diff mbox

[U-Boot,5/6] am437x: Add am437x_gp_evm_defconfig using CONFIG_DM

Message ID 1443437272-1939-6-git-send-email-mugunthanvnm@ti.com
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Mugunthan V N Sept. 28, 2015, 10:47 a.m. UTC 
Import various DT files for am4372, an43xx pinctrl and
am437x-gp-evm from Linux Kernel v4.2
Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
and DM_MMC.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 arch/arm/dts/Makefile                |   1 +
 arch/arm/dts/am4372.dtsi             | 999 +++++++++++++++++++++++++++++++++++
 arch/arm/dts/am437x-gp-evm.dts       | 797 ++++++++++++++++++++++++++++
 arch/arm/dts/am43xx-clocks.dtsi      | 757 ++++++++++++++++++++++++++
 configs/am437x_gp_evm_defconfig      |  17 +
 include/dt-bindings/pinctrl/am43xx.h |  33 ++
 include/dt-bindings/pwm/pwm.h        |  14 +
 7 files changed, 2618 insertions(+)
 create mode 100644 arch/arm/dts/am4372.dtsi
 create mode 100644 arch/arm/dts/am437x-gp-evm.dts
 create mode 100644 arch/arm/dts/am43xx-clocks.dtsi
 create mode 100644 configs/am437x_gp_evm_defconfig
 create mode 100644 include/dt-bindings/pinctrl/am43xx.h
 create mode 100644 include/dt-bindings/pwm/pwm.h

Comments

Lokesh Vutla Sept. 28, 2015, 11:08 a.m. UTC | #1 
On Monday 28 September 2015 04:17 PM, Mugunthan V N wrote:
> Import various DT files for am4372, an43xx pinctrl and
> am437x-gp-evm from Linux Kernel v4.2
> Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
> and DM_MMC.

Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

Thanks and regards,
Lokesh


> 
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
> ---
>  arch/arm/dts/Makefile                |   1 +
>  arch/arm/dts/am4372.dtsi             | 999 +++++++++++++++++++++++++++++++++++
>  arch/arm/dts/am437x-gp-evm.dts       | 797 ++++++++++++++++++++++++++++
>  arch/arm/dts/am43xx-clocks.dtsi      | 757 ++++++++++++++++++++++++++
>  configs/am437x_gp_evm_defconfig      |  17 +
>  include/dt-bindings/pinctrl/am43xx.h |  33 ++
>  include/dt-bindings/pwm/pwm.h        |  14 +
>  7 files changed, 2618 insertions(+)
>  create mode 100644 arch/arm/dts/am4372.dtsi
>  create mode 100644 arch/arm/dts/am437x-gp-evm.dts
>  create mode 100644 arch/arm/dts/am43xx-clocks.dtsi
>  create mode 100644 configs/am437x_gp_evm_defconfig
>  create mode 100644 include/dt-bindings/pinctrl/am43xx.h
>  create mode 100644 include/dt-bindings/pwm/pwm.h
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 5f10243..716b5b7 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
>  	zynq-zc770-xm012.dtb \
>  	zynq-zc770-xm013.dtb
>  dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
> +dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb
>  
>  dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
>  	socfpga_arria5_socdk.dtb			\
> diff --git a/arch/arm/dts/am4372.dtsi b/arch/arm/dts/am4372.dtsi
> new file mode 100644
> index 0000000..ade28c7
> --- /dev/null
> +++ b/arch/arm/dts/am4372.dtsi
> @@ -0,0 +1,999 @@
> +/*
> + * Device Tree Source for AM4372 SoC
> + *
> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This file is licensed under the terms of the GNU General Public License
> + * version 2.  This program is licensed "as is" without any warranty of any
> + * kind, whether express or implied.
> + */
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +#include "skeleton.dtsi"
> +
> +/ {
> +	compatible = "ti,am4372", "ti,am43";
> +	interrupt-parent = <&wakeupgen>;
> +
> +
> +	aliases {
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +		i2c2 = &i2c2;
> +		serial0 = &uart0;
> +		ethernet0 = &cpsw_emac0;
> +		ethernet1 = &cpsw_emac1;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		cpu: cpu@0 {
> +			compatible = "arm,cortex-a9";
> +			device_type = "cpu";
> +			reg = <0>;
> +
> +			clocks = <&dpll_mpu_ck>;
> +			clock-names = "cpu";
> +
> +			clock-latency = <300000>; /* From omap-cpufreq driver */
> +		};
> +	};
> +
> +	gic: interrupt-controller@48241000 {
> +		compatible = "arm,cortex-a9-gic";
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		reg = <0x48241000 0x1000>,
> +		      <0x48240100 0x0100>;
> +		interrupt-parent = <&gic>;
> +	};
> +
> +	wakeupgen: interrupt-controller@48281000 {
> +		compatible = "ti,omap4-wugen-mpu";
> +		interrupt-controller;
> +		#interrupt-cells = <3>;
> +		reg = <0x48281000 0x1000>;
> +		interrupt-parent = <&gic>;
> +	};
> +
> +	l2-cache-controller@48242000 {
> +		compatible = "arm,pl310-cache";
> +		reg = <0x48242000 0x1000>;
> +		cache-unified;
> +		cache-level = <2>;
> +	};
> +
> +	ocp {
> +		compatible = "ti,am4372-l3-noc", "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +		ti,hwmods = "l3_main";
> +		reg = <0x44000000 0x400000
> +		       0x44800000 0x400000>;
> +		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> +
> +		l4_wkup: l4_wkup@44c00000 {
> +			compatible = "ti,am4-l4-wkup", "simple-bus";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges = <0 0x44c00000 0x287000>;
> +
> +			prcm: prcm@1f0000 {
> +				compatible = "ti,am4-prcm";
> +				reg = <0x1f0000 0x11000>;
> +
> +				prcm_clocks: clocks {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +				};
> +
> +				prcm_clockdomains: clockdomains {
> +				};
> +			};
> +
> +			scm: scm@210000 {
> +				compatible = "ti,am4-scm", "simple-bus";
> +				reg = <0x210000 0x4000>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				ranges = <0 0x210000 0x4000>;
> +
> +				am43xx_pinmux: pinmux@800 {
> +					compatible = "ti,am437-padconf",
> +						     "pinctrl-single";
> +					reg = <0x800 0x31c>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					#interrupt-cells = <1>;
> +					interrupt-controller;
> +					pinctrl-single,register-width = <32>;
> +					pinctrl-single,function-mask = <0xffffffff>;
> +				};
> +
> +				scm_conf: scm_conf@0 {
> +					compatible = "syscon";
> +					reg = <0x0 0x800>;
> +					#address-cells = <1>;
> +					#size-cells = <1>;
> +
> +					scm_clocks: clocks {
> +						#address-cells = <1>;
> +						#size-cells = <0>;
> +					};
> +				};
> +
> +				scm_clockdomains: clockdomains {
> +				};
> +			};
> +		};
> +
> +		emif: emif@4c000000 {
> +			compatible = "ti,emif-am4372";
> +			reg = <0x4c000000 0x1000000>;
> +			ti,hwmods = "emif";
> +		};
> +
> +		edma: edma@49000000 {
> +			compatible = "ti,edma3";
> +			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> +			reg =	<0x49000000 0x10000>,
> +				<0x44e10f90 0x10>;
> +			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +			#dma-cells = <1>;
> +		};
> +
> +		uart0: serial@44e09000 {
> +			compatible = "ti,am4372-uart","ti,omap2-uart";
> +			reg = <0x44e09000 0x2000>;
> +			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "uart1";
> +		};
> +
> +		uart1: serial@48022000 {
> +			compatible = "ti,am4372-uart","ti,omap2-uart";
> +			reg = <0x48022000 0x2000>;
> +			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "uart2";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@48024000 {
> +			compatible = "ti,am4372-uart","ti,omap2-uart";
> +			reg = <0x48024000 0x2000>;
> +			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "uart3";
> +			status = "disabled";
> +		};
> +
> +		uart3: serial@481a6000 {
> +			compatible = "ti,am4372-uart","ti,omap2-uart";
> +			reg = <0x481a6000 0x2000>;
> +			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "uart4";
> +			status = "disabled";
> +		};
> +
> +		uart4: serial@481a8000 {
> +			compatible = "ti,am4372-uart","ti,omap2-uart";
> +			reg = <0x481a8000 0x2000>;
> +			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "uart5";
> +			status = "disabled";
> +		};
> +
> +		uart5: serial@481aa000 {
> +			compatible = "ti,am4372-uart","ti,omap2-uart";
> +			reg = <0x481aa000 0x2000>;
> +			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "uart6";
> +			status = "disabled";
> +		};
> +
> +		mailbox: mailbox@480C8000 {
> +			compatible = "ti,omap4-mailbox";
> +			reg = <0x480C8000 0x200>;
> +			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "mailbox";
> +			#mbox-cells = <1>;
> +			ti,mbox-num-users = <4>;
> +			ti,mbox-num-fifos = <8>;
> +			mbox_wkupm3: wkup_m3 {
> +				ti,mbox-tx = <0 0 0>;
> +				ti,mbox-rx = <0 0 3>;
> +			};
> +		};
> +
> +		timer1: timer@44e31000 {
> +			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
> +			reg = <0x44e31000 0x400>;
> +			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,timer-alwon;
> +			ti,hwmods = "timer1";
> +		};
> +
> +		timer2: timer@48040000  {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x48040000  0x400>;
> +			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "timer2";
> +		};
> +
> +		timer3: timer@48042000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x48042000 0x400>;
> +			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "timer3";
> +			status = "disabled";
> +		};
> +
> +		timer4: timer@48044000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x48044000 0x400>;
> +			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,timer-pwm;
> +			ti,hwmods = "timer4";
> +			status = "disabled";
> +		};
> +
> +		timer5: timer@48046000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x48046000 0x400>;
> +			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,timer-pwm;
> +			ti,hwmods = "timer5";
> +			status = "disabled";
> +		};
> +
> +		timer6: timer@48048000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x48048000 0x400>;
> +			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,timer-pwm;
> +			ti,hwmods = "timer6";
> +			status = "disabled";
> +		};
> +
> +		timer7: timer@4804a000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x4804a000 0x400>;
> +			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,timer-pwm;
> +			ti,hwmods = "timer7";
> +			status = "disabled";
> +		};
> +
> +		timer8: timer@481c1000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x481c1000 0x400>;
> +			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "timer8";
> +			status = "disabled";
> +		};
> +
> +		timer9: timer@4833d000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x4833d000 0x400>;
> +			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "timer9";
> +			status = "disabled";
> +		};
> +
> +		timer10: timer@4833f000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x4833f000 0x400>;
> +			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "timer10";
> +			status = "disabled";
> +		};
> +
> +		timer11: timer@48341000 {
> +			compatible = "ti,am4372-timer","ti,am335x-timer";
> +			reg = <0x48341000 0x400>;
> +			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "timer11";
> +			status = "disabled";
> +		};
> +
> +		counter32k: counter@44e86000 {
> +			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
> +			reg = <0x44e86000 0x40>;
> +			ti,hwmods = "counter_32k";
> +		};
> +
> +		rtc: rtc@44e3e000 {
> +			compatible = "ti,am4372-rtc","ti,da830-rtc";
> +			reg = <0x44e3e000 0x1000>;
> +			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
> +				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "rtc";
> +			status = "disabled";
> +		};
> +
> +		wdt: wdt@44e35000 {
> +			compatible = "ti,am4372-wdt","ti,omap3-wdt";
> +			reg = <0x44e35000 0x1000>;
> +			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "wd_timer2";
> +		};
> +
> +		gpio0: gpio@44e07000 {
> +			compatible = "ti,am4372-gpio","ti,omap4-gpio";
> +			reg = <0x44e07000 0x1000>;
> +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			ti,hwmods = "gpio1";
> +			status = "disabled";
> +		};
> +
> +		gpio1: gpio@4804c000 {
> +			compatible = "ti,am4372-gpio","ti,omap4-gpio";
> +			reg = <0x4804c000 0x1000>;
> +			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			ti,hwmods = "gpio2";
> +			status = "disabled";
> +		};
> +
> +		gpio2: gpio@481ac000 {
> +			compatible = "ti,am4372-gpio","ti,omap4-gpio";
> +			reg = <0x481ac000 0x1000>;
> +			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			ti,hwmods = "gpio3";
> +			status = "disabled";
> +		};
> +
> +		gpio3: gpio@481ae000 {
> +			compatible = "ti,am4372-gpio","ti,omap4-gpio";
> +			reg = <0x481ae000 0x1000>;
> +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			ti,hwmods = "gpio4";
> +			status = "disabled";
> +		};
> +
> +		gpio4: gpio@48320000 {
> +			compatible = "ti,am4372-gpio","ti,omap4-gpio";
> +			reg = <0x48320000 0x1000>;
> +			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			ti,hwmods = "gpio5";
> +			status = "disabled";
> +		};
> +
> +		gpio5: gpio@48322000 {
> +			compatible = "ti,am4372-gpio","ti,omap4-gpio";
> +			reg = <0x48322000 0x1000>;
> +			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			ti,hwmods = "gpio6";
> +			status = "disabled";
> +		};
> +
> +		hwspinlock: spinlock@480ca000 {
> +			compatible = "ti,omap4-hwspinlock";
> +			reg = <0x480ca000 0x1000>;
> +			ti,hwmods = "spinlock";
> +			#hwlock-cells = <1>;
> +		};
> +
> +		i2c0: i2c@44e0b000 {
> +			compatible = "ti,am4372-i2c","ti,omap4-i2c";
> +			reg = <0x44e0b000 0x1000>;
> +			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "i2c1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c@4802a000 {
> +			compatible = "ti,am4372-i2c","ti,omap4-i2c";
> +			reg = <0x4802a000 0x1000>;
> +			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "i2c2";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c@4819c000 {
> +			compatible = "ti,am4372-i2c","ti,omap4-i2c";
> +			reg = <0x4819c000 0x1000>;
> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "i2c3";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		spi0: spi@48030000 {
> +			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
> +			reg = <0x48030000 0x400>;
> +			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "spi0";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		mmc1: mmc@48060000 {
> +			compatible = "ti,omap4-hsmmc";
> +			reg = <0x48060000 0x1000>;
> +			ti,hwmods = "mmc1";
> +			ti,dual-volt;
> +			ti,needs-special-reset;
> +			dmas = <&edma 24
> +				&edma 25>;
> +			dma-names = "tx", "rx";
> +			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		mmc2: mmc@481d8000 {
> +			compatible = "ti,omap4-hsmmc";
> +			reg = <0x481d8000 0x1000>;
> +			ti,hwmods = "mmc2";
> +			ti,needs-special-reset;
> +			dmas = <&edma 2
> +				&edma 3>;
> +			dma-names = "tx", "rx";
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		mmc3: mmc@47810000 {
> +			compatible = "ti,omap4-hsmmc";
> +			reg = <0x47810000 0x1000>;
> +			ti,hwmods = "mmc3";
> +			ti,needs-special-reset;
> +			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		spi1: spi@481a0000 {
> +			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
> +			reg = <0x481a0000 0x400>;
> +			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "spi1";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		spi2: spi@481a2000 {
> +			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
> +			reg = <0x481a2000 0x400>;
> +			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "spi2";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		spi3: spi@481a4000 {
> +			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
> +			reg = <0x481a4000 0x400>;
> +			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "spi3";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		spi4: spi@48345000 {
