@@ -709,10 +709,6 @@ config TARGET_PALMTREO680
select CPU_PXA
select SUPPORT_SPL
-config TARGET_XAENIAX
- bool "Support xaeniax"
- select CPU_PXA
-
config TARGET_COLIBRI_PXA270
bool "Support colibri_pxa270"
select CPU_PXA
@@ -880,7 +876,6 @@ source "board/wandboard/Kconfig"
source "board/warp/Kconfig"
source "board/woodburn/Kconfig"
source "board/work-microwave/work_92105/Kconfig"
-source "board/xaeniax/Kconfig"
source "arch/arm/Kconfig.debug"
deleted file mode 100644
@@ -1,9 +0,0 @@
-if TARGET_XAENIAX
-
-config SYS_BOARD
- default "xaeniax"
-
-config SYS_CONFIG_NAME
- default "xaeniax"
-
-endif
deleted file mode 100644
@@ -1,6 +0,0 @@
-XAENIAX BOARD
-#M: -
-S: Maintained
-F: board/xaeniax/
-F: include/configs/xaeniax.h
-F: configs/xaeniax_defconfig
deleted file mode 100644
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := xaeniax.o flash.o
deleted file mode 100644
@@ -1,412 +0,0 @@
-/*
- * (C) Copyright 2001
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <linux/byteorder/swab.h>
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* Board support for 1 or 2 flash devices */
-#define FLASH_PORT_WIDTH32
-#undef FLASH_PORT_WIDTH16
-
-#ifdef FLASH_PORT_WIDTH16
-#define FLASH_PORT_WIDTH ushort
-#define FLASH_PORT_WIDTHV vu_short
-#define SWAP(x) __swab16(x)
-#else
-#define FLASH_PORT_WIDTH ulong
-#define FLASH_PORT_WIDTHV vu_long
-#define SWAP(x) __swab32(x)
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define mb() __asm__ __volatile__ ("" : : : "memory")
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info);
-static int write_data (flash_info_t *info, ulong dest, FPW data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-void inline spin_wheel (void);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- int i;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- switch (i) {
- case 0:
- flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_1, &flash_info[i]);
- break;
- case 1:
- flash_get_size ((FPW *) PHYS_FLASH_2, &flash_info[i]);
- flash_get_offsets (PHYS_FLASH_2, &flash_info[i]);
- break;
- default:
- panic ("configured too many flash banks!\n");
- break;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors
- */
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0] );
-
- flash_protect ( FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0] );
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) {
- for (i = 0; i < info->sector_count; i++) {
- info->start[i] = base + (i * PHYS_FLASH_SECT_SIZE);
- info->protect[i] = 0;
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_INTEL:
- printf ("INTEL ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_28F128J3A:
- printf ("28F128J3A\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (FPW *addr, flash_info_t *info)
-{
- volatile FPW value;
-
- /* Write auto select command: read Manufacturer ID */
- addr[0x5555] = (FPW) 0x00AA00AA;
- addr[0x2AAA] = (FPW) 0x00550055;
- addr[0x5555] = (FPW) 0x00900090;
-
- mb ();
- value = addr[0];
-
- switch (value) {
-
- case (FPW) INTEL_MANUFACT:
- info->flash_id = FLASH_MAN_INTEL;
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
- return (0); /* no or unknown flash */
- }
-
- mb ();
- value = addr[1]; /* device ID */
-
- switch (value) {
-
- case (FPW) INTEL_ID_28F128J3A:
- info->flash_id += FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x02000000;
- break; /* => 16 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- break;
- }
-
- if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
- printf ("** ERROR: sector count %d > max (%d) **\n",
- info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
- info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- }
-
- addr[0] = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- int prot, sect;
- ulong type, start;
- int rcode = 0;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- type = (info->flash_id & FLASH_VENDMASK);
- if ((type != FLASH_MAN_INTEL)) {
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- /* Disable interrupts which might cause a timeout here */
- disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- FPWV *addr = (FPWV *) (info->start[sect]);
- FPW status;
-
- printf ("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- *addr = (FPW) 0x00500050; /* clear status register */
- *addr = (FPW) 0x00200020; /* erase setup */
- *addr = (FPW) 0x00D000D0; /* erase confirm */
-
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- *addr = (FPW) 0x00B000B0; /* suspend erase */
- *addr = (FPW) 0x00FF00FF; /* reset to read mode */
- rcode = 1;
- break;
- }
- }
-
- *addr = 0x00500050; /* clear status register cmd. */
- *addr = 0x00FF00FF; /* resest to read mode */
-
- printf (" done\n");
- }
- }
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- FPW data;
- int count, i, l, rc, port_width;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- return 4;
- }
-/* get lower word aligned address */
-#ifdef FLASH_PORT_WIDTH16
- wp = (addr & ~1);
- port_width = 2;
-#else
- wp = (addr & ~3);
- port_width = 4;
-#endif
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < port_width && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- }
-
- /*
- * handle word aligned part
- */
- count = 0;
- while (cnt >= port_width) {
- data = 0;
- for (i = 0; i < port_width; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_data (info, wp, SWAP (data))) != 0) {
- return (rc);
- }
- wp += port_width;
- cnt -= port_width;
- if (count++ > 0x800) {
- spin_wheel ();
- count = 0;
- }
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < port_width && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < port_width; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_data (info, wp, SWAP (data)));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word or halfword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_data (flash_info_t *info, ulong dest, FPW data)
-{
- FPWV *addr = (FPWV *) dest;
- ulong status;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) {
- printf ("not erased at %08lx (%lx)\n", (ulong) addr, *addr);
- return (2);
- }
- /* Disable interrupts which might cause a timeout here */
- disable_interrupts();
-
- *addr = (FPW) 0x00400040; /* write setup */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
- return (1);
- }
- }
-
- *addr = (FPW) 0x00FF00FF; /* restore read mode */
-
- return (0);
-}
-
-void inline spin_wheel (void)
-{
- static int p = 0;
- static char w[] = "\\/-";
-
- printf ("\010%c", w[p]);
- (++p == 3) ? (p = 0) : 0;
-}
deleted file mode 100644
@@ -1,69 +0,0 @@
-/*
- * (C) Copyright 2004
- * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Miscelaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* We have RAM, disable cache */
- dcache_disable();
- icache_disable();
-
- /* arch number of xaeniax */
- gd->bd->bi_arch_number = 585;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa0000100;
-
- return 0;
-}
-
-int board_late_init(void)
-{
- setenv("stdout", "serial");
- setenv("stderr", "serial");
- return 0;
-}
-
-int dram_init(void)
-{
- pxa2xx_dram_init();
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
deleted file mode 100644
@@ -1,3 +0,0 @@
-CONFIG_ARM=y
-CONFIG_TARGET_XAENIAX=y
-# CONFIG_CMD_SETEXPR is not set
@@ -499,15 +499,8 @@ again:
}
/* we have a packet address, so tell the card to use it */
-#ifndef CONFIG_XAENIAX
SMC_outb (dev, packet_no, PN_REG);
-#else
- /* On Xaeniax board, we can't use SMC_outb here because that way
- * the Allocate MMU command will end up written to the command register
- * as well, which will lead to a problem.
- */
- SMC_outl (dev, packet_no << 16, 0);
-#endif
+
/* do not write new ptr value if Write data fifo not empty */
while ( saved_ptr & PTR_NOTEMPTY )
printf ("Write data fifo not empty!\n");
@@ -542,39 +535,19 @@ again:
*/
#ifdef USE_32_BIT
SMC_outsl (dev, SMC91111_DATA_REG, buf, length >> 2);
-#ifndef CONFIG_XAENIAX
if (length & 0x2)
SMC_outw (dev, *((word *) (buf + (length & 0xFFFFFFFC))),
SMC91111_DATA_REG);
#else
- /* On XANEIAX, we can only use 32-bit writes, so we need to handle
- * unaligned tail part specially. The standard code doesn't work.
