[v2,5/6] arm64: dts: berlin4ct: add the pinctrl node
diff mbox

Message ID 1442829860-4647-6-git-send-email-jszhang@marvell.com
State New
Headers show

Commit Message

Jisheng Zhang Sept. 21, 2015, 10:04 a.m. UTC
Add the avio, soc, sm pinctrl nodes for Marvell berlin4ct SoC.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
 arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Antoine Tenart Oct. 2, 2015, 1:24 p.m. UTC | #1
Jisheng,

On Mon, Sep 21, 2015 at 06:04:19PM +0800, Jisheng Zhang wrote:
> Add the avio, soc, sm pinctrl nodes for Marvell berlin4ct SoC.
> 
> Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
> ---
>  arch/arm64/boot/dts/marvell/berlin4ct.dtsi | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> index a3b5f1d..c374f1d 100644
> --- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> +++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
> @@ -225,6 +225,16 @@
>  			};
>  		};
>  
> +		soc_pinctrl: pinctrl@ea8000 {

We tend to use "pin-controller@" instead of "pinctrl@" in Berlin device
trees.

> +			compatible = "marvell,berlin4ct-soc-pinctrl";
> +			reg = <0xea8000 0x14>;
> +		};
> +
> +		avio_pinctrl: pinctrl@ea8400 {

Ditto.

> +			compatible = "marvell,berlin4ct-avio-pinctrl";
> +			reg = <0xea8400 0x8>;
> +		};
> +
>  		apb@fc0000 {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;
> @@ -280,5 +290,10 @@
>  				status = "disabled";
>  			};
>  		};
> +
> +		sm_pinctrl: pinctrl@fe2200 {

Ditto.

> +			compatible = "marvell,berlin4ct-sm-pinctrl";
> +			reg = <0xfe2200 0xc>;
> +		};
>  	};
>  };

Antoine

Patch
diff mbox

diff --git a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
index a3b5f1d..c374f1d 100644
--- a/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
+++ b/arch/arm64/boot/dts/marvell/berlin4ct.dtsi
@@ -225,6 +225,16 @@ 
 			};
 		};
 
+		soc_pinctrl: pinctrl@ea8000 {
+			compatible = "marvell,berlin4ct-soc-pinctrl";
+			reg = <0xea8000 0x14>;
+		};
+
+		avio_pinctrl: pinctrl@ea8400 {
+			compatible = "marvell,berlin4ct-avio-pinctrl";
+			reg = <0xea8400 0x8>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
@@ -280,5 +290,10 @@ 
 				status = "disabled";
 			};
 		};
+
+		sm_pinctrl: pinctrl@fe2200 {
+			compatible = "marvell,berlin4ct-sm-pinctrl";
+			reg = <0xfe2200 0xc>;
+		};
 	};
 };