> +			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
> +			reg = <0x48345000 0x400>;
> +			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "spi4";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		mac: ethernet@4a100000 {
> +			compatible = "ti,am4372-cpsw","ti,cpsw";
> +			reg = <0x4a100000 0x800
> +			       0x4a101200 0x100>;
> +			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
> +				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
> +				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
> +				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ti,hwmods = "cpgmac0";
> +			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
> +			clock-names = "fck", "cpts";
> +			status = "disabled";
> +			cpdma_channels = <8>;
> +			ale_entries = <1024>;
> +			bd_ram_size = <0x2000>;
> +			no_bd_ram = <0>;
> +			rx_descs = <64>;
> +			mac_control = <0x20>;
> +			slaves = <2>;
> +			active_slave = <0>;
> +			cpts_clock_mult = <0x80000000>;
> +			cpts_clock_shift = <29>;
> +			ranges;
> +
> +			davinci_mdio: mdio@4a101000 {
> +				compatible = "ti,am4372-mdio","ti,davinci_mdio";
> +				reg = <0x4a101000 0x100>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				ti,hwmods = "davinci_mdio";
> +				bus_freq = <1000000>;
> +				status = "disabled";
> +			};
> +
> +			cpsw_emac0: slave@4a100200 {
> +				/* Filled in by U-Boot */
> +				mac-address = [ 00 00 00 00 00 00 ];
> +			};
> +
> +			cpsw_emac1: slave@4a100300 {
> +				/* Filled in by U-Boot */
> +				mac-address = [ 00 00 00 00 00 00 ];
> +			};
> +
> +			phy_sel: cpsw-phy-sel@44e10650 {
> +				compatible = "ti,am43xx-cpsw-phy-sel";
> +				reg= <0x44e10650 0x4>;
> +				reg-names = "gmii-sel";
> +			};
> +		};
> +
> +		epwmss0: epwmss@48300000 {
> +			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
> +			reg = <0x48300000 0x10>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "epwmss0";
> +			status = "disabled";
> +
> +			ecap0: ecap@48300100 {
> +				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
> +				#pwm-cells = <3>;
> +				reg = <0x48300100 0x80>;
> +				ti,hwmods = "ecap0";
> +				status = "disabled";
> +			};
> +
> +			ehrpwm0: ehrpwm@48300200 {
> +				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> +				#pwm-cells = <3>;
> +				reg = <0x48300200 0x80>;
> +				ti,hwmods = "ehrpwm0";
> +				status = "disabled";
> +			};
> +		};
> +
> +		epwmss1: epwmss@48302000 {
> +			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
> +			reg = <0x48302000 0x10>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "epwmss1";
> +			status = "disabled";
> +
> +			ecap1: ecap@48302100 {
> +				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
> +				#pwm-cells = <3>;
> +				reg = <0x48302100 0x80>;
> +				ti,hwmods = "ecap1";
> +				status = "disabled";
> +			};
> +
> +			ehrpwm1: ehrpwm@48302200 {
> +				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> +				#pwm-cells = <3>;
> +				reg = <0x48302200 0x80>;
> +				ti,hwmods = "ehrpwm1";
> +				status = "disabled";
> +			};
> +		};
> +
> +		epwmss2: epwmss@48304000 {
> +			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
> +			reg = <0x48304000 0x10>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "epwmss2";
> +			status = "disabled";
> +
> +			ecap2: ecap@48304100 {
> +				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
> +				#pwm-cells = <3>;
> +				reg = <0x48304100 0x80>;
> +				ti,hwmods = "ecap2";
> +				status = "disabled";
> +			};
> +
> +			ehrpwm2: ehrpwm@48304200 {
> +				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> +				#pwm-cells = <3>;
> +				reg = <0x48304200 0x80>;
> +				ti,hwmods = "ehrpwm2";
> +				status = "disabled";
> +			};
> +		};
> +
> +		epwmss3: epwmss@48306000 {
> +			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
> +			reg = <0x48306000 0x10>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "epwmss3";
> +			status = "disabled";
> +
> +			ehrpwm3: ehrpwm@48306200 {
> +				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> +				#pwm-cells = <3>;
> +				reg = <0x48306200 0x80>;
> +				ti,hwmods = "ehrpwm3";
> +				status = "disabled";
> +			};
> +		};
> +
> +		epwmss4: epwmss@48308000 {
> +			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
> +			reg = <0x48308000 0x10>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "epwmss4";
> +			status = "disabled";
> +
> +			ehrpwm4: ehrpwm@48308200 {
> +				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> +				#pwm-cells = <3>;
> +				reg = <0x48308200 0x80>;
> +				ti,hwmods = "ehrpwm4";
> +				status = "disabled";
> +			};
> +		};
> +
> +		epwmss5: epwmss@4830a000 {
> +			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
> +			reg = <0x4830a000 0x10>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "epwmss5";
> +			status = "disabled";
> +
> +			ehrpwm5: ehrpwm@4830a200 {
> +				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
> +				#pwm-cells = <3>;
> +				reg = <0x4830a200 0x80>;
> +				ti,hwmods = "ehrpwm5";
> +				status = "disabled";
> +			};
> +		};
> +
> +		tscadc: tscadc@44e0d000 {
> +			compatible = "ti,am3359-tscadc";
> +			reg = <0x44e0d000 0x1000>;
> +			ti,hwmods = "adc_tsc";
> +			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&adc_tsc_fck>;
> +			clock-names = "fck";
> +			status = "disabled";
> +
> +			tsc {
> +				compatible = "ti,am3359-tsc";
> +			};
> +
> +			adc {
> +				#io-channel-cells = <1>;
> +				compatible = "ti,am3359-adc";
> +			};
> +
> +		};
> +
> +		sham: sham@53100000 {
> +			compatible = "ti,omap5-sham";
> +			ti,hwmods = "sham";
> +			reg = <0x53100000 0x300>;
> +			dmas = <&edma 36>;
> +			dma-names = "rx";
> +			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		aes: aes@53501000 {
> +			compatible = "ti,omap4-aes";
> +			ti,hwmods = "aes";
> +			reg = <0x53501000 0xa0>;
> +			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
> +			dmas = <&edma 6
> +				&edma 5>;
> +			dma-names = "tx", "rx";
> +		};
> +
> +		des: des@53701000 {
> +			compatible = "ti,omap4-des";
> +			ti,hwmods = "des";
> +			reg = <0x53701000 0xa0>;
> +			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> +			dmas = <&edma 34
> +				&edma 33>;
> +			dma-names = "tx", "rx";
> +		};
> +
> +		mcasp0: mcasp@48038000 {
> +			compatible = "ti,am33xx-mcasp-audio";
> +			ti,hwmods = "mcasp0";
> +			reg = <0x48038000 0x2000>,
> +			      <0x46000000 0x400000>;
> +			reg-names = "mpu", "dat";
> +			interrupts = <80>, <81>;
> +			interrupt-names = "tx", "rx";
> +			status = "disabled";
> +			dmas = <&edma 8>,
> +			       <&edma 9>;
> +			dma-names = "tx", "rx";
> +		};
> +
> +		mcasp1: mcasp@4803C000 {
> +			compatible = "ti,am33xx-mcasp-audio";
> +			ti,hwmods = "mcasp1";
> +			reg = <0x4803C000 0x2000>,
> +			      <0x46400000 0x400000>;
> +			reg-names = "mpu", "dat";
> +			interrupts = <82>, <83>;
> +			interrupt-names = "tx", "rx";
> +			status = "disabled";
> +			dmas = <&edma 10>,
> +			       <&edma 11>;
> +			dma-names = "tx", "rx";
> +		};
> +
> +		elm: elm@48080000 {
> +			compatible = "ti,am3352-elm";
> +			reg = <0x48080000 0x2000>;
> +			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "elm";
> +			clocks = <&l4ls_gclk>;
> +			clock-names = "fck";
> +			status = "disabled";
> +		};
> +
> +		gpmc: gpmc@50000000 {
> +			compatible = "ti,am3352-gpmc";
> +			ti,hwmods = "gpmc";
> +			clocks = <&l3s_gclk>;
> +			clock-names = "fck";
> +			reg = <0x50000000 0x2000>;
> +			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
> +			gpmc,num-cs = <7>;
> +			gpmc,num-waitpins = <2>;
> +			#address-cells = <2>;
> +			#size-cells = <1>;
> +			status = "disabled";
> +		};
> +
> +		am43xx_control_usb2phy1: control-phy@44e10620 {
> +			compatible = "ti,control-phy-usb2-am437";
> +			reg = <0x44e10620 0x4>;
> +			reg-names = "power";
> +		};
> +
> +		am43xx_control_usb2phy2: control-phy@0x44e10628 {
> +			compatible = "ti,control-phy-usb2-am437";
> +			reg = <0x44e10628 0x4>;
> +			reg-names = "power";
> +		};
> +
> +		ocp2scp0: ocp2scp@483a8000 {
> +			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "ocp2scp0";
> +
> +			usb2_phy1: phy@483a8000 {
> +				compatible = "ti,am437x-usb2";
> +				reg = <0x483a8000 0x8000>;
> +				ctrl-module = <&am43xx_control_usb2phy1>;
> +				clocks = <&usb_phy0_always_on_clk32k>,
> +					 <&usb_otg_ss0_refclk960m>;
> +				clock-names = "wkupclk", "refclk";
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		ocp2scp1: ocp2scp@483e8000 {
> +			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +			ti,hwmods = "ocp2scp1";
> +
> +			usb2_phy2: phy@483e8000 {
> +				compatible = "ti,am437x-usb2";
> +				reg = <0x483e8000 0x8000>;
> +				ctrl-module = <&am43xx_control_usb2phy2>;
> +				clocks = <&usb_phy1_always_on_clk32k>,
> +					 <&usb_otg_ss1_refclk960m>;
> +				clock-names = "wkupclk", "refclk";
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		dwc3_1: omap_dwc3@48380000 {
> +			compatible = "ti,am437x-dwc3";
> +			ti,hwmods = "usb_otg_ss0";
> +			reg = <0x48380000 0x10000>;
> +			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			utmi-mode = <1>;
> +			ranges;
> +
> +			usb1: usb@48390000 {
> +				compatible = "synopsys,dwc3";
> +				reg = <0x48390000 0x10000>;
> +				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb2_phy1>;
> +				phy-names = "usb2-phy";
> +				maximum-speed = "high-speed";
> +				dr_mode = "otg";
> +				status = "disabled";
> +				snps,dis_u3_susphy_quirk;
> +				snps,dis_u2_susphy_quirk;
> +			};
> +		};
> +
> +		dwc3_2: omap_dwc3@483c0000 {
> +			compatible = "ti,am437x-dwc3";
> +			ti,hwmods = "usb_otg_ss1";
> +			reg = <0x483c0000 0x10000>;
> +			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			utmi-mode = <1>;
> +			ranges;
> +
> +			usb2: usb@483d0000 {
> +				compatible = "synopsys,dwc3";
> +				reg = <0x483d0000 0x10000>;
> +				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
> +				phys = <&usb2_phy2>;
> +				phy-names = "usb2-phy";
> +				maximum-speed = "high-speed";
> +				dr_mode = "otg";
> +				status = "disabled";
> +				snps,dis_u3_susphy_quirk;
> +				snps,dis_u2_susphy_quirk;
> +			};
> +		};
> +
> +		qspi: qspi@47900000 {
> +			compatible = "ti,am4372-qspi";
> +			reg = <0x47900000 0x100>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			ti,hwmods = "qspi";
> +			interrupts = <0 138 0x4>;
> +			num-cs = <4>;
> +			status = "disabled";
> +		};
> +
> +		hdq: hdq@48347000 {
> +			compatible = "ti,am4372-hdq";
> +			reg = <0x48347000 0x1000>;
> +			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&func_12m_clk>;
> +			clock-names = "fck";
> +			ti,hwmods = "hdq1w";
> +			status = "disabled";
> +		};
> +
> +		dss: dss@4832a000 {
> +			compatible = "ti,omap3-dss";
> +			reg = <0x4832a000 0x200>;
> +			status = "disabled";
> +			ti,hwmods = "dss_core";
> +			clocks = <&disp_clk>;
> +			clock-names = "fck";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			ranges;
> +
> +			dispc: dispc@4832a400 {
> +				compatible = "ti,omap3-dispc";
> +				reg = <0x4832a400 0x400>;
> +				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
> +				ti,hwmods = "dss_dispc";
> +				clocks = <&disp_clk>;
> +				clock-names = "fck";
> +			};
> +
> +			rfbi: rfbi@4832a800 {
> +				compatible = "ti,omap3-rfbi";
> +				reg = <0x4832a800 0x100>;
> +				ti,hwmods = "dss_rfbi";
> +				clocks = <&disp_clk>;
> +				clock-names = "fck";
> +				status = "disabled";
> +			};
> +		};
> +
> +		ocmcram: ocmcram@40300000 {
> +			compatible = "mmio-sram";
> +			reg = <0x40300000 0x40000>; /* 256k */
> +		};
> +
> +		dcan0: can@481cc000 {
> +			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
> +			ti,hwmods = "d_can0";
> +			clocks = <&dcan0_fck>;
> +			clock-names = "fck";
> +			reg = <0x481cc000 0x2000>;
> +			syscon-raminit = <&scm_conf 0x644 0>;
> +			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		dcan1: can@481d0000 {
> +			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
> +			ti,hwmods = "d_can1";
> +			clocks = <&dcan1_fck>;
> +			clock-names = "fck";
> +			reg = <0x481d0000 0x2000>;
> +			syscon-raminit = <&scm_conf 0x644 1>;
> +			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disabled";
> +		};
> +
> +		vpfe0: vpfe@48326000 {
> +			compatible = "ti,am437x-vpfe";
> +			reg = <0x48326000 0x2000>;
> +			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "vpfe0";
> +			status = "disabled";
> +		};
> +
> +		vpfe1: vpfe@48328000 {
> +			compatible = "ti,am437x-vpfe";
> +			reg = <0x48328000 0x2000>;
> +			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> +			ti,hwmods = "vpfe1";
> +			status = "disabled";
> +		};
> +	};
> +};
> +
> +/include/ "am43xx-clocks.dtsi"
> diff --git a/arch/arm/dts/am437x-gp-evm.dts b/arch/arm/dts/am437x-gp-evm.dts
> new file mode 100644
> index 0000000..b5f0b4e
> --- /dev/null
> +++ b/arch/arm/dts/am437x-gp-evm.dts
> @@ -0,0 +1,797 @@
> +/*
> + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/* AM437x GP EVM */
> +
> +/dts-v1/;
> +
> +#include "am4372.dtsi"
> +#include <dt-bindings/pinctrl/am43xx.h>
> +#include <dt-bindings/pwm/pwm.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "TI AM437x GP EVM";
> +	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
> +
> +	aliases {
> +		display0 = &lcd0;
> +		serial3 = &uart3;
> +	};
> +
> +	chosen {
> +		stdout-path = &uart0;
> +	};
> +
> +	vmmcsd_fixed: fixedregulator-sd {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmcsd_fixed";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		enable-active-high;
> +	};
> +
> +	vtt_fixed: fixedregulator-vtt {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vtt_fixed";
> +		regulator-min-microvolt = <1500000>;
> +		regulator-max-microvolt = <1500000>;
> +		regulator-always-on;
> +		regulator-boot-on;
> +		enable-active-high;
> +		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	vmmcwl_fixed: fixedregulator-mmcwl {
> +		compatible = "regulator-fixed";
> +		regulator-name = "vmmcwl_fixed";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
> +		brightness-levels = <0 51 53 56 62 75 101 152 255>;
> +		default-brightness-level = <8>;
> +	};
> +
> +	matrix_keypad: matrix_keypad@0 {
> +		compatible = "gpio-matrix-keypad";
> +		debounce-delay-ms = <5>;
> +		col-scan-delay-us = <2>;
> +
> +		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
> +				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
> +				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
> +
> +		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
> +				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
> +
> +		linux,keymap = <0x00000201      /* P1 */
> +				0x00010202      /* P2 */
> +				0x01000067      /* UP */
> +				0x0101006a      /* RIGHT */
> +				0x02000069      /* LEFT */
> +				0x0201006c>;      /* DOWN */
> +		};
> +
> +	lcd0: display {
> +		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
> +		label = "lcd";
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&lcd_pins>;
> +
> +		/*
> +		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
> +		 * panel's enable GPIO, but we don't have HDMI driver support nor
> +		 * support to switch between two displays, so using this gpio as
> +		 * panel's enable should be safe.