- */
- if ((length & 3) == 3) {
- u16 * ptr = (u16*) &buf[length-3];
- SMC_outl(dev, (*ptr) | ((0x2000 | buf[length-1]) << 16),
- SMC91111_DATA_REG);
- } else if ((length & 2) == 2) {
- u16 * ptr = (u16*) &buf[length-2];
- SMC_outl(dev, *ptr, SMC91111_DATA_REG);
- } else if (length & 1) {
- SMC_outl(dev, (0x2000 | buf[length-1]), SMC91111_DATA_REG);
- } else {
- SMC_outl(dev, 0, SMC91111_DATA_REG);
- }
-#endif
-#else
SMC_outsw (dev, SMC91111_DATA_REG, buf, (length) >> 1);
#endif /* USE_32_BIT */
-#ifndef CONFIG_XAENIAX
/* Send the last byte, if there is one. */
if ((length & 1) == 0) {
SMC_outw (dev, 0, SMC91111_DATA_REG);
} else {
SMC_outw (dev, buf[length - 1] | 0x2000, SMC91111_DATA_REG);
}
-#endif
/* and let the chipset deal with it */
SMC_outw (dev, MC_ENQUEUE, MMU_CMD_REG);
@@ -588,9 +561,6 @@ again:
/* release packet */
/* no need to release, MMU does that now */
-#ifdef CONFIG_XAENIAX
- SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG);
-#endif
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
@@ -610,9 +580,6 @@ again:
/* release packet */
/* no need to release, MMU does that now */
-#ifdef CONFIG_XAENIAX
- SMC_outw (dev, MC_FREEPKT, MMU_CMD_REG);
-#endif
/* wait for MMU getting ready (low) */
while (SMC_inw (dev, MMU_CMD_REG) & MC_BUSY) {
@@ -625,15 +592,7 @@ again:
}
/* restore previously saved registers */
-#ifndef CONFIG_XAENIAX
SMC_outb( dev, saved_pnr, PN_REG );
-#else
- /* On Xaeniax board, we can't use SMC_outb here because that way
- * the Allocate MMU command will end up written to the command register
- * as well, which will lead to a problem.
- */
- SMC_outl(dev, saved_pnr << 16, 0);
-#endif
SMC_outw( dev, saved_ptr, PTR_REG );
return length;
@@ -802,15 +761,7 @@ static int smc_rcv(struct eth_device *dev)
udelay(1); /* Wait until not busy */
/* restore saved registers */
-#ifndef CONFIG_XAENIAX
SMC_outb( dev, saved_pnr, PN_REG );
-#else
- /* On Xaeniax board, we can't use SMC_outb here because that way
- * the Allocate MMU command will end up written to the command register
- * as well, which will lead to a problem.
