diff mbox

[U-Boot,1/3] mx6ul_14x14_evk: Remove dead code

Message ID 1442239592-10439-1-git-send-email-fabio.estevam@freescale.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Fabio Estevam Sept. 14, 2015, 2:06 p.m. UTC 
iox74lv_set() is not used anywhere, so let's remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c | 43 -----------------------
 1 file changed, 43 deletions(-)

Comments

Stefano Babic Sept. 20, 2015, 7:50 a.m. UTC | #1 
On 14/09/2015 16:06, Fabio Estevam wrote:
> iox74lv_set() is not used anywhere, so let's remove it.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks !

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
index 612fb78..acb8431 100644
--- a/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
+++ b/board/freescale/mx6ul_14x14_evk/mx6ul_14x14_evk.c
@@ -155,49 +155,6 @@  static void iox74lv_init(void)
 	gpio_direction_output(IOX_OE, 1);
 };
 
-void iox74lv_set(int index)
-{
-	int i;
-
-	gpio_direction_output(IOX_OE, 0);
-
-	for (i = 7; i >= 0; i--) {
-		gpio_direction_output(IOX_SHCP, 0);
-
-		if (i == index)
-			gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]);
-		else
-			gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
-		udelay(500);
-		gpio_direction_output(IOX_SHCP, 1);
-		udelay(500);
-	}
-
-	gpio_direction_output(IOX_STCP, 0);
-	udelay(500);
-	/*
-	 * shift register will be output to pins
-	 */
-	gpio_direction_output(IOX_STCP, 1);
-
-	for (i = 7; i >= 0; i--) {
-		gpio_direction_output(IOX_SHCP, 0);
-		gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]);
-		udelay(500);
-		gpio_direction_output(IOX_SHCP, 1);
-		udelay(500);
-	}
-
-	gpio_direction_output(IOX_STCP, 0);
-	udelay(500);
-	/*
-	 * shift register will be output to pins
-	 */
-	gpio_direction_output(IOX_STCP, 1);
-
-	gpio_direction_output(IOX_OE, 1);
-};
-
 #ifdef CONFIG_SYS_I2C_MXC
 #define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
 /* I2C1 for PMIC and EEPROM */