@@ -26,10 +26,6 @@ Optional properties:
- vbus-supply: reference to the VBUS regulator
- maximum-speed: limit the maximum connection speed to "full-speed".
- tpl-support: TPL (Targeted Peripheral List) feature for targeted hosts
-- fsl,usbmisc: (FSL only) phandler of non-core register device, with one
- argument that indicate usb controller index
-- disable-over-current: (FSL only) disable over current detect
-- external-vbus-divider: (FSL only) enables off-chip resistor divider for Vbus
- itc-setting: interrupt threshold control register control, the setting
should be aligned with ITC bits at register USBCMD.
- ahb-burst-config: it is vendor dependent, the required value should be
@@ -53,6 +49,12 @@ Optional properties:
- phy-clkgate-delay-us: the delay time (us) between putting the PHY into
low power mode and gating the PHY clock.
+i.mx specific properties
+- fsl,usbmisc: phandler of non-core register device, with one
+ argument that indicate usb controller index
+- disable-over-current: disable over current detect
+- external-vbus-divider: enables off-chip resistor divider for Vbus
+
Example:
usb@f7ed0000 {
Each vendor may have its specific properties, they are not belonged to common optional properties, split them from common's. Signed-off-by: Peter Chen <peter.chen@freescale.com> --- Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)