- */
- SMC_outl( dev, saved_pnr << 16, 0);
-#endif
SMC_outw( dev, saved_ptr, PTR_REG );
if (!is_error) {
@@ -77,19 +77,6 @@ struct smc91111_priv{
if (__p & 2) __v >>= 8; \
else __v &= 0xff; \
__v; })
-#elif defined(CONFIG_XAENIAX)
-#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r))))
-#define SMC_inw(a,z) ({ \
- unsigned int __p = (unsigned int)((a)->iobase + (z)); \
- unsigned int __v = *(volatile unsigned int *)((__p) & ~3); \
- if (__p & 3) __v >>= 16; \
- else __v &= 0xffff; \
- __v; })
-#define SMC_inb(a,p) ({ \
- unsigned int ___v = SMC_inw((a),(p) & ~1); \
- if ((p) & 1) ___v >>= 8; \
- else ___v &= 0xff; \
- ___v; })
#else
#define SMC_inl(a,r) (*((volatile dword *)((a)->iobase+(r))))
#define SMC_inw(a,r) (*((volatile word *)((a)->iobase+(r))))
@@ -104,15 +91,6 @@ struct smc91111_priv{
#ifdef CONFIG_XSENGINE
#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r<<1))) = d)
#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r<<1))) = d)
-#elif defined (CONFIG_XAENIAX)
-#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
-#define SMC_outw(a,d,p) ({ \
- dword __dwo = SMC_inl((a),(p) & ~3); \
- dword __dwn = (word)(d); \
- __dwo &= ((p) & 3) ? 0x0000ffff : 0xffff0000; \
- __dwo |= ((p) & 3) ? __dwn << 16 : __dwn; \
- SMC_outl((a), __dwo, (p) & ~3); \
-})
#else
#define SMC_outl(a,d,r) (*((volatile dword *)((a)->iobase+(r))) = d)
#define SMC_outw(a,d,r) (*((volatile word *)((a)->iobase+(r))) = d)
deleted file mode 100644
@@ -1,539 +0,0 @@
-/*
- * (C) Copyright 2004-2005
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2004
- * Vincent Dubey, Xa SA, vincent.dubey@xa-ch.com
- *
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.ne
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * Configuation settings for the xaeniax board.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_CPU_PXA25X 1 /* This is an PXA255 CPU */
-#define CONFIG_XAENIAX 1 /* on a xaeniax board */
-#define CONFIG_SYS_TEXT_BASE 0x0
-
-#define CONFIG_BOARD_LATE_INIT
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_BTUART 1 /* we use BTUART on XAENIAX */
-#define CONFIG_CONS_INDEX 4
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_DTT
-
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.68.201
-#define CONFIG_SERVERIP 192.168.68.62
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTCOMMAND "bootm 0x00100000"
-#define CONFIG_BOOTARGS "console=ttyS1,115200"
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Size of malloc() pool; this lives below the uppermost 128 KiB which are
- * used for the RAM copy of the uboot code
- */
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#undef CONFIG_SYS_PROMPT
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "u-boot$ " /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT "u-boot=> " /* Monitor Command Prompt */
-#endif
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-#define CONFIG_SYS_DEVICE_NULLDEV 1
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa1000000 /* default load address */
-
-#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 400/200/100 MHz */
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 banks (partition) of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
-#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
-#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
-#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
-#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
-#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000