> +		 */
> +		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
> +
> +		panel-timing {
> +			clock-frequency = <33000000>;
> +			hactive = <800>;
> +			vactive = <480>;
> +			hfront-porch = <210>;
> +			hback-porch = <16>;
> +			hsync-len = <30>;
> +			vback-porch = <10>;
> +			vfront-porch = <22>;
> +			vsync-len = <13>;
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +			de-active = <1>;
> +			pixelclk-active = <1>;
> +		};
> +
> +		port {
> +			lcd_in: endpoint {
> +				remote-endpoint = <&dpi_out>;
> +			};
> +		};
> +	};
> +
> +	/* fixed 12MHz oscillator */
> +	refclk: oscillator {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <12000000>;
> +	};
> +
> +};
> +
> +&am43xx_pinmux {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&wlan_pins_default>;
> +	pinctrl-1 = <&wlan_pins_sleep>;
> +
> +	i2c0_pins: i2c0_pins {
> +		pinctrl-single,pins = <
> +			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
> +			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
> +		>;
> +	};
> +
> +	i2c1_pins: i2c1_pins {
> +		pinctrl-single,pins = <
> +			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
> +			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
> +		>;
> +	};
> +
> +	mmc1_pins: pinmux_mmc1_pins {
> +		pinctrl-single,pins = <
> +			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
> +		>;
> +	};
> +
> +	ecap0_pins: backlight_pins {
> +		pinctrl-single,pins = <
> +			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
> +		>;
> +	};
> +
> +	pixcir_ts_pins: pixcir_ts_pins {
> +		pinctrl-single,pins = <
> +			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
> +		>;
> +	};
> +
> +	cpsw_default: cpsw_default {
> +		pinctrl-single,pins = <
> +			/* Slave 1 */
> +			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
> +			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
> +			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
> +			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
> +			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
> +			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
> +			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
> +			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
> +			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
> +			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
> +			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
> +			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
> +		>;
> +	};
> +
> +	cpsw_sleep: cpsw_sleep {
> +		pinctrl-single,pins = <
> +			/* Slave 1 reset value */
> +			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +		>;
> +	};
> +
> +	davinci_mdio_default: davinci_mdio_default {
> +		pinctrl-single,pins = <
> +			/* MDIO */
> +			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
> +			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
> +		>;
> +	};
> +
> +	davinci_mdio_sleep: davinci_mdio_sleep {
> +		pinctrl-single,pins = <
> +			/* MDIO reset value */
> +			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
> +		>;
> +	};
> +
> +	nand_flash_x8: nand_flash_x8 {
> +		pinctrl-single,pins = <
> +			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
> +			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
> +			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
> +			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
> +			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
> +			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
> +			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
> +			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
> +			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
> +			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
> +			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
> +			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
> +			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
> +			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
> +			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
> +			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
> +		>;
> +	};
> +
> +	dss_pins: dss_pins {
> +		pinctrl-single,pins = <
> +			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
> +			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
> +			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
> +			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
> +			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
> +			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
> +			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
> +			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
> +			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
> +			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
> +
> +		>;
> +	};
> +
> +	lcd_pins: lcd_pins {
> +		pinctrl-single,pins = <
> +			/* GPIO 5_8 to select LCD / HDMI */
> +			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
> +		>;
> +	};
> +
> +	dcan0_default: dcan0_default_pins {
> +		pinctrl-single,pins = <
> +			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
> +			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
> +		>;
> +	};
> +
> +	dcan1_default: dcan1_default_pins {
> +		pinctrl-single,pins = <
> +			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
> +			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
> +		>;
> +	};
> +
> +	vpfe0_pins_default: vpfe0_pins_default {
> +		pinctrl-single,pins = <
> +			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
> +			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
> +			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
> +			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
> +			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
> +			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
> +			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
> +			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
> +			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
> +			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
> +			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
> +			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
> +			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
> +		>;
> +	};
> +
> +	vpfe0_pins_sleep: vpfe0_pins_sleep {
> +		pinctrl-single,pins = <
> +			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
> +			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
> +			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
> +			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
> +			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
> +			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
> +			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
> +			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
> +			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
> +			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
> +			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
> +			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
> +			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
> +		>;
> +	};
> +
> +	vpfe1_pins_default: vpfe1_pins_default {
> +		pinctrl-single,pins = <
> +			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
> +			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
> +			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
> +			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
> +			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
> +			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
> +			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
> +			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
> +			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
> +			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
> +			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
> +			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
> +			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
> +		>;
> +	};
> +
> +	vpfe1_pins_sleep: vpfe1_pins_sleep {
> +		pinctrl-single,pins = <
> +			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
> +			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
> +			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
> +			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
> +			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
> +			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
> +			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
> +			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
> +			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
> +			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
> +			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
> +			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
> +			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
> +		>;
> +	};
> +
> +	mmc3_pins_default: pinmux_mmc3_pins_default {
> +		pinctrl-single,pins = <
> +			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
> +			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
> +			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
> +			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
> +			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
> +			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
> +		>;
> +	};
> +
> +	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
> +		pinctrl-single,pins = <
> +			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
> +			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
> +			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
> +			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
> +			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
> +			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
> +		>;
> +	};
> +
> +	wlan_pins_default: pinmux_wlan_pins_default {
> +		pinctrl-single,pins = <
> +			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
> +			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
> +			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
> +		>;
> +	};
> +
> +	wlan_pins_sleep: pinmux_wlan_pins_sleep {
> +		pinctrl-single,pins = <
> +			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
> +			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
> +			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
> +		>;
> +	};
> +
> +	uart3_pins: uart3_pins {
> +		pinctrl-single,pins = <
> +			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
> +			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
> +			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
> +			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
> +		>;
> +	};
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c0_pins>;
> +	clock-frequency = <100000>;
> +
> +	tps65218: tps65218@24 {
> +		reg = <0x24>;
> +		compatible = "ti,tps65218";
> +		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +
> +		dcdc1: regulator-dcdc1 {
> +			compatible = "ti,tps65218-dcdc1";
> +			regulator-name = "vdd_core";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <1144000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		dcdc2: regulator-dcdc2 {
> +			compatible = "ti,tps65218-dcdc2";
> +			regulator-name = "vdd_mpu";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <1378000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		dcdc3: regulator-dcdc3 {
> +			compatible = "ti,tps65218-dcdc3";
> +			regulator-name = "vdcdc3";
> +			regulator-min-microvolt = <1500000>;
> +			regulator-max-microvolt = <1500000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +		dcdc5: regulator-dcdc5 {
> +			compatible = "ti,tps65218-dcdc5";
> +			regulator-name = "v1_0bat";
> +			regulator-min-microvolt = <1000000>;
> +			regulator-max-microvolt = <1000000>;
> +		};
> +
> +		dcdc6: regulator-dcdc6 {
> +			compatible = "ti,tps65218-dcdc6";
> +			regulator-name = "v1_8bat";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +		};
> +
> +		ldo1: regulator-ldo1 {
> +			compatible = "ti,tps65218-ldo1";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +	};
> +
> +	ov2659@30 {
> +		compatible = "ovti,ov2659";
> +		reg = <0x30>;
> +
> +		clocks = <&refclk 0>;
> +		clock-names = "xvclk";
> +
> +		port {
> +			ov2659_0: endpoint {
> +				remote-endpoint = <&vpfe1_ep>;
> +				link-frequencies = /bits/ 64 <70000000>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins>;
> +	pixcir_ts@5c {
> +		compatible = "pixcir,pixcir_tangoc";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pixcir_ts_pins>;
> +		reg = <0x5c>;
> +		interrupt-parent = <&gpio3>;
> +		interrupts = <22 0>;
> +
> +		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
> +
> +		touchscreen-size-x = <1024>;
> +		touchscreen-size-y = <600>;
> +	};
> +
> +	ov2659@30 {
> +		compatible = "ovti,ov2659";
> +		reg = <0x30>;
> +
> +		clocks = <&refclk 0>;
> +		clock-names = "xvclk";
> +
> +		port {
> +			ov2659_1: endpoint {
> +				remote-endpoint = <&vpfe0_ep>;
> +				link-frequencies = /bits/ 64 <70000000>;
> +			};
> +		};
> +	};
> +};
> +
> +&epwmss0 {
> +	status = "okay";
> +};
> +
> +&tscadc {
> +	status = "okay";
> +
> +	adc {
> +		ti,adc-channels = <0 1 2 3 4 5 6 7>;
> +	};
> +};
> +
> +&ecap0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ecap0_pins>;
> +};
> +
> +&gpio0 {
> +	status = "okay";
> +};
> +
> +&gpio1 {
> +	status = "okay";
> +};
> +
> +&gpio3 {
> +	status = "okay";
> +};
> +
> +&gpio4 {
> +	status = "okay";
> +};
> +
> +&gpio5 {
> +	status = "okay";
> +	ti,no-reset-on-init;
> +};
> +
> +&mmc1 {
> +	status = "okay";
> +	vmmc-supply = <&vmmcsd_fixed>;
> +	bus-width = <4>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc1_pins>;
> +	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&mmc3 {
> +	/* disable MMC3 as SDIO is not supported in U-Boot */
> +	status = "disabled";
> +	/* these are on the crossbar and are outlined in the
> +	   xbar-event-map element */
> +	dmas = <&edma 30
> +		&edma 31>;
> +	dma-names = "tx", "rx";
> +	vmmc-supply = <&vmmcwl_fixed>;
> +	bus-width = <4>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&mmc3_pins_default>;
> +	pinctrl-1 = <&mmc3_pins_sleep>;
> +	cap-power-off-card;
> +	keep-power-in-suspend;
> +	ti,non-removable;
> +
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +	wlcore: wlcore@0 {
> +		compatible = "ti,wl1835";
> +		reg = <2>;
> +		interrupt-parent = <&gpio1>;
> +		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
> +	};
> +};
> +
> +&edma {
> +	ti,edma-xbar-event-map = /bits/ 16 <1 30
