diff mbox

[v5,05/34] cxlflash: Fix data corruption when vLUN used over multiple cards

Message ID 1443714908-13176-1-git-send-email-mrochs@linux.vnet.ibm.com (mailing list archive)
State Not Applicable
Headers show

Commit Message

Matthew R. Ochs Oct. 1, 2015, 3:55 p.m. UTC 
If the same virtual LUN is accessed over multiple cards, only accesses
made over the first card will be valid. Accesses made over the second
card will go to the wrong LUN causing data corruption.

This is because the global LUN's mode word was being used to determine
whether the LUN table for that card needs to be programmed. The mode
word would be setup by the first card, causing the LUN table for the
second card to not be programmed.

By unconditionally initializing the LUN table (not depending on the
mode word), the problem is avoided.

Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
---
 drivers/scsi/cxlflash/vlun.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

Comments

Tomas Henzl Oct. 2, 2015, 1:03 p.m. UTC | #1 
On 1.10.2015 17:55, Matthew R. Ochs wrote:
> If the same virtual LUN is accessed over multiple cards, only accesses
> made over the first card will be valid. Accesses made over the second
> card will go to the wrong LUN causing data corruption.
>
> This is because the global LUN's mode word was being used to determine
> whether the LUN table for that card needs to be programmed. The mode
> word would be setup by the first card, causing the LUN table for the
> second card to not be programmed.
>
> By unconditionally initializing the LUN table (not depending on the
> mode word), the problem is avoided.
>
> Signed-off-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
> Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com>
> Reviewed-by: Brian King <brking@linux.vnet.ibm.com>

Reviewed-by: Tomas Henzl <thenzl@redhat.com>

Tomas
diff mbox

Patch

diff --git a/drivers/scsi/cxlflash/vlun.c b/drivers/scsi/cxlflash/vlun.c
index 68994c4..96b074f 100644
--- a/drivers/scsi/cxlflash/vlun.c
+++ b/drivers/scsi/cxlflash/vlun.c
@@ -915,16 +915,9 @@  int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg)
 
 	pr_debug("%s: ctxid=%llu ls=0x%llx\n", __func__, ctxid, lun_size);
 
+	/* Setup the LUNs block allocator on first call */
 	mutex_lock(&gli->mutex);
 	if (gli->mode == MODE_NONE) {
-		/* Setup the LUN table and block allocator on first call */
-		rc = init_luntable(cfg, lli);
-		if (rc) {
-			dev_err(dev, "%s: call to init_luntable failed "
-				"rc=%d!\n", __func__, rc);
-			goto err0;
-		}
-
 		rc = init_vlun(lli);
 		if (rc) {
 			dev_err(dev, "%s: call to init_vlun failed rc=%d!\n",
@@ -942,6 +935,13 @@  int cxlflash_disk_virtual_open(struct scsi_device *sdev, void *arg)
 	}
 	mutex_unlock(&gli->mutex);
 
+	rc = init_luntable(cfg, lli);
+	if (rc) {
+		dev_err(dev, "%s: call to init_luntable failed rc=%d!\n",
+			__func__, rc);
+		goto err1;
+	}
+
 	ctxi = get_context(cfg, rctxid, lli, 0);
 	if (unlikely(!ctxi)) {
 		dev_err(dev, "%s: Bad context! (%llu)\n", __func__, ctxid);