-#define CONFIG_SYS_DRAM_SIZE 0x04000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (25*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-/* FIXME */
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x40000)/* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x40000 /* Total Size of Environment Sector */
-
-/*
- * SMSC91C111 Network Card
- */
-#define CONFIG_SMC91111 1
-#define CONFIG_SMC91111_BASE 0x10000300 /* chip select 3 */
-#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
-#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
-#undef CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-/*
- * GPIO settings
- */
-
-/*
- * GP05 == nUSBReset is 1
- * GP10 == CFReset is 1
- * GP13 == nCFDataEnable is 1
- * GP14 == nCFAddrEnable is 1
- * GP15 == nCS1 is 1
- * GP21 == ComBrdReset is 1
- * GP24 == SFRM is 1
- * GP25 == TXD is 1
- * GP31 == SYNC is 1
- * GP33 == nCS5 is 1
- * GP39 == FFTXD is 1
- * GP41 == RTS is 1
- * GP43 == BTTXD is 1
- * GP45 == BTRTS is 1
- * GP47 == TXD is 1
- * GP48 == nPOE is 1
- * GP49 == nPWE is 1
- * GP50 == nPIOR is 1
- * GP51 == nPIOW is 1
- * GP52 == nPCE[1] is 1
- * GP53 == nPCE[2] is 1
- * GP54 == nPSKTSEL is 1
- * GP55 == nPREG is 1
- * GP78 == nCS2 is 1
- * GP79 == nCS3 is 1
- * GP80 == nCS4 is 1
- * GP82 == NSSPSFRM is 1
- * GP83 == NSSPTXD is 1
- */
-#define CONFIG_SYS_GPSR0_VAL 0x8320E420
-#define CONFIG_SYS_GPSR1_VAL 0x00FFAA82
-#define CONFIG_SYS_GPSR2_VAL 0x000DC000
-
-/*
- * GP03 == LANReset is 0
- * GP06 == USBWakeUp is 0
- * GP11 == USBControl is 0
- * GP12 == Buzzer is 0
- * GP16 == PWM0 is 0
- * GP17 == PWM1 is 0
- * GP23 == SCLK is 0
- * GP30 == SDATA_OUT is 0
- * GP81 == NSSPCLK is 0
- */
-#define CONFIG_SYS_GPCR0_VAL 0x40C31848
-#define CONFIG_SYS_GPCR1_VAL 0x00000000
-#define CONFIG_SYS_GPCR2_VAL 0x00020000
-
-/*
- * GP00 == CPUWakeUpUSB is input
- * GP01 == GP reset is input
- * GP02 == LANInterrupt is input
- * GP03 == LANReset is output
- * GP04 == USBInterrupt is input
- * GP05 == nUSBReset is output
- * GP06 == USBWakeUp is output
- * GP07 == CFReady/nBusy is input
- * GP08 == nCFCardDetect1 is input
- * GP09 == nCFCardDetect2 is input
- * GP10 == nCFReset is output
- * GP11 == USBControl is output
- * GP12 == Buzzer is output
- * GP13 == CFDataEnable is output
- * GP14 == CFAddressEnable is output
- * GP15 == nCS1 is output
- * GP16 == PWM0 is output
- * GP17 == PWM1 is output
- * GP18 == RDY is input
- * GP19 == ReaderReady is input
- * GP20 == ReaderReset is input
- * GP21 == ComBrdReset is output
- * GP23 == SCLK is output
- * GP24 == SFRM is output
- * GP25 == TXD is output
- * GP26 == RXD is input
- * GP27 == EXTCLK is input
- * GP28 == BITCLK is output
- * GP29 == SDATA_IN0 is input
- * GP30 == SDATA_OUT is output
- * GP31 == SYNC is output
- * GP32 == SYSSCLK is output
- * GP33 == nCS5 is output
- * GP34 == FFRXD is input
- * GP35 == CTS is input
- * GP36 == DCD is input
- * GP37 == DSR is input
- * GP38 == RI is input
- * GP39 == FFTXD is output
- * GP40 == DTR is output
- * GP41 == RTS is output
- * GP42 == BTRXD is input
- * GP43 == BTTXD is output
- * GP44 == BTCTS is input
- * GP45 == BTRTS is output
- * GP46 == RXD is input
- * GP47 == TXD is output
- * GP48 == nPOE is output
- * GP49 == nPWE is output
- * GP50 == nPIOR is output
- * GP51 == nPIOW is output
- * GP52 == nPCE[1] is output
- * GP53 == nPCE[2] is output
- * GP54 == nPSKTSEL is output
- * GP55 == nPREG is output
- * GP56 == nPWAIT is input
- * GP57 == nPIOS16 is input
- * GP58 == LDD[0] is output
- * GP59 == LDD[1] is output
- * GP60 == LDD[2] is output
- * GP61 == LDD[3] is output