> +					    2 31>;
> +};
> +
> +&uart3 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&uart3_pins>;
> +};
> +
> +&usb2_phy1 {
> +	status = "okay";
> +};
> +
> +&usb1 {
> +	dr_mode = "peripheral";
> +	status = "okay";
> +};
> +
> +&usb2_phy2 {
> +	status = "okay";
> +};
> +
> +&usb2 {
> +	dr_mode = "host";
> +	status = "okay";
> +};
> +
> +&mac {
> +	slaves = <1>;
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&cpsw_default>;
> +	pinctrl-1 = <&cpsw_sleep>;
> +	status = "okay";
> +};
> +
> +&davinci_mdio {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&davinci_mdio_default>;
> +	pinctrl-1 = <&davinci_mdio_sleep>;
> +	status = "okay";
> +};
> +
> +&cpsw_emac0 {
> +	phy_id = <&davinci_mdio>, <0>;
> +	phy-mode = "rgmii";
> +};
> +
> +&elm {
> +	status = "okay";
> +};
> +
> +&gpmc {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&nand_flash_x8>;
> +	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
> +	nand@0,0 {
> +		reg = <0 0 4>;		/* device IO registers */
> +		ti,nand-ecc-opt = "bch16";
> +		ti,elm-id = <&elm>;
> +		nand-bus-width = <8>;
> +		gpmc,device-width = <1>;
> +		gpmc,sync-clk-ps = <0>;
> +		gpmc,cs-on-ns = <0>;
> +		gpmc,cs-rd-off-ns = <40>;
> +		gpmc,cs-wr-off-ns = <40>;
> +		gpmc,adv-on-ns = <0>;
> +		gpmc,adv-rd-off-ns = <25>;
> +		gpmc,adv-wr-off-ns = <25>;
> +		gpmc,we-on-ns = <0>;
> +		gpmc,we-off-ns = <20>;
> +		gpmc,oe-on-ns = <3>;
> +		gpmc,oe-off-ns = <30>;
> +		gpmc,access-ns = <30>;
> +		gpmc,rd-cycle-ns = <40>;
> +		gpmc,wr-cycle-ns = <40>;
> +		gpmc,wait-pin = <0>;
> +		gpmc,bus-turnaround-ns = <0>;
> +		gpmc,cycle2cycle-delay-ns = <0>;
> +		gpmc,clk-activation-ns = <0>;
> +		gpmc,wait-monitoring-ns = <0>;
> +		gpmc,wr-access-ns = <40>;
> +		gpmc,wr-data-mux-bus-ns = <0>;
> +		/* MTD partition table */
> +		/* All SPL-* partitions are sized to minimal length
> +		 * which can be independently programmable. For
> +		 * NAND flash this is equal to size of erase-block */
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		partition@0 {
> +			label = "NAND.SPL";
> +			reg = <0x00000000 0x00040000>;
> +		};
> +		partition@1 {
> +			label = "NAND.SPL.backup1";
> +			reg = <0x00040000 0x00040000>;
> +		};
> +		partition@2 {
> +			label = "NAND.SPL.backup2";
> +			reg = <0x00080000 0x00040000>;
> +		};
> +		partition@3 {
> +			label = "NAND.SPL.backup3";
> +			reg = <0x000c0000 0x00040000>;
> +		};
> +		partition@4 {
> +			label = "NAND.u-boot-spl-os";
> +			reg = <0x00100000 0x00080000>;
> +		};
> +		partition@5 {
> +			label = "NAND.u-boot";
> +			reg = <0x00180000 0x00100000>;
> +		};
> +		partition@6 {
> +			label = "NAND.u-boot-env";
> +			reg = <0x00280000 0x00040000>;
> +		};
> +		partition@7 {
> +			label = "NAND.u-boot-env.backup1";
> +			reg = <0x002c0000 0x00040000>;
> +		};
> +		partition@8 {
> +			label = "NAND.kernel";
> +			reg = <0x00300000 0x00700000>;
> +		};
> +		partition@9 {
> +			label = "NAND.file-system";
> +			reg = <0x00a00000 0x1f600000>;
> +		};
> +	};
> +};
> +
> +&dss {
> +	status = "ok";
> +
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&dss_pins>;
> +
> +	port {
> +		dpi_out: endpoint@0 {
> +			remote-endpoint = <&lcd_in>;
> +			data-lines = <24>;
> +		};
> +	};
> +};
> +
> +&dcan0 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&dcan0_default>;
> +	status = "okay";
> +};
> +
> +&dcan1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&dcan1_default>;
> +	status = "okay";
> +};
> +
> +&vpfe0 {
> +	status = "okay";
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&vpfe0_pins_default>;
> +	pinctrl-1 = <&vpfe0_pins_sleep>;
> +
> +	port {
> +		vpfe0_ep: endpoint {
> +			remote-endpoint = <&ov2659_1>;
> +			ti,am437x-vpfe-interface = <0>;
> +			bus-width = <8>;
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +		};
> +	};
> +};
> +
> +&vpfe1 {
> +	status = "okay";
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&vpfe1_pins_default>;
> +	pinctrl-1 = <&vpfe1_pins_sleep>;
> +
> +	port {
> +		vpfe1_ep: endpoint {
> +			remote-endpoint = <&ov2659_0>;
> +			ti,am437x-vpfe-interface = <0>;
> +			bus-width = <8>;
> +			hsync-active = <0>;
> +			vsync-active = <0>;
> +		};
> +	};
> +};
> diff --git a/arch/arm/dts/am43xx-clocks.dtsi b/arch/arm/dts/am43xx-clocks.dtsi
> new file mode 100644
> index 0000000..d0c0dfa
> --- /dev/null
> +++ b/arch/arm/dts/am43xx-clocks.dtsi
> @@ -0,0 +1,757 @@
> +/*
> + * Device Tree Source for AM43xx clock data
> + *
> + * Copyright (C) 2013 Texas Instruments, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +&scm_clocks {
> +	sys_clkin_ck: sys_clkin_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
> +		ti,bit-shift = <31>;
> +		reg = <0x0040>;
> +	};
> +
> +	crystal_freq_sel_ck: crystal_freq_sel_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
> +		ti,bit-shift = <29>;
> +		reg = <0x0040>;
> +	};
> +
> +	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
> +		ti,bit-shift = <22>;
> +		reg = <0x0040>;
> +	};
> +
> +	adc_tsc_fck: adc_tsc_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	dcan0_fck: dcan0_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	dcan1_fck: dcan1_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	mcasp0_fck: mcasp0_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	mcasp1_fck: mcasp1_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	smartreflex0_fck: smartreflex0_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	smartreflex1_fck: smartreflex1_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	sha0_fck: sha0_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	aes0_fck: aes0_fck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	ehrpwm0_tbclk: ehrpwm0_tbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&l4ls_gclk>;
> +		ti,bit-shift = <0>;
> +		reg = <0x0664>;
> +	};
> +
> +	ehrpwm1_tbclk: ehrpwm1_tbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&l4ls_gclk>;
> +		ti,bit-shift = <1>;
> +		reg = <0x0664>;
> +	};
> +
> +	ehrpwm2_tbclk: ehrpwm2_tbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&l4ls_gclk>;
> +		ti,bit-shift = <2>;
> +		reg = <0x0664>;
> +	};
> +
> +	ehrpwm3_tbclk: ehrpwm3_tbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&l4ls_gclk>;
> +		ti,bit-shift = <4>;
> +		reg = <0x0664>;
> +	};
> +
> +	ehrpwm4_tbclk: ehrpwm4_tbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&l4ls_gclk>;
> +		ti,bit-shift = <5>;
> +		reg = <0x0664>;
> +	};
> +
> +	ehrpwm5_tbclk: ehrpwm5_tbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&l4ls_gclk>;
> +		ti,bit-shift = <6>;
> +		reg = <0x0664>;
> +	};
> +};
> +&prcm_clocks {
> +	clk_32768_ck: clk_32768_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +	};
> +
> +	clk_rc32k_ck: clk_rc32k_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +	};
> +
> +	virt_19200000_ck: virt_19200000_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <19200000>;
> +	};
> +
> +	virt_24000000_ck: virt_24000000_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <24000000>;
> +	};
> +
> +	virt_25000000_ck: virt_25000000_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <25000000>;
> +	};
> +
> +	virt_26000000_ck: virt_26000000_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <26000000>;
> +	};
> +
> +	tclkin_ck: tclkin_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <26000000>;
> +	};
> +
> +	dpll_core_ck: dpll_core_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-core-clock";
> +		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
> +		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
> +	};
> +
> +	dpll_core_x2_ck: dpll_core_x2_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-x2-clock";
> +		clocks = <&dpll_core_ck>;
> +	};
> +
> +	dpll_core_m4_ck: dpll_core_m4_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_core_x2_ck>;
> +		ti,max-div = <31>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2d38>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dpll_core_m5_ck: dpll_core_m5_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_core_x2_ck>;
> +		ti,max-div = <31>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2d3c>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dpll_core_m6_ck: dpll_core_m6_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_core_x2_ck>;
> +		ti,max-div = <31>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2d40>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dpll_mpu_ck: dpll_mpu_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-clock";
> +		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
> +		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
> +	};
> +
> +	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_mpu_ck>;
> +		ti,max-div = <31>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2d70>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dpll_ddr_ck: dpll_ddr_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-clock";
> +		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
> +		reg = <0x2da0>, <0x2da4>, <0x2dac>;
> +	};
> +
> +	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_ddr_ck>;
> +		ti,max-div = <31>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2db0>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dpll_disp_ck: dpll_disp_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-clock";
> +		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
> +		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
> +	};
> +
> +	dpll_disp_m2_ck: dpll_disp_m2_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_disp_ck>;
> +		ti,max-div = <31>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2e30>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +		ti,set-rate-parent;
> +	};
> +
> +	dpll_per_ck: dpll_per_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-j-type-clock";
> +		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
> +		reg = <0x2de0>, <0x2de4>, <0x2dec>;
> +	};
> +
> +	dpll_per_m2_ck: dpll_per_m2_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_per_ck>;
> +		ti,max-div = <127>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2df0>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_per_m2_ck>;
> +		clock-mult = <1>;
> +		clock-div = <4>;
> +	};
> +
> +	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_per_m2_ck>;
> +		clock-mult = <1>;
> +		clock-div = <4>;
> +	};
> +
> +	clk_24mhz: clk_24mhz {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_per_m2_ck>;
> +		clock-mult = <1>;
> +		clock-div = <8>;
> +	};
> +
> +	clkdiv32k_ck: clkdiv32k_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&clk_24mhz>;
> +		clock-mult = <1>;
> +		clock-div = <732>;
> +	};
> +
> +	clkdiv32k_ick: clkdiv32k_ick {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&clkdiv32k_ck>;
> +		ti,bit-shift = <8>;
> +		reg = <0x2a38>;
> +	};
> +
> +	sysclk_div: sysclk_div {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_core_m4_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	pruss_ocp_gclk: pruss_ocp_gclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
> +		reg = <0x4248>;
> +	};
> +
> +	clk_32k_tpm_ck: clk_32k_tpm_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +	};
> +
> +	timer1_fck: timer1_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
> +		reg = <0x4200>;
> +	};
> +
> +	timer2_fck: timer2_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
> +		reg = <0x4204>;
> +	};
> +
> +	timer3_fck: timer3_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
> +		reg = <0x4208>;
> +	};
> +
> +	timer4_fck: timer4_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
> +		reg = <0x420c>;
> +	};
> +
> +	timer5_fck: timer5_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
> +		reg = <0x4210>;
> +	};
> +
> +	timer6_fck: timer6_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
> +		reg = <0x4214>;
> +	};
> +
> +	timer7_fck: timer7_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
> +		reg = <0x4218>;
> +	};
> +
> +	wdt1_fck: wdt1_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
> +		reg = <0x422c>;
> +	};
> +
> +	l3_gclk: l3_gclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_core_m4_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sysclk_div>;
> +		clock-mult = <1>;
> +		clock-div = <2>;
> +	};
> +
> +	l4hs_gclk: l4hs_gclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_core_m4_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	l3s_gclk: l3s_gclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_core_m4_div2_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	l4ls_gclk: l4ls_gclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_core_m4_div2_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_core_m5_ck>;
> +		clock-mult = <1>;
> +		clock-div = <2>;
> +	};
> +
> +	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
> +		reg = <0x4238>;
> +	};
> +
> +	clk_32k_mosc_ck: clk_32k_mosc_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-clock";
> +		clock-frequency = <32768>;
> +	};
> +
> +	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
> +		reg = <0x4240>;
> +	};
> +
> +	gpio0_dbclk: gpio0_dbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&gpio0_dbclk_mux_ck>;
> +		ti,bit-shift = <8>;
> +		reg = <0x2b68>;
> +	};
> +
> +	gpio1_dbclk: gpio1_dbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&clkdiv32k_ick>;
> +		ti,bit-shift = <8>;
> +		reg = <0x8c78>;
> +	};
> +
> +	gpio2_dbclk: gpio2_dbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&clkdiv32k_ick>;
> +		ti,bit-shift = <8>;
> +		reg = <0x8c80>;
> +	};
> +
> +	gpio3_dbclk: gpio3_dbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&clkdiv32k_ick>;
> +		ti,bit-shift = <8>;
> +		reg = <0x8c88>;
> +	};
> +
> +	gpio4_dbclk: gpio4_dbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&clkdiv32k_ick>;
> +		ti,bit-shift = <8>;
> +		reg = <0x8c90>;
> +	};
> +
> +	gpio5_dbclk: gpio5_dbclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&clkdiv32k_ick>;
> +		ti,bit-shift = <8>;
> +		reg = <0x8c98>;
> +	};
> +
> +	mmc_clk: mmc_clk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_per_m2_ck>;
> +		clock-mult = <1>;
> +		clock-div = <2>;
> +	};
> +
> +	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
> +		ti,bit-shift = <1>;
> +		reg = <0x423c>;
> +	};
> +
> +	gfx_fck_div_ck: gfx_fck_div_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&gfx_fclk_clksel_ck>;
> +		reg = <0x423c>;
> +		ti,max-div = <2>;
> +	};
> +
> +	disp_clk: disp_clk {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
> +		reg = <0x4244>;
> +		ti,set-rate-parent;
> +	};
> +
