > - Require rockchip,grf on RK3288 as the 8 channel solution has to be > selected on that SoC > - Make the compatibility string one of a known list rather then > requiring a precise list of options. > - Change the clock names to hclk and mclk instead of spdif_hclk and > spdif_mclk to better match the implementation and data sheets. > > Changes in v3: None > Changes in v2: None > > .../devicetree/bindings/sound/rockchip-spdif.txt | 44 ++++++++++++++++++++++ > 1 file changed, 44 insertions(+) > create mode 100644 Documentation/devicetree/bindings/sound/rockchip-spdif.txt > > diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt > new file mode 100644 > index 0000000..33dd82c > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt > @@ -0,0 +1,44 @@ > +* Rockchip SPDIF transceiver > + > +The S/PDIF audio block is a stereo transceiver that allows the > +processor to receive and transmit digital audio via an coaxial cable or > +a fibre cable. > + > +Required properties: > + > +- compatible: should be one of the following: > + - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or > + "rockchip,rk3066-spdif" > +- reg: physical base address of the controller and length of memory mapped > + region. > +- interrupts: should contain the SPDIF interrupt. > +- #address-cells: should be 1. > +- #size-cells: should be 0. Why do you need these? Are you going to have sub nodes? > +- dmas: DMA specifiers for tx dma. See the DMA client binding, > + Documentation/devicetree/bindings/dma/dma.txt > +- dma-names: should be "tx" > +- clocks: a list of phandle + clock-specifier pairs, one for each entry > + in clock-names. > +- clock-names: should contain following: > + - "hclk": clock for SPDIF controller > + - "mclk" : clock for SPDIF bus > + > +Required properties on RK3288: > + - rockchip,grf: the phandle of the syscon node for the general register > + file (GRF) > + > +Example for the rk3188 SPDIF controller: > + > +spdif: spdif@0x1011e000 { > + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; > + reg = <0x1011e000 0x2000>; > + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <1>; > + #size-cells = <0>; > + dmas = <&dmac1_s 8>; > + dma-names = "tx"; > + clock-names = "hclk", "mclk"; > + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; > + status = "disabled"; > + #sound-dai-cells = <0>; > +}; > -- > 2.6.1 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Hey Rob, On Thu, 2015-10-08 at 11:50 -0500, Rob Herring wrote: > On Thu, Oct 8, 2015 at 8:31 AM, Sjoerd Simons > <sjoerd.simons@collabora.co.uk> wrote: > > Add devicetree bindings for the spdif tranceiver found on > > found on rk3066, rk3188 and rk3288 SoCs > > > > Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> > > > > --- > > > > Changes in v4: > > - Require rockchip,grf on RK3288 as the 8 channel solution has to > > be > > selected on that SoC > > - Make the compatibility string one of a known list rather then > > requiring a precise list of options. > > - Change the clock names to hclk and mclk instead of spdif_hclk and > > spdif_mclk to better match the implementation and data sheets. > > > > Changes in v3: None > > Changes in v2: None > > > > .../devicetree/bindings/sound/rockchip-spdif.txt | 44 > > ++++++++++++++++++++++ > > 1 file changed, 44 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/sound/rockchip-spdif.txt > > > > diff --git a/Documentation/devicetree/bindings/sound/rockchip > > -spdif.txt b/Documentation/devicetree/bindings/sound/rockchip > > -spdif.txt > > new file mode 100644 > > index 0000000..33dd82c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt > > @@ -0,0 +1,44 @@ > > +* Rockchip SPDIF transceiver > > + > > +The S/PDIF audio block is a stereo transceiver that allows the > > +processor to receive and transmit digital audio via an coaxial > > cable or > > +a fibre cable. > > + > > +Required properties: > > + > > +- compatible: should be one of the following: > > + - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or > > + "rockchip,rk3066-spdif" > > +- reg: physical base address of the controller and length of > > memory mapped > > + region. > > +- interrupts: should contain the SPDIF interrupt. > > > +- #address-cells: should be 1. > > +- #size-cells: should be 0. > > Why do you need these? Are you going to have sub nodes? Oh good spot, it looks like I indeed don't need this. (for reference, this came from the rockchip i2s' drivers device-tree documentation and i mindlessly left it in). Thanks!,
diff --git a/Documentation/devicetree/bindings/sound/rockchip-spdif.txt b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt new file mode 100644 index 0000000..33dd82c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-spdif.txt @@ -0,0 +1,44 @@ +* Rockchip SPDIF transceiver + +The S/PDIF audio block is a stereo transceiver that allows the +processor to receive and transmit digital audio via an coaxial cable or +a fibre cable. + +Required properties: + +- compatible: should be one of the following: + - "rockchip,rk3288-spdif", "rockchip,rk3188-spdif" or + "rockchip,rk3066-spdif" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the SPDIF interrupt. +- #address-cells: should be 1. +- #size-cells: should be 0. +- dmas: DMA specifiers for tx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should be "tx" +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: should contain following: + - "hclk": clock for SPDIF controller + - "mclk" : clock for SPDIF bus + +Required properties on RK3288: + - rockchip,grf: the phandle of the syscon node for the general register + file (GRF) + +Example for the rk3188 SPDIF controller: + +spdif: spdif@0x1011e000 { + compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif"; + reg = <0x1011e000 0x2000>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&dmac1_s 8>; + dma-names = "tx"; + clock-names = "hclk", "mclk"; + clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>; + status = "disabled"; + #sound-dai-cells = <0>; +};
Add devicetree bindings for the spdif tranceiver found on found on rk3066, rk3188 and rk3288 SoCs Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> --- Changes in v4: - Require rockchip,grf on RK3288 as the 8 channel solution has to be selected on that SoC - Make the compatibility string one of a known list rather then requiring a precise list of options. - Change the clock names to hclk and mclk instead of spdif_hclk and spdif_mclk to better match the implementation and data sheets. Changes in v3: None Changes in v2: None .../devicetree/bindings/sound/rockchip-spdif.txt | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/rockchip-spdif.txt