- * GP62 == LDD[4] is output
- * GP63 == LDD[5] is output
- * GP64 == LDD[6] is output
- * GP65 == LDD[7] is output
- * GP66 == LDD[8] is output
- * GP67 == LDD[9] is output
- * GP68 == LDD[10] is output
- * GP69 == LDD[11] is output
- * GP70 == LDD[12] is output
- * GP71 == LDD[13] is output
- * GP72 == LDD[14] is output
- * GP73 == LDD[15] is output
- * GP74 == LCD_FCLK is output
- * GP75 == LCD_LCLK is output
- * GP76 == LCD_PCLK is output
- * GP77 == LCD_ACBIAS is output
- * GP78 == nCS2 is output
- * GP79 == nCS3 is output
- * GP80 == nCS4 is output
- * GP81 == NSSPCLK is output
- * GP82 == NSSPSFRM is output
- * GP83 == NSSPTXD is output
- * GP84 == NSSPRXD is input
- */
-#define CONFIG_SYS_GPDR0_VAL 0xD3E3FC68
-#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB83
-#define CONFIG_SYS_GPDR2_VAL 0x000FFFFF
-
-/*
- * GP01 == GP reset is AF01
- * GP15 == nCS1 is AF10
- * GP16 == PWM0 is AF10
- * GP17 == PWM1 is AF10
- * GP18 == RDY is AF01
- * GP23 == SCLK is AF10
- * GP24 == SFRM is AF10
- * GP25 == TXD is AF10
- * GP26 == RXD is AF01
- * GP27 == EXTCLK is AF01
- * GP28 == BITCLK is AF01
- * GP29 == SDATA_IN0 is AF10
- * GP30 == SDATA_OUT is AF01
- * GP31 == SYNC is AF01
- * GP32 == SYSCLK is AF01
- * GP33 == nCS5 is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS is AF01
- * GP36 == DCD is AF01
- * GP37 == DSR is AF01
- * GP38 == RI is AF01
- * GP39 == FFTXD is AF10
- * GP40 == DTR is AF10
- * GP41 == RTS is AF10
- * GP42 == BTRXD is AF01
- * GP43 == BTTXD is AF10
- * GP44 == BTCTS is AF01
- * GP45 == BTRTS is AF10
- * GP46 == RXD is AF10
- * GP47 == TXD is AF01
- * GP48 == nPOE is AF10
- * GP49 == nPWE is AF10
- * GP50 == nPIOR is AF10
- * GP51 == nPIOW is AF10
- * GP52 == nPCE[1] is AF10
- * GP53 == nPCE[2] is AF10
- * GP54 == nPSKTSEL is AF10
- * GP55 == nPREG is AF10
- * GP56 == nPWAIT is AF01
- * GP57 == nPIOS16 is AF01
- * GP58 == LDD[0] is AF10
- * GP59 == LDD[1] is AF10
- * GP60 == LDD[2] is AF10
- * GP61 == LDD[3] is AF10
- * GP62 == LDD[4] is AF10
- * GP63 == LDD[5] is AF10
- * GP64 == LDD[6] is AF10
- * GP65 == LDD[7] is AF10
- * GP66 == LDD[8] is AF10
- * GP67 == LDD[9] is AF10
- * GP68 == LDD[10] is AF10
- * GP69 == LDD[11] is AF10
- * GP70 == LDD[12] is AF10
- * GP71 == LDD[13] is AF10
- * GP72 == LDD[14] is AF10
- * GP73 == LDD[15] is AF10
- * GP74 == LCD_FCLK is AF10
- * GP75 == LCD_LCLK is AF10
- * GP76 == LCD_PCLK is AF10
- * GP77 == LCD_ACBIAS is AF10
- * GP78 == nCS2 is AF10
- * GP79 == nCS3 is AF10
- * GP80 == nCS4 is AF10
- * GP81 == NSSPCLK is AF01
- * GP82 == NSSPSFRM is AF01
- * GP83 == NSSPTXD is AF01
- * GP84 == NSSPRXD is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL 0x80000004
-#define CONFIG_SYS_GAFR0_U_VAL 0x595A801A
-#define CONFIG_SYS_GAFR1_L_VAL 0x699A9559
-#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000256
-
-/*
- * clock settings
- */
-/* RDH = 1
- * PH = 0
- * VFS = 0
- * BFS = 0
- * SSS = 0
- */
-#define CONFIG_SYS_PSSR_VAL 0x00000030
-
-#define CONFIG_SYS_CKEN 0x00000080 /* */
-#define CONFIG_SYS_ICMR 0x00000000 /* No interrupts enabled */
-#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
-
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1 :
- * [31] 0 -
- * [30:28] 000 -
- * [27:24] 0000 -
- * [23:20] 0000 -
- * [19] 0 -
- * [18:16] 000 -
- * configuration for nCS0:
- * [15] 0 - Slower Device
- * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0011 - Address to data valid in bursts: (3+1)*MemClk = 40 ns
- * [07:04] 1111 - " for first access: (23+2)*MemClk = 250 ns (fixme 12+2?)