> +	dpll_extdev_ck: dpll_extdev_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-clock";
> +		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
> +		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
> +	};
> +
> +	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_extdev_ck>;
> +		ti,max-div = <127>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2e70>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	mux_synctimer32k_ck: mux_synctimer32k_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
> +		reg = <0x4230>;
> +	};
> +
> +	synctimer_32kclk: synctimer_32kclk {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&mux_synctimer32k_ck>;
> +		ti,bit-shift = <8>;
> +		reg = <0x2a30>;
> +	};
> +
> +	timer8_fck: timer8_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
> +		reg = <0x421c>;
> +	};
> +
> +	timer9_fck: timer9_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
> +		reg = <0x4220>;
> +	};
> +
> +	timer10_fck: timer10_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
> +		reg = <0x4224>;
> +	};
> +
> +	timer11_fck: timer11_fck {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
> +		reg = <0x4228>;
> +	};
> +
> +	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_core_m5_ck>;
> +		clock-mult = <1>;
> +		clock-div = <1>;
> +	};
> +
> +	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&cpsw_50m_clkdiv>;
> +		clock-mult = <1>;
> +		clock-div = <10>;
> +	};
> +
> +	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,am3-dpll-x2-clock";
> +		clocks = <&dpll_ddr_ck>;
> +	};
> +
> +	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&dpll_ddr_x2_ck>;
> +		ti,max-div = <31>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2db8>;
> +		ti,index-starts-at-one;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
> +		#clock-cells = <0>;
> +		compatible = "ti,fixed-factor-clock";
> +		clocks = <&dpll_per_ck>;
> +		ti,clock-mult = <1>;
> +		ti,clock-div = <1>;
> +		ti,autoidle-shift = <8>;
> +		reg = <0x2e14>;
> +		ti,invert-autoidle-bit;
> +	};
> +
> +	dll_aging_clk_div: dll_aging_clk_div {
> +		#clock-cells = <0>;
> +		compatible = "ti,divider-clock";
> +		clocks = <&sys_clkin_ck>;
> +		reg = <0x4250>;
> +		ti,dividers = <8>, <16>, <32>;
> +	};
> +
> +	div_core_25m_ck: div_core_25m_ck {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sysclk_div>;
> +		clock-mult = <1>;
> +		clock-div = <8>;
> +	};
> +
> +	func_12m_clk: func_12m_clk {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&dpll_per_m2_ck>;
> +		clock-mult = <1>;
> +		clock-div = <16>;
> +	};
> +
> +	vtp_clk_div: vtp_clk_div {
> +		#clock-cells = <0>;
> +		compatible = "fixed-factor-clock";
> +		clocks = <&sys_clkin_ck>;
> +		clock-mult = <1>;
> +		clock-div = <2>;
> +	};
> +
> +	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
> +		#clock-cells = <0>;
> +		compatible = "ti,mux-clock";
> +		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
> +		reg = <0x4260>;
> +	};
> +
> +	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&usbphy_32khz_clkmux>;
> +		ti,bit-shift = <8>;
> +		reg = <0x2a40>;
> +	};
> +
> +	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&usbphy_32khz_clkmux>;
> +		ti,bit-shift = <8>;
> +		reg = <0x2a48>;
> +	};
> +
> +	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&dpll_per_clkdcoldo>;
> +		ti,bit-shift = <8>;
> +		reg = <0x8a60>;
> +	};
> +
> +	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
> +		#clock-cells = <0>;
> +		compatible = "ti,gate-clock";
> +		clocks = <&dpll_per_clkdcoldo>;
> +		ti,bit-shift = <8>;
> +		reg = <0x8a68>;
> +	};
> +};
> diff --git a/configs/am437x_gp_evm_defconfig b/configs/am437x_gp_evm_defconfig
> new file mode 100644
> index 0000000..53fb0bf
> --- /dev/null
> +++ b/configs/am437x_gp_evm_defconfig
> @@ -0,0 +1,17 @@
> +CONFIG_ARM=y
> +CONFIG_TARGET_AM43XX_EVM=y
> +CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
> +CONFIG_SPL=y
> +CONFIG_SPL_STACK_R=y
> +CONFIG_SPL_STACK_R_ADDR=0x82000000
> +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_DISABLE_OF_CONTROL=y
> +CONFIG_DM=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_SERIAL=y
> +CONFIG_DM_MMC=y
> diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
> new file mode 100644
> index 0000000..7203687
> --- /dev/null
> +++ b/include/dt-bindings/pinctrl/am43xx.h
> @@ -0,0 +1,33 @@
> +/*
> + * This header provides constants specific to AM43XX pinctrl bindings.
> + */
> +
> +#ifndef _DT_BINDINGS_PINCTRL_AM43XX_H
> +#define _DT_BINDINGS_PINCTRL_AM43XX_H
> +
> +#define MUX_MODE0	0
> +#define MUX_MODE1	1
> +#define MUX_MODE2	2
> +#define MUX_MODE3	3
> +#define MUX_MODE4	4
> +#define MUX_MODE5	5
> +#define MUX_MODE6	6
> +#define MUX_MODE7	7
> +#define MUX_MODE8	8
> +
> +#define PULL_DISABLE		(1 << 16)
> +#define PULL_UP			(1 << 17)
> +#define INPUT_EN		(1 << 18)
> +#define SLEWCTRL_SLOW		(1 << 19)
> +#define SLEWCTRL_FAST		0
> +#define DS0_PULL_UP_DOWN_EN	(1 << 27)
> +#define WAKEUP_ENABLE		(1 << 29)
> +
> +#define PIN_OUTPUT		(PULL_DISABLE)
> +#define PIN_OUTPUT_PULLUP	(PULL_UP)
> +#define PIN_OUTPUT_PULLDOWN	0
> +#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
> +#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
> +#define PIN_INPUT_PULLDOWN	(INPUT_EN)
> +
> +#endif
> diff --git a/include/dt-bindings/pwm/pwm.h b/include/dt-bindings/pwm/pwm.h
> new file mode 100644
> index 0000000..96f49e8
> --- /dev/null
> +++ b/include/dt-bindings/pwm/pwm.h
> @@ -0,0 +1,14 @@
> +/*
> + * This header provides constants for most PWM bindings.
> + *
> + * Most PWM bindings can include a flags cell as part of the PWM specifier.
> + * In most cases, the format of the flags cell uses the standard values
> + * defined in this header.
> + */
> +
> +#ifndef _DT_BINDINGS_PWM_PWM_H
> +#define _DT_BINDINGS_PWM_PWM_H
> +
> +#define PWM_POLARITY_INVERTED			(1 << 0)
> +
> +#endif
>
Tom Rini Oct. 22, 2015, 9:23 p.m. UTC | #2 
On Mon, Sep 28, 2015 at 04:17:51PM +0530, Mugunthan V N wrote:

> Import various DT files for am4372, an43xx pinctrl and
> am437x-gp-evm from Linux Kernel v4.2
> Add config file for this board, enable DM, DM_GPIO, DM_SERIAL
> and DM_MMC.
> 
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
> Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>

Applied to u-boot/master, thanks!
diff mbox

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 5f10243..716b5b7 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -61,6 +61,7 @@  dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \
 	zynq-zc770-xm012.dtb \
 	zynq-zc770-xm013.dtb
 dtb-$(CONFIG_AM33XX) += am335x-boneblack.dtb am335x-evm.dtb
+dtb-$(CONFIG_AM43XX) += am437x-gp-evm.dtb
 
 dtb-$(CONFIG_ARCH_SOCFPGA) +=				\
 	socfpga_arria5_socdk.dtb			\
diff --git a/arch/arm/dts/am4372.dtsi b/arch/arm/dts/am4372.dtsi
new file mode 100644
index 0000000..ade28c7
--- /dev/null
+++ b/arch/arm/dts/am4372.dtsi
@@ -0,0 +1,999 @@ 
+/*
+ * Device Tree Source for AM4372 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+#include "skeleton.dtsi"
+
+/ {
+	compatible = "ti,am4372", "ti,am43";
+	interrupt-parent = <&wakeupgen>;
+
+
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		serial0 = &uart0;
+		ethernet0 = &cpsw_emac0;
+		ethernet1 = &cpsw_emac1;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu: cpu@0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			reg = <0>;
+
+			clocks = <&dpll_mpu_ck>;
+			clock-names = "cpu";
+
+			clock-latency = <300000>; /* From omap-cpufreq driver */
+		};
+	};
+
+	gic: interrupt-controller@48241000 {
+		compatible = "arm,cortex-a9-gic";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48241000 0x1000>,
+		      <0x48240100 0x0100>;
+		interrupt-parent = <&gic>;
+	};
+
+	wakeupgen: interrupt-controller@48281000 {
+		compatible = "ti,omap4-wugen-mpu";
+		interrupt-controller;
+		#interrupt-cells = <3>;
+		reg = <0x48281000 0x1000>;
+		interrupt-parent = <&gic>;
+	};
+
+	l2-cache-controller@48242000 {
+		compatible = "arm,pl310-cache";
+		reg = <0x48242000 0x1000>;
+		cache-unified;
+		cache-level = <2>;
+	};
+
+	ocp {
+		compatible = "ti,am4372-l3-noc", "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		ti,hwmods = "l3_main";
+		reg = <0x44000000 0x400000
+		       0x44800000 0x400000>;
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+
+		l4_wkup: l4_wkup@44c00000 {
+			compatible = "ti,am4-l4-wkup", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x44c00000 0x287000>;
+
+			prcm: prcm@1f0000 {
+				compatible = "ti,am4-prcm";
+				reg = <0x1f0000 0x11000>;
+
+				prcm_clocks: clocks {
+					#address-cells = <1>;
+					#size-cells = <0>;
+				};
+
+				prcm_clockdomains: clockdomains {
+				};
+			};
+
+			scm: scm@210000 {
+				compatible = "ti,am4-scm", "simple-bus";
+				reg = <0x210000 0x4000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x210000 0x4000>;
+
+				am43xx_pinmux: pinmux@800 {
+					compatible = "ti,am437-padconf",
+						     "pinctrl-single";
+					reg = <0x800 0x31c>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					#interrupt-cells = <1>;
+					interrupt-controller;
+					pinctrl-single,register-width = <32>;
+					pinctrl-single,function-mask = <0xffffffff>;
+				};
+
+				scm_conf: scm_conf@0 {
+					compatible = "syscon";
+					reg = <0x0 0x800>;
+					#address-cells = <1>;
+					#size-cells = <1>;
+
+					scm_clocks: clocks {
+						#address-cells = <1>;
+						#size-cells = <0>;
+					};
+				};
+
+				scm_clockdomains: clockdomains {
+				};
+			};
+		};
+
+		emif: emif@4c000000 {
+			compatible = "ti,emif-am4372";
+			reg = <0x4c000000 0x1000000>;
+			ti,hwmods = "emif";
+		};
+
+		edma: edma@49000000 {
+			compatible = "ti,edma3";
+			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+			reg =	<0x49000000 0x10000>,
+				<0x44e10f90 0x10>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			#dma-cells = <1>;
+		};
+
+		uart0: serial@44e09000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x44e09000 0x2000>;
+			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart1";
+		};
+
+		uart1: serial@48022000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48022000 0x2000>;
+			interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart2";
+			status = "disabled";
+		};
+
+		uart2: serial@48024000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x48024000 0x2000>;
+			interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart3";
+			status = "disabled";
+		};
+
+		uart3: serial@481a6000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a6000 0x2000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart4";
+			status = "disabled";
+		};
+
+		uart4: serial@481a8000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481a8000 0x2000>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart5";
+			status = "disabled";
+		};
+
+		uart5: serial@481aa000 {
+			compatible = "ti,am4372-uart","ti,omap2-uart";
+			reg = <0x481aa000 0x2000>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "uart6";
+			status = "disabled";
+		};
+
+		mailbox: mailbox@480C8000 {
+			compatible = "ti,omap4-mailbox";
+			reg = <0x480C8000 0x200>;
+			interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "mailbox";
+			#mbox-cells = <1>;
+			ti,mbox-num-users = <4>;
+			ti,mbox-num-fifos = <8>;
+			mbox_wkupm3: wkup_m3 {
+				ti,mbox-tx = <0 0 0>;
+				ti,mbox-rx = <0 0 3>;
+			};
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,am4372-timer-1ms","ti,am335x-timer-1ms";
+			reg = <0x44e31000 0x400>;
+			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-alwon;
+			ti,hwmods = "timer1";
+		};
+
+		timer2: timer@48040000  {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48040000  0x400>;
+			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer3";
+			status = "disabled";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer4";
+			status = "disabled";
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer5";
+			status = "disabled";
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer6";
+			status = "disabled";
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+			ti,timer-pwm;
+			ti,hwmods = "timer7";
+			status = "disabled";
+		};
+
+		timer8: timer@481c1000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x481c1000 0x400>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer8";
+			status = "disabled";
+		};
+
+		timer9: timer@4833d000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833d000 0x400>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer9";
+			status = "disabled";
+		};
+
+		timer10: timer@4833f000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x4833f000 0x400>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer10";
+			status = "disabled";
+		};
+
+		timer11: timer@48341000 {
+			compatible = "ti,am4372-timer","ti,am335x-timer";
+			reg = <0x48341000 0x400>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "timer11";
+			status = "disabled";
+		};
+
+		counter32k: counter@44e86000 {
+			compatible = "ti,am4372-counter32k","ti,omap-counter32k";
+			reg = <0x44e86000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
+		rtc: rtc@44e3e000 {
+			compatible = "ti,am4372-rtc","ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "rtc";
+			status = "disabled";
+		};
+
+		wdt: wdt@44e35000 {
+			compatible = "ti,am4372-wdt","ti,omap3-wdt";
+			reg = <0x44e35000 0x1000>;
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "wd_timer2";
+		};
+
+		gpio0: gpio@44e07000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x44e07000 0x1000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio1";
+			status = "disabled";
+		};
+
+		gpio1: gpio@4804c000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x4804c000 0x1000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio2";
+			status = "disabled";
+		};
+
+		gpio2: gpio@481ac000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ac000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio3";
+			status = "disabled";
+		};
+
+		gpio3: gpio@481ae000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x481ae000 0x1000>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio4";
+			status = "disabled";
+		};
+
+		gpio4: gpio@48320000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48320000 0x1000>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio5";
+			status = "disabled";
+		};
+
+		gpio5: gpio@48322000 {
+			compatible = "ti,am4372-gpio","ti,omap4-gpio";
+			reg = <0x48322000 0x1000>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			ti,hwmods = "gpio6";
+			status = "disabled";
