diff mbox

[2/5] Documentation: add the binding file for Freescale imx7d ADC driver

Message ID 1444301948-21721-2-git-send-email-haibo.chen@freescale.com
State Not Applicable, archived
Headers show

Commit Message

Haibo Chen Oct. 8, 2015, 10:59 a.m. UTC 
The patch adds the binding file for Freescale imx7d ADC driver.

Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
---
 .../devicetree/bindings/iio/adc/imx7d-adc.txt      | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt

Comments

Rob Herring Oct. 9, 2015, 12:59 p.m. UTC | #1 
On Thu, Oct 8, 2015 at 5:59 AM, Haibo Chen <haibo.chen@freescale.com> wrote:
> The patch adds the binding file for Freescale imx7d ADC driver.
>
> Signed-off-by: Haibo Chen <haibo.chen@freescale.com>

Acked-by: Rob Herring <robh@kernel.org>

> ---
>  .../devicetree/bindings/iio/adc/imx7d-adc.txt      | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> new file mode 100644
> index 0000000..6b21fd27
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> @@ -0,0 +1,26 @@
> +Freescale imx7d ADC bindings
> +
> +The devicetree bingdings are for the nwe ADC driver written for
> +imx7d SoC.
> +
> +Required properties:
> +- compatible: Should be "fsl,imx7d-adc"
> +- reg: Offset and length of the register set for the ADC device
> +- interrupts: The interrupt number for the ADC device
> +- clocks: The root clock of the ADC controller
> +- clock-names: Must contain "adc", matching entry in the clocks property
> +- vref-supply: The regulator supply ADC reference voltage
> +
> +Optional properties:
> +- num-channels: the number of channels used
> +
> +Example:
> +adc1: adc@30610000 {
> +       compatible = "fsl,imx7d-adc";
> +       reg = <0x30610000 0x10000>;
> +       interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +       clocks = <&clks IMX7D_ADC_ROOT_CLK>;
> +       clock-names = "adc";
> +       num-channels = <4>;
> +       vref-supply = <&reg_vcc_3v3_mcu>;
> +};
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Cameron Oct. 11, 2015, 1:31 p.m. UTC | #2 
On 08/10/15 11:59, Haibo Chen wrote:
> The patch adds the binding file for Freescale imx7d ADC driver.
> 
> Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Couple of trivial typos..  otherwise fine.
> ---
>  .../devicetree/bindings/iio/adc/imx7d-adc.txt      | 26 ++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> new file mode 100644
> index 0000000..6b21fd27
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> @@ -0,0 +1,26 @@
> +Freescale imx7d ADC bindings
> +
> +The devicetree bingdings are for the nwe ADC driver written for
> +imx7d SoC.
bindings and new
> +
> +Required properties:
> +- compatible: Should be "fsl,imx7d-adc"
> +- reg: Offset and length of the register set for the ADC device
> +- interrupts: The interrupt number for the ADC device
> +- clocks: The root clock of the ADC controller
> +- clock-names: Must contain "adc", matching entry in the clocks property
> +- vref-supply: The regulator supply ADC reference voltage
> +
> +Optional properties:
> +- num-channels: the number of channels used
> +
> +Example:
> +adc1: adc@30610000 {
> +	compatible = "fsl,imx7d-adc";
> +	reg = <0x30610000 0x10000>;
> +	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
> +	clock-names = "adc";
> +	num-channels = <4>;
> +	vref-supply = <&reg_vcc_3v3_mcu>;
> +};
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Jonathan Cameron Oct. 11, 2015, 1:34 p.m. UTC | #3 
On 11/10/15 14:31, Jonathan Cameron wrote:
> On 08/10/15 11:59, Haibo Chen wrote:
>> The patch adds the binding file for Freescale imx7d ADC driver.
>>
>> Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
> Couple of trivial typos..  otherwise fine.
>> ---
>>  .../devicetree/bindings/iio/adc/imx7d-adc.txt      | 26 ++++++++++++++++++++++
>>  1 file changed, 26 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
>> new file mode 100644
>> index 0000000..6b21fd27
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
>> @@ -0,0 +1,26 @@
>> +Freescale imx7d ADC bindings
>> +
>> +The devicetree bingdings are for the nwe ADC driver written for
>> +imx7d SoC.
> bindings and new
Actually I'd drop the new.  Makes sense in a patch comment, but
in the docs it'll rapidly stop being new.

>> +
>> +Required properties:
>> +- compatible: Should be "fsl,imx7d-adc"
>> +- reg: Offset and length of the register set for the ADC device
>> +- interrupts: The interrupt number for the ADC device
>> +- clocks: The root clock of the ADC controller
>> +- clock-names: Must contain "adc", matching entry in the clocks property
>> +- vref-supply: The regulator supply ADC reference voltage
>> +
>> +Optional properties:
>> +- num-channels: the number of channels used
>> +
>> +Example:
>> +adc1: adc@30610000 {
>> +	compatible = "fsl,imx7d-adc";
>> +	reg = <0x30610000 0x10000>;
>> +	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
>> +	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
>> +	clock-names = "adc";
>> +	num-channels = <4>;
>> +	vref-supply = <&reg_vcc_3v3_mcu>;
>> +};
>>
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
new file mode 100644
index 0000000..6b21fd27
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
@@ -0,0 +1,26 @@ 
+Freescale imx7d ADC bindings
+
+The devicetree bingdings are for the nwe ADC driver written for
+imx7d SoC.
+
+Required properties:
+- compatible: Should be "fsl,imx7d-adc"
+- reg: Offset and length of the register set for the ADC device
+- interrupts: The interrupt number for the ADC device
+- clocks: The root clock of the ADC controller
+- clock-names: Must contain "adc", matching entry in the clocks property
+- vref-supply: The regulator supply ADC reference voltage
+
+Optional properties:
+- num-channels: the number of channels used
+
+Example:
+adc1: adc@30610000 {
+	compatible = "fsl,imx7d-adc";
+	reg = <0x30610000 0x10000>;
+	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
+	clock-names = "adc";
+	num-channels = <4>;
+	vref-supply = <&reg_vcc_3v3_mcu>;
+};