+		};
+
+		hwspinlock: spinlock@480ca000 {
+			compatible = "ti,omap4-hwspinlock";
+			reg = <0x480ca000 0x1000>;
+			ti,hwmods = "spinlock";
+			#hwlock-cells = <1>;
+		};
+
+		i2c0: i2c@44e0b000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x44e0b000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4802a000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4802a000 0x1000>;
+			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4819c000 {
+			compatible = "ti,am4372-i2c","ti,omap4-i2c";
+			reg = <0x4819c000 0x1000>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "i2c3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48030000 0x400>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi0";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mmc1: mmc@48060000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x48060000 0x1000>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			ti,needs-special-reset;
+			dmas = <&edma 24
+				&edma 25>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc2: mmc@481d8000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x481d8000 0x1000>;
+			ti,hwmods = "mmc2";
+			ti,needs-special-reset;
+			dmas = <&edma 2
+				&edma 3>;
+			dma-names = "tx", "rx";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		mmc3: mmc@47810000 {
+			compatible = "ti,omap4-hsmmc";
+			reg = <0x47810000 0x1000>;
+			ti,hwmods = "mmc3";
+			ti,needs-special-reset;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a0000 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi1";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi2: spi@481a2000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a2000 0x400>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi2";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi3: spi@481a4000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x481a4000 0x400>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi3";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi4: spi@48345000 {
+			compatible = "ti,am4372-mcspi","ti,omap4-mcspi";
+			reg = <0x48345000 0x400>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "spi4";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		mac: ethernet@4a100000 {
+			compatible = "ti,am4372-cpsw","ti,cpsw";
+			reg = <0x4a100000 0x800
+			       0x4a101200 0x100>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH
+				      GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,hwmods = "cpgmac0";
+			clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
+			clock-names = "fck", "cpts";
+			status = "disabled";
+			cpdma_channels = <8>;
+			ale_entries = <1024>;
+			bd_ram_size = <0x2000>;
+			no_bd_ram = <0>;
+			rx_descs = <64>;
+			mac_control = <0x20>;
+			slaves = <2>;
+			active_slave = <0>;
+			cpts_clock_mult = <0x80000000>;
+			cpts_clock_shift = <29>;
+			ranges;
+
+			davinci_mdio: mdio@4a101000 {
+				compatible = "ti,am4372-mdio","ti,davinci_mdio";
+				reg = <0x4a101000 0x100>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				ti,hwmods = "davinci_mdio";
+				bus_freq = <1000000>;
+				status = "disabled";
+			};
+
+			cpsw_emac0: slave@4a100200 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			cpsw_emac1: slave@4a100300 {
+				/* Filled in by U-Boot */
+				mac-address = [ 00 00 00 00 00 00 ];
+			};
+
+			phy_sel: cpsw-phy-sel@44e10650 {
+				compatible = "ti,am43xx-cpsw-phy-sel";
+				reg= <0x44e10650 0x4>;
+				reg-names = "gmii-sel";
+			};
+		};
+
+		epwmss0: epwmss@48300000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48300000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss0";
+			status = "disabled";
+
+			ecap0: ecap@48300100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48300100 0x80>;
+				ti,hwmods = "ecap0";
+				status = "disabled";
+			};
+
+			ehrpwm0: ehrpwm@48300200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48300200 0x80>;
+				ti,hwmods = "ehrpwm0";
+				status = "disabled";
+			};
+		};
+
+		epwmss1: epwmss@48302000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48302000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss1";
+			status = "disabled";
+
+			ecap1: ecap@48302100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48302100 0x80>;
+				ti,hwmods = "ecap1";
+				status = "disabled";
+			};
+
+			ehrpwm1: ehrpwm@48302200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48302200 0x80>;
+				ti,hwmods = "ehrpwm1";
+				status = "disabled";
+			};
+		};
+
+		epwmss2: epwmss@48304000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48304000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss2";
+			status = "disabled";
+
+			ecap2: ecap@48304100 {
+				compatible = "ti,am4372-ecap","ti,am33xx-ecap";
+				#pwm-cells = <3>;
+				reg = <0x48304100 0x80>;
+				ti,hwmods = "ecap2";
+				status = "disabled";
+			};
+
+			ehrpwm2: ehrpwm@48304200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48304200 0x80>;
+				ti,hwmods = "ehrpwm2";
+				status = "disabled";
+			};
+		};
+
+		epwmss3: epwmss@48306000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48306000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss3";
+			status = "disabled";
+
+			ehrpwm3: ehrpwm@48306200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48306200 0x80>;
+				ti,hwmods = "ehrpwm3";
+				status = "disabled";
+			};
+		};
+
+		epwmss4: epwmss@48308000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x48308000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss4";
+			status = "disabled";
+
+			ehrpwm4: ehrpwm@48308200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x48308200 0x80>;
+				ti,hwmods = "ehrpwm4";
+				status = "disabled";
+			};
+		};
+
+		epwmss5: epwmss@4830a000 {
+			compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+			reg = <0x4830a000 0x10>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "epwmss5";
+			status = "disabled";
+
+			ehrpwm5: ehrpwm@4830a200 {
+				compatible = "ti,am4372-ehrpwm","ti,am33xx-ehrpwm";
+				#pwm-cells = <3>;
+				reg = <0x4830a200 0x80>;
+				ti,hwmods = "ehrpwm5";
+				status = "disabled";
+			};
+		};
+
+		tscadc: tscadc@44e0d000 {
+			compatible = "ti,am3359-tscadc";
+			reg = <0x44e0d000 0x1000>;
+			ti,hwmods = "adc_tsc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&adc_tsc_fck>;
+			clock-names = "fck";
+			status = "disabled";
+
+			tsc {
+				compatible = "ti,am3359-tsc";
+			};
+
+			adc {
+				#io-channel-cells = <1>;
+				compatible = "ti,am3359-adc";
+			};
+
+		};
+
+		sham: sham@53100000 {
+			compatible = "ti,omap5-sham";
+			ti,hwmods = "sham";
+			reg = <0x53100000 0x300>;
+			dmas = <&edma 36>;
+			dma-names = "rx";
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		aes: aes@53501000 {
+			compatible = "ti,omap4-aes";
+			ti,hwmods = "aes";
+			reg = <0x53501000 0xa0>;
+			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 6
+				&edma 5>;
+			dma-names = "tx", "rx";
+		};
+
+		des: des@53701000 {
+			compatible = "ti,omap4-des";
+			ti,hwmods = "des";
+			reg = <0x53701000 0xa0>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			dmas = <&edma 34
+				&edma 33>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp0: mcasp@48038000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp0";
+			reg = <0x48038000 0x2000>,
+			      <0x46000000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <80>, <81>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 8>,
+			       <&edma 9>;
+			dma-names = "tx", "rx";
+		};
+
+		mcasp1: mcasp@4803C000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			ti,hwmods = "mcasp1";
+			reg = <0x4803C000 0x2000>,
+			      <0x46400000 0x400000>;
+			reg-names = "mpu", "dat";
+			interrupts = <82>, <83>;
+			interrupt-names = "tx", "rx";
+			status = "disabled";
+			dmas = <&edma 10>,
+			       <&edma 11>;
+			dma-names = "tx", "rx";
+		};
+
+		elm: elm@48080000 {
+			compatible = "ti,am3352-elm";
+			reg = <0x48080000 0x2000>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "elm";
+			clocks = <&l4ls_gclk>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		gpmc: gpmc@50000000 {
+			compatible = "ti,am3352-gpmc";
+			ti,hwmods = "gpmc";
+			clocks = <&l3s_gclk>;
+			clock-names = "fck";
+			reg = <0x50000000 0x2000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
+			#address-cells = <2>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
+		am43xx_control_usb2phy1: control-phy@44e10620 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10620 0x4>;
+			reg-names = "power";
+		};
+
+		am43xx_control_usb2phy2: control-phy@0x44e10628 {
+			compatible = "ti,control-phy-usb2-am437";
+			reg = <0x44e10628 0x4>;
+			reg-names = "power";
+		};
+
+		ocp2scp0: ocp2scp@483a8000 {
+			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp0";
+
+			usb2_phy1: phy@483a8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483a8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy1>;
+				clocks = <&usb_phy0_always_on_clk32k>,
+					 <&usb_otg_ss0_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		ocp2scp1: ocp2scp@483e8000 {
+			compatible = "ti,am437x-ocp2scp", "ti,omap-ocp2scp";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			ti,hwmods = "ocp2scp1";
+
+			usb2_phy2: phy@483e8000 {
+				compatible = "ti,am437x-usb2";
+				reg = <0x483e8000 0x8000>;
+				ctrl-module = <&am43xx_control_usb2phy2>;
+				clocks = <&usb_phy1_always_on_clk32k>,
+					 <&usb_otg_ss1_refclk960m>;
+				clock-names = "wkupclk", "refclk";
+				#phy-cells = <0>;
+				status = "disabled";
+			};
+		};
+
+		dwc3_1: omap_dwc3@48380000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss0";
+			reg = <0x48380000 0x10000>;
+			interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb1: usb@48390000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x48390000 0x10000>;
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy1>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		dwc3_2: omap_dwc3@483c0000 {
+			compatible = "ti,am437x-dwc3";
+			ti,hwmods = "usb_otg_ss1";
+			reg = <0x483c0000 0x10000>;
+			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			utmi-mode = <1>;
+			ranges;
+
+			usb2: usb@483d0000 {
+				compatible = "synopsys,dwc3";
+				reg = <0x483d0000 0x10000>;
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usb2_phy2>;
+				phy-names = "usb2-phy";
+				maximum-speed = "high-speed";
+				dr_mode = "otg";
+				status = "disabled";
+				snps,dis_u3_susphy_quirk;
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+
+		qspi: qspi@47900000 {
+			compatible = "ti,am4372-qspi";
+			reg = <0x47900000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			ti,hwmods = "qspi";
+			interrupts = <0 138 0x4>;
+			num-cs = <4>;
+			status = "disabled";
+		};
+
+		hdq: hdq@48347000 {
+			compatible = "ti,am4372-hdq";
+			reg = <0x48347000 0x1000>;
+			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&func_12m_clk>;
+			clock-names = "fck";
+			ti,hwmods = "hdq1w";
+			status = "disabled";
+		};
+
+		dss: dss@4832a000 {
+			compatible = "ti,omap3-dss";
+			reg = <0x4832a000 0x200>;
+			status = "disabled";
+			ti,hwmods = "dss_core";
+			clocks = <&disp_clk>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			dispc: dispc@4832a400 {
+				compatible = "ti,omap3-dispc";
+				reg = <0x4832a400 0x400>;
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				ti,hwmods = "dss_dispc";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+			};
+
+			rfbi: rfbi@4832a800 {
+				compatible = "ti,omap3-rfbi";
+				reg = <0x4832a800 0x100>;
+				ti,hwmods = "dss_rfbi";
+				clocks = <&disp_clk>;
+				clock-names = "fck";
+				status = "disabled";
+			};
+		};
+
+		ocmcram: ocmcram@40300000 {
+			compatible = "mmio-sram";
+			reg = <0x40300000 0x40000>; /* 256k */
+		};
+
+		dcan0: can@481cc000 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			ti,hwmods = "d_can0";
+			clocks = <&dcan0_fck>;
+			clock-names = "fck";
+			reg = <0x481cc000 0x2000>;
+			syscon-raminit = <&scm_conf 0x644 0>;
+			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		dcan1: can@481d0000 {
+			compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+			ti,hwmods = "d_can1";
+			clocks = <&dcan1_fck>;
+			clock-names = "fck";
+			reg = <0x481d0000 0x2000>;
+			syscon-raminit = <&scm_conf 0x644 1>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		vpfe0: vpfe@48326000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48326000 0x2000>;
+			interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe0";
+			status = "disabled";
+		};
+
+		vpfe1: vpfe@48328000 {
+			compatible = "ti,am437x-vpfe";
+			reg = <0x48328000 0x2000>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			ti,hwmods = "vpfe1";
+			status = "disabled";
+		};
+	};
+};
+
+/include/ "am43xx-clocks.dtsi"
diff --git a/arch/arm/dts/am437x-gp-evm.dts b/arch/arm/dts/am437x-gp-evm.dts
new file mode 100644
index 0000000..b5f0b4e
--- /dev/null
+++ b/arch/arm/dts/am437x-gp-evm.dts
@@ -0,0 +1,797 @@ 
+/*
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* AM437x GP EVM */
+
+/dts-v1/;
+
+#include "am4372.dtsi"
+#include <dt-bindings/pinctrl/am43xx.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "TI AM437x GP EVM";
+	compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
+
+	aliases {
+		display0 = &lcd0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart0;
+	};
+
+	vmmcsd_fixed: fixedregulator-sd {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcsd_fixed";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 51 53 56 62 75 101 152 255>;
+		default-brightness-level = <8>;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
+				&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
+				&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
+
+		col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
+				&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
+
+		linux,keymap = <0x00000201      /* P1 */
+				0x00010202      /* P2 */
+				0x01000067      /* UP */
+				0x0101006a      /* RIGHT */
+				0x02000069      /* LEFT */
+				0x0201006c>;      /* DOWN */
+		};
+
+	lcd0: display {
+		compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
+		label = "lcd";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pins>;
+
+		/*
+		 * SelLCDorHDMI, LOW to select HDMI. This is not really the
+		 * panel's enable GPIO, but we don't have HDMI driver support nor
+		 * support to switch between two displays, so using this gpio as
+		 * panel's enable should be safe.
+		 */
+		enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
+
+		panel-timing {
+			clock-frequency = <33000000>;
+			hactive = <800>;
+			vactive = <480>;
+			hfront-porch = <210>;
+			hback-porch = <16>;
+			hsync-len = <30>;
+			vback-porch = <10>;
+			vfront-porch = <22>;
+			vsync-len = <13>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+			de-active = <1>;
+			pixelclk-active = <1>;
+		};
+
+		port {
+			lcd_in: endpoint {
+				remote-endpoint = <&dpi_out>;
+			};
+		};
+	};
+
+	/* fixed 12MHz oscillator */
+	refclk: oscillator {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <12000000>;
+	};
+
+};
+
+&am43xx_pinmux {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&wlan_pins_default>;
+	pinctrl-1 = <&wlan_pins_sleep>;
+
+	i2c0_pins: i2c0_pins {
+		pinctrl-single,pins = <
+			0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_sda.i2c0_sda */
+			0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)  /* i2c0_scl.i2c0_scl */
+		>;
+	};
+
+	i2c1_pins: i2c1_pins {
+		pinctrl-single,pins = <
+			0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_cs0.i2c1_scl */
+			0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2)  /* spi0_d1.i2c1_sda  */
+		>;
+	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
+	ecap0_pins: backlight_pins {
+		pinctrl-single,pins = <
+			0x164 MUX_MODE0       /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
+		>;
+	};
+
+	pixcir_ts_pins: pixcir_ts_pins {
+		pinctrl-single,pins = <
+			0x264 (PIN_INPUT_PULLUP | MUX_MODE7)  /* spi2_d0.gpio3_22 */
+		>;
+	};
+
+	cpsw_default: cpsw_default {
+		pinctrl-single,pins = <
+			/* Slave 1 */
+			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txen.rgmii1_txen */
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxdv.rgmii1_rxctl */
+			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd3 */
+			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd2 */
+			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd1.rgmii1_txd1 */
+			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txd0.rgmii1_txd0 */
+			0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2)	/* mii1_txclk.rmii1_tclk */
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxclk.rmii1_rclk */
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd3 */
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd2 */
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd1.rgmii1_rxd1 */
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* mii1_rxd0.rgmii1_rxd0 */
+		>;
+	};
+
+	cpsw_sleep: cpsw_sleep {
+		pinctrl-single,pins = <
+			/* Slave 1 reset value */
+			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	davinci_mdio_default: davinci_mdio_default {
+		pinctrl-single,pins = <
+			/* MDIO */
+			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
+			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
+		>;
+	};
+
+	davinci_mdio_sleep: davinci_mdio_sleep {
+		pinctrl-single,pins = <
+			/* MDIO reset value */
+			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+		>;
+	};
+
+	nand_flash_x8: nand_flash_x8 {
+		pinctrl-single,pins = <
+			0x26c(PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* spi2_cs0.gpio/eMMCorNANDsel */
+			0x0  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
+			0x4  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
+			0x8  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
+			0xc  (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
+			0x10 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
+			0x14 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
+			0x18 (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
+			0x1c (PIN_INPUT  | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
+			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
+			0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpmc_wpn */
+			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
+			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
+			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
+			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
+			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
+		>;
+	};
+
+	dss_pins: dss_pins {
+		pinctrl-single,pins = <
+			0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
+			0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1)
+			0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
+			0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
+			0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0)
+			0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
+			0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
+			0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
+			0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
+			0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
+
+		>;
+	};
+
+	lcd_pins: lcd_pins {
+		pinctrl-single,pins = <
+			/* GPIO 5_8 to select LCD / HDMI */
+			0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
+		>;
+	};
+
+	dcan0_default: dcan0_default_pins {
+		pinctrl-single,pins = <
+			0x178 (PIN_OUTPUT | MUX_MODE2)		/* uart1_ctsn.d_can0_tx */
+			0x17c (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_rtsn.d_can0_rx */
+		>;
+	};
+
+	dcan1_default: dcan1_default_pins {
+		pinctrl-single,pins = <
+			0x180 (PIN_OUTPUT | MUX_MODE2)		/* uart1_rxd.d_can1_tx */
+			0x184 (PIN_INPUT_PULLUP | MUX_MODE2)	/* uart1_txd.d_can1_rx */
+		>;
+	};
+
+	vpfe0_pins_default: vpfe0_pins_default {
+		pinctrl-single,pins = <
+			0x1B0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_hd mode 0*/
+			0x1B4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_vd mode 0*/
+			0x1C0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_pclk mode 0*/
+			0x1C4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data8 mode 0*/
+			0x1C8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data9 mode 0*/
+			0x208 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data0 mode 0*/
+			0x20C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data1 mode 0*/
+			0x210 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data2 mode 0*/
+			0x214 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data3 mode 0*/
+			0x218 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data4 mode 0*/
+			0x21C (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data5 mode 0*/
+			0x220 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data6 mode 0*/
+			0x224 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe0_pins_sleep: vpfe0_pins_sleep {
+		pinctrl-single,pins = <
+			0x1B0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_hd mode 0*/
+			0x1B4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_vd mode 0*/
+			0x1C0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_pclk mode 0*/
+			0x1C4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data8 mode 0*/
+			0x1C8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data9 mode 0*/
+			0x208 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data0 mode 0*/
+			0x20C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data1 mode 0*/
+			0x210 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data2 mode 0*/
+			0x214 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data3 mode 0*/
+			0x218 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data4 mode 0*/
+			0x21C (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data5 mode 0*/
+			0x220 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data6 mode 0*/
+			0x224 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam0_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_default: vpfe1_pins_default {
+		pinctrl-single,pins = <
+			0x1CC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data9 mode 0*/
+			0x1D0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data8 mode 0*/
+			0x1D4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_hd mode 0*/
+			0x1D8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_vd mode 0*/
+			0x1DC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_pclk mode 0*/
+			0x1E8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data0 mode 0*/
+			0x1EC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data1 mode 0*/
+			0x1F0 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data2 mode 0*/
+			0x1F4 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data3 mode 0*/
+			0x1F8 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data4 mode 0*/
+			0x1FC (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data5 mode 0*/
+			0x200 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data6 mode 0*/
+			0x204 (PIN_INPUT_PULLUP | MUX_MODE0)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	vpfe1_pins_sleep: vpfe1_pins_sleep {
+		pinctrl-single,pins = <
+			0x1CC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data9 mode 0*/
+			0x1D0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data8 mode 0*/
+			0x1D4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_hd mode 0*/
+			0x1D8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_vd mode 0*/
+			0x1DC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_pclk mode 0*/
+			0x1E8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data0 mode 0*/
+			0x1EC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data1 mode 0*/
+			0x1F0 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data2 mode 0*/
+			0x1F4 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data3 mode 0*/
+			0x1F8 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data4 mode 0*/
+			0x1FC (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data5 mode 0*/
+			0x200 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data6 mode 0*/
+			0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)  /* cam1_data7 mode 0*/
+		>;
+	};
+
+	mmc3_pins_default: pinmux_mmc3_pins_default {
+		pinctrl-single,pins = <
+			0x8c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_clk.mmc2_clk */
+			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_csn3.mmc2_cmd */
+			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)      /* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
+		pinctrl-single,pins = <
+			0x8c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_clk.mmc2_clk */
+			0x88 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.mmc2_cmd */
+			0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a1.mmc2_dat0 */
+			0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a2.mmc2_dat1 */
+			0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a3.mmc2_dat2 */
+			0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_be1n.mmc2_dat3 */
+		>;
+	};
+
+	wlan_pins_default: pinmux_wlan_pins_default {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	wlan_pins_sleep: pinmux_wlan_pins_sleep {
+		pinctrl-single,pins = <
+			0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)		/* gpmc_a4.gpio1_20 WL_EN */
+			0x5c (PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7)	/* gpmc_a7.gpio1_23 WL_IRQ*/
+			0x40 (PIN_OUTPUT_PULLUP | MUX_MODE7)		/* gpmc_a0.gpio1_16 BT_EN*/
+		>;
+	};
+
+	uart3_pins: uart3_pins {
+		pinctrl-single,pins = <
+			0x228 (PIN_INPUT | MUX_MODE0)		/* uart3_rxd.uart3_rxd */
+			0x22c (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
+			0x230 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart3_ctsn.uart3_ctsn */
+			0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
+		>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	clock-frequency = <100000>;
+
+	tps65218: tps65218@24 {
+		reg = <0x24>;
+		compatible = "ti,tps65218";
+		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		dcdc1: regulator-dcdc1 {
+			compatible = "ti,tps65218-dcdc1";
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1144000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc2: regulator-dcdc2 {
+			compatible = "ti,tps65218-dcdc2";
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <1378000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		dcdc3: regulator-dcdc3 {
+			compatible = "ti,tps65218-dcdc3";
+			regulator-name = "vdcdc3";
+			regulator-min-microvolt = <1500000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+		dcdc5: regulator-dcdc5 {
+			compatible = "ti,tps65218-dcdc5";
+			regulator-name = "v1_0bat";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		dcdc6: regulator-dcdc6 {
+			compatible = "ti,tps65218-dcdc6";
+			regulator-name = "v1_8bat";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		ldo1: regulator-ldo1 {
+			compatible = "ti,tps65218-ldo1";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_0: endpoint {
+				remote-endpoint = <&vpfe1_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	pixcir_ts@5c {
+		compatible = "pixcir,pixcir_tangoc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pixcir_ts_pins>;
+		reg = <0x5c>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <22 0>;
+
+		attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+
+		touchscreen-size-x = <1024>;
+		touchscreen-size-y = <600>;
+	};
+
+	ov2659@30 {
+		compatible = "ovti,ov2659";
+		reg = <0x30>;
+
+		clocks = <&refclk 0>;
+		clock-names = "xvclk";
+
+		port {
+			ov2659_1: endpoint {
+				remote-endpoint = <&vpfe0_ep>;
+				link-frequencies = /bits/ 64 <70000000>;
+			};
+		};
+	};
+};
+
+&epwmss0 {
+	status = "okay";
+};
+
+&tscadc {
+	status = "okay";
+
+	adc {
+		ti,adc-channels = <0 1 2 3 4 5 6 7>;
+	};
+};
+
+&ecap0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ecap0_pins>;
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&gpio1 {
+	status = "okay";
+};
+
+&gpio3 {
+	status = "okay";
+};
+
+&gpio4 {
+	status = "okay";
+};
+
+&gpio5 {
+	status = "okay";
+	ti,no-reset-on-init;
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vmmcsd_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
+};
+
+&mmc3 {
+	/* disable MMC3 as SDIO is not supported in U-Boot */
+	status = "disabled";
+	/* these are on the crossbar and are outlined in the
+	   xbar-event-map element */
+	dmas = <&edma 30
+		&edma 31>;
+	dma-names = "tx", "rx";
+	vmmc-supply = <&vmmcwl_fixed>;
+	bus-width = <4>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_sleep>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	ti,non-removable;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@0 {
+		compatible = "ti,wl1835";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&edma {
+	ti,edma-xbar-event-map = /bits/ 16 <1 30
+					    2 31>;
+};
+
+&uart3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart3_pins>;
+};
+
+&usb2_phy1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usb2_phy2 {
+	status = "okay";
+};
+
+&usb2 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&mac {
+	slaves = <1>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&cpsw_default>;
+	pinctrl-1 = <&cpsw_sleep>;
+	status = "okay";
+};
+
+&davinci_mdio {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&davinci_mdio_default>;
+	pinctrl-1 = <&davinci_mdio_sleep>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy_id = <&davinci_mdio>, <0>;
+	phy-mode = "rgmii";
+};
+
+&elm {
+	status = "okay";
+};
+
+&gpmc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&nand_flash_x8>;
+	ranges = <0 0 0 0x01000000>;	/* minimum GPMC partition = 16MB */
+	nand@0,0 {
+		reg = <0 0 4>;		/* device IO registers */
+		ti,nand-ecc-opt = "bch16";
+		ti,elm-id = <&elm>;
+		nand-bus-width = <8>;
+		gpmc,device-width = <1>;
+		gpmc,sync-clk-ps = <0>;
+		gpmc,cs-on-ns = <0>;
+		gpmc,cs-rd-off-ns = <40>;
+		gpmc,cs-wr-off-ns = <40>;
+		gpmc,adv-on-ns = <0>;
+		gpmc,adv-rd-off-ns = <25>;
+		gpmc,adv-wr-off-ns = <25>;
+		gpmc,we-on-ns = <0>;
+		gpmc,we-off-ns = <20>;
+		gpmc,oe-on-ns = <3>;
+		gpmc,oe-off-ns = <30>;
+		gpmc,access-ns = <30>;
+		gpmc,rd-cycle-ns = <40>;
+		gpmc,wr-cycle-ns = <40>;
+		gpmc,wait-pin = <0>;
+		gpmc,bus-turnaround-ns = <0>;
+		gpmc,cycle2cycle-delay-ns = <0>;
+		gpmc,clk-activation-ns = <0>;
+		gpmc,wait-monitoring-ns = <0>;
+		gpmc,wr-access-ns = <40>;
+		gpmc,wr-data-mux-bus-ns = <0>;
+		/* MTD partition table */
+		/* All SPL-* partitions are sized to minimal length
+		 * which can be independently programmable. For
+		 * NAND flash this is equal to size of erase-block */
+		#address-cells = <1>;
+		#size-cells = <1>;
+		partition@0 {
+			label = "NAND.SPL";
+			reg = <0x00000000 0x00040000>;
+		};
+		partition@1 {
+			label = "NAND.SPL.backup1";
+			reg = <0x00040000 0x00040000>;
+		};
+		partition@2 {
+			label = "NAND.SPL.backup2";
+			reg = <0x00080000 0x00040000>;
+		};
+		partition@3 {
+			label = "NAND.SPL.backup3";
+			reg = <0x000c0000 0x00040000>;
+		};
+		partition@4 {
+			label = "NAND.u-boot-spl-os";
+			reg = <0x00100000 0x00080000>;
+		};
+		partition@5 {
+			label = "NAND.u-boot";
+			reg = <0x00180000 0x00100000>;
+		};
+		partition@6 {
+			label = "NAND.u-boot-env";
+			reg = <0x00280000 0x00040000>;
+		};
+		partition@7 {
+			label = "NAND.u-boot-env.backup1";
+			reg = <0x002c0000 0x00040000>;
+		};
+		partition@8 {
+			label = "NAND.kernel";
+			reg = <0x00300000 0x00700000>;
+		};
+		partition@9 {
+			label = "NAND.file-system";
+			reg = <0x00a00000 0x1f600000>;
+		};
+	};
+};
+
+&dss {
+	status = "ok";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&dss_pins>;
+
+	port {
+		dpi_out: endpoint@0 {
+			remote-endpoint = <&lcd_in>;
+			data-lines = <24>;
+		};
+	};
+};
+
+&dcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan0_default>;
+	status = "okay";
+};
+
+&dcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&dcan1_default>;
+	status = "okay";
+};
+
+&vpfe0 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe0_pins_default>;
+	pinctrl-1 = <&vpfe0_pins_sleep>;
+
+	port {
+		vpfe0_ep: endpoint {
+			remote-endpoint = <&ov2659_1>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
+
+&vpfe1 {
+	status = "okay";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&vpfe1_pins_default>;
+	pinctrl-1 = <&vpfe1_pins_sleep>;
+
+	port {
+		vpfe1_ep: endpoint {
+			remote-endpoint = <&ov2659_0>;
+			ti,am437x-vpfe-interface = <0>;
+			bus-width = <8>;
+			hsync-active = <0>;
+			vsync-active = <0>;
+		};
+	};
+};
diff --git a/arch/arm/dts/am43xx-clocks.dtsi b/arch/arm/dts/am43xx-clocks.dtsi
new file mode 100644
index 0000000..d0c0dfa
--- /dev/null
+++ b/arch/arm/dts/am43xx-clocks.dtsi
@@ -0,0 +1,757 @@ 
+/*
+ * Device Tree Source for AM43xx clock data
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+&scm_clocks {
+	sys_clkin_ck: sys_clkin_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysboot_freq_sel_ck>, <&crystal_freq_sel_ck>;
+		ti,bit-shift = <31>;
+		reg = <0x0040>;
+	};
+
+	crystal_freq_sel_ck: crystal_freq_sel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <29>;
+		reg = <0x0040>;
+	};
+
+	sysboot_freq_sel_ck: sysboot_freq_sel_ck@44e10040 {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&virt_19200000_ck>, <&virt_24000000_ck>, <&virt_25000000_ck>, <&virt_26000000_ck>;
+		ti,bit-shift = <22>;
+		reg = <0x0040>;
+	};
+
+	adc_tsc_fck: adc_tsc_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan0_fck: dcan0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dcan1_fck: dcan1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp0_fck: mcasp0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	mcasp1_fck: mcasp1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex0_fck: smartreflex0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	smartreflex1_fck: smartreflex1_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	sha0_fck: sha0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	aes0_fck: aes0_fck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	ehrpwm0_tbclk: ehrpwm0_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <0>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm1_tbclk: ehrpwm1_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <1>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm2_tbclk: ehrpwm2_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <2>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm3_tbclk: ehrpwm3_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <4>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm4_tbclk: ehrpwm4_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <5>;
+		reg = <0x0664>;
+	};
+
+	ehrpwm5_tbclk: ehrpwm5_tbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&l4ls_gclk>;
+		ti,bit-shift = <6>;
+		reg = <0x0664>;
+	};
+};
+&prcm_clocks {
+	clk_32768_ck: clk_32768_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	clk_rc32k_ck: clk_rc32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	virt_19200000_ck: virt_19200000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+	};
+
+	virt_24000000_ck: virt_24000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	virt_25000000_ck: virt_25000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+	};
+
+	virt_26000000_ck: virt_26000000_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	tclkin_ck: tclkin_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <26000000>;
+	};
+
+	dpll_core_ck: dpll_core_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-core-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d20>, <0x2d24>, <0x2d2c>;
+	};
+
+	dpll_core_x2_ck: dpll_core_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_core_ck>;
+	};
+
+	dpll_core_m4_ck: dpll_core_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d38>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m5_ck: dpll_core_m5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d3c>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_core_m6_ck: dpll_core_m6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_core_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d40>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_mpu_ck: dpll_mpu_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2d60>, <0x2d64>, <0x2d6c>;
+	};
+
+	dpll_mpu_m2_ck: dpll_mpu_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_mpu_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2d70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_ddr_ck: dpll_ddr_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2da0>, <0x2da4>, <0x2dac>;
+	};
+
+	dpll_ddr_m2_ck: dpll_ddr_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_disp_ck: dpll_disp_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e20>, <0x2e24>, <0x2e2c>;
+	};
+
+	dpll_disp_m2_ck: dpll_disp_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_disp_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e30>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+		ti,set-rate-parent;
+	};
+
+	dpll_per_ck: dpll_per_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-j-type-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2de0>, <0x2de4>, <0x2dec>;
+	};
+
+	dpll_per_m2_ck: dpll_per_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_per_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2df0>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_m2_div4_wkupdm_ck: dpll_per_m2_div4_wkupdm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	dpll_per_m2_div4_ck: dpll_per_m2_div4_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <4>;
+	};
+
+	clk_24mhz: clk_24mhz {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	clkdiv32k_ck: clkdiv32k_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&clk_24mhz>;
+		clock-mult = <1>;
+		clock-div = <732>;
+	};
+
+	clkdiv32k_ick: clkdiv32k_ick {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a38>;
+	};
+
+	sysclk_div: sysclk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	pruss_ocp_gclk: pruss_ocp_gclk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_disp_m2_ck>;
+		reg = <0x4248>;
+	};
+
+	clk_32k_tpm_ck: clk_32k_tpm_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	timer1_fck: timer1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clkin_ck>, <&clkdiv32k_ick>, <&tclkin_ck>, <&clk_rc32k_ck>, <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4200>;
+	};
+
+	timer2_fck: timer2_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4204>;
+	};
+
+	timer3_fck: timer3_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4208>;
+	};
+
+	timer4_fck: timer4_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x420c>;
+	};
+
+	timer5_fck: timer5_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4210>;
+	};
+
+	timer6_fck: timer6_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4214>;
+	};
+
+	timer7_fck: timer7_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>;
+		reg = <0x4218>;
+	};
+
+	wdt1_fck: wdt1_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clkdiv32k_ick>;
+		reg = <0x422c>;
+	};
+
+	l3_gclk: l3_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	dpll_core_m4_div2_ck: dpll_core_m4_div2_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	l4hs_gclk: l4hs_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l3s_gclk: l3s_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	l4ls_gclk: l4ls_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m4_div2_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_core_m5_ck>, <&dpll_disp_m2_ck>;
+		reg = <0x4238>;
+	};
+
+	clk_32k_mosc_ck: clk_32k_mosc_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+	};
+
+	gpio0_dbclk_mux_ck: gpio0_dbclk_mux_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_rc32k_ck>, <&clk_32768_ck>, <&clkdiv32k_ick>, <&clk_32k_mosc_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4240>;
+	};
+
+	gpio0_dbclk: gpio0_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&gpio0_dbclk_mux_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2b68>;
+	};
+
+	gpio1_dbclk: gpio1_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c78>;
+	};
+
+	gpio2_dbclk: gpio2_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c80>;
+	};
+
+	gpio3_dbclk: gpio3_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c88>;
+	};
+
+	gpio4_dbclk: gpio4_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c90>;
+	};
+
+	gpio5_dbclk: gpio5_dbclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&clkdiv32k_ick>;
+		ti,bit-shift = <8>;
+		reg = <0x8c98>;
+	};
+
+	mmc_clk: mmc_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	gfx_fclk_clksel_ck: gfx_fclk_clksel_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sysclk_div>, <&dpll_per_m2_ck>;
+		ti,bit-shift = <1>;
+		reg = <0x423c>;
+	};
+
+	gfx_fck_div_ck: gfx_fck_div_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&gfx_fclk_clksel_ck>;
+		reg = <0x423c>;
+		ti,max-div = <2>;
+	};
+
+	disp_clk: disp_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&dpll_disp_m2_ck>, <&dpll_core_m5_ck>, <&dpll_per_m2_ck>;
+		reg = <0x4244>;
+		ti,set-rate-parent;
+	};
+
+	dpll_extdev_ck: dpll_extdev_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-clock";
+		clocks = <&sys_clkin_ck>, <&sys_clkin_ck>;
+		reg = <0x2e60>, <0x2e64>, <0x2e6c>;
+	};
+
+	dpll_extdev_m2_ck: dpll_extdev_m2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_extdev_ck>;
+		ti,max-div = <127>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e70>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	mux_synctimer32k_ck: mux_synctimer32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>, <&clkdiv32k_ick>;
+		reg = <0x4230>;
+	};
+
+	synctimer_32kclk: synctimer_32kclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&mux_synctimer32k_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x2a30>;
+	};
+
+	timer8_fck: timer8_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x421c>;
+	};
+
+	timer9_fck: timer9_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4220>;
+	};
+
+	timer10_fck: timer10_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4224>;
+	};
+
+	timer11_fck: timer11_fck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&tclkin_ck>, <&sys_clkin_ck>, <&clkdiv32k_ick>, <&clk_32k_tpm_ck>;
+		reg = <0x4228>;
+	};
+
+	cpsw_50m_clkdiv: cpsw_50m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_core_m5_ck>;
+		clock-mult = <1>;
+		clock-div = <1>;
+	};
+
+	cpsw_5m_clkdiv: cpsw_5m_clkdiv {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&cpsw_50m_clkdiv>;
+		clock-mult = <1>;
+		clock-div = <10>;
+	};
+
+	dpll_ddr_x2_ck: dpll_ddr_x2_ck {
+		#clock-cells = <0>;
+		compatible = "ti,am3-dpll-x2-clock";
+		clocks = <&dpll_ddr_ck>;
+	};
+
+	dpll_ddr_m4_ck: dpll_ddr_m4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&dpll_ddr_x2_ck>;
+		ti,max-div = <31>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2db8>;
+		ti,index-starts-at-one;
+		ti,invert-autoidle-bit;
+	};
+
+	dpll_per_clkdcoldo: dpll_per_clkdcoldo {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&dpll_per_ck>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+		ti,autoidle-shift = <8>;
+		reg = <0x2e14>;
+		ti,invert-autoidle-bit;
+	};
+
+	dll_aging_clk_div: dll_aging_clk_div {
+		#clock-cells = <0>;
+		compatible = "ti,divider-clock";
+		clocks = <&sys_clkin_ck>;
+		reg = <0x4250>;
+		ti,dividers = <8>, <16>, <32>;
+	};
+
+	div_core_25m_ck: div_core_25m_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sysclk_div>;
+		clock-mult = <1>;
+		clock-div = <8>;
+	};
+
+	func_12m_clk: func_12m_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&dpll_per_m2_ck>;
+		clock-mult = <1>;
+		clock-div = <16>;
+	};
+
+	vtp_clk_div: vtp_clk_div {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin_ck>;
+		clock-mult = <1>;
+		clock-div = <2>;
+	};
+
+	usbphy_32khz_clkmux: usbphy_32khz_clkmux {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&clk_32768_ck>, <&clk_32k_tpm_ck>;
+		reg = <0x4260>;
+	};
+
+	usb_phy0_always_on_clk32k: usb_phy0_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a40>;
+	};
+
+	usb_phy1_always_on_clk32k: usb_phy1_always_on_clk32k {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&usbphy_32khz_clkmux>;
+		ti,bit-shift = <8>;
+		reg = <0x2a48>;
+	};
+
+	usb_otg_ss0_refclk960m: usb_otg_ss0_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a60>;
+	};
+
+	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_per_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x8a68>;
+	};
+};
diff --git a/configs/am437x_gp_evm_defconfig b/configs/am437x_gp_evm_defconfig
new file mode 100644
index 0000000..53fb0bf
--- /dev/null
+++ b/configs/am437x_gp_evm_defconfig
@@ -0,0 +1,17 @@ 
+CONFIG_ARM=y
+CONFIG_TARGET_AM43XX_EVM=y
+CONFIG_DEFAULT_DEVICE_TREE="am437x-gp-evm"
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=1"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_DISABLE_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_MMC=y
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
new file mode 100644
index 0000000..7203687
--- /dev/null
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -0,0 +1,33 @@ 
+/*
+ * This header provides constants specific to AM43XX pinctrl bindings.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_AM43XX_H
+#define _DT_BINDINGS_PINCTRL_AM43XX_H
+
+#define MUX_MODE0	0
+#define MUX_MODE1	1
+#define MUX_MODE2	2
+#define MUX_MODE3	3
+#define MUX_MODE4	4
+#define MUX_MODE5	5
+#define MUX_MODE6	6
+#define MUX_MODE7	7
+#define MUX_MODE8	8
+
+#define PULL_DISABLE		(1 << 16)
+#define PULL_UP			(1 << 17)
+#define INPUT_EN		(1 << 18)
+#define SLEWCTRL_SLOW		(1 << 19)
+#define SLEWCTRL_FAST		0
+#define DS0_PULL_UP_DOWN_EN	(1 << 27)
+#define WAKEUP_ENABLE		(1 << 29)
+
+#define PIN_OUTPUT		(PULL_DISABLE)
+#define PIN_OUTPUT_PULLUP	(PULL_UP)
+#define PIN_OUTPUT_PULLDOWN	0
+#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
+#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
+#define PIN_INPUT_PULLDOWN	(INPUT_EN)
+
+#endif
diff --git a/include/dt-bindings/pwm/pwm.h b/include/dt-bindings/pwm/pwm.h
new file mode 100644
index 0000000..96f49e8
--- /dev/null
+++ b/include/dt-bindings/pwm/pwm.h
@@ -0,0 +1,14 @@ 
+/*
+ * This header provides constants for most PWM bindings.
+ *
+ * Most PWM bindings can include a flags cell as part of the PWM specifier.
+ * In most cases, the format of the flags cell uses the standard values
+ * defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_PWM_PWM_H
+#define _DT_BINDINGS_PWM_PWM_H
+
+#define PWM_POLARITY_INVERTED			(1 << 0)
+
+#endif