- * [03] 0 - 32 Bit bus width
- * [02:00] 010 - burst OF 4 ROM or FLASH
-*/
-#define CONFIG_SYS_MSC0_VAL 0x000023D2
-
-/* This is the configuration for nCS2/3 -> USB controller, LAN
- * configuration for nCS3: LAN
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0010 - RDF3: Address for first access: (2+1)*MemClk = 30 ns
- * [19] 0 - 32 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS2: USB
- * [15] 1 - Faster Device
- * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL 0x1224A26C
-
-/* This is the configuration for nCS4/5 -> LAN
- * configuration for nCS5:
- * [31] 0 -
- * [30:28] 000 -
- * [27:24] 0000 -
- * [23:20] 0000 -
- * [19] 0 -
- * [18:16] 000 -
- * configuration for nCS4: LAN
- * [15] 1 - Faster Device
- * [14:12] 010 - RRR2: CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0010 - RDN2: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [07:04] 0110 - RDF2: Address for first access: (6+1)*MemClk = 70 ns
- * [03] 0 - 32 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL 0x00001224
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29] 000 - reserved
- * [28] 0 - no SA1111 compatiblity mode
- * [27] 0 - latch return data with return clock
- * [26] 0 - alternate addressing for pair 2/3
- * [25:24] 00 - timings
- * [23] 0 - internal banks in lower partition 2/3 (not used)
- * [22:21] 00 - row address bits for partition 2/3 (not used)
- * [20:19] 00 - column address bits for partition 2/3 (not used)
- * [18] 0 - SDRAM partition 2/3 width is 32 bit
- * [17] 0 - SDRAM partition 3 disabled
- * [16] 0 - SDRAM partition 2 disabled
- * [15:13] 000 - reserved
- * [12] 0 - no SA1111 compatiblity mode
- * [11] 1 - latch return data with return clock
- * [10] 0 - no alternate addressing for pair 0/1
- * [09:08] 10 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7] 1 - 4 internal banks in lower partition pair
- * [06:05] 10 - 13 row address bits for partition 0/1
- * [04:03] 01 - 9 column address bits for partition 0/1
- * [02] 0 - SDRAM partition 0/1 width is 32 bit
- * [01] 0 - disable SDRAM partition 1
- * [00] 1 - enable SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL 0x00000AC9
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0 - reserved
- * [25] 0 - K2FREE: not free running
- * [24] 0 - K1FREE: not free running
- * [23] 0 - K0FREE: not free running
- * [22] 0 - SLFRSH: self refresh disabled
- * [21] 0 - reserved
- * [20] 1 - APD: auto power down
- * [19] 0 - K2DB2: SDCLK2 is MemClk
- * [18] 0 - K2RUN: disable SDCLK2
- * [17] 0 - K1DB2: SDCLK1 is MemClk
- * [16] 1 - K1RUN: enable SDCLK1
- * [15] 1 - E1PIN: SDRAM clock enable
- * [14] 0 - K0DB2: SDCLK0 is MemClk
- * [13] 0 - K0RUN: disable SDCLK0
- * [12] 0 - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL 0x00138018 /* mh: was 0x00118018 */
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31] 0 - reserved
- * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20] 011 - MDCL2: SDRAM2/3 Cas Latency. (not used)
- * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used)
- * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used)
- * [15] 0 - reserved
- * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04] 011 - MDCL0: SDRAM0/1 Cas Latency.
- * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL 0x00320032
-
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00010504
-#define CONFIG_SYS_MCMEM1_VAL 0x00010504
-#define CONFIG_SYS_MCATT0_VAL 0x00010504
-#define CONFIG_SYS_MCATT1_VAL 0x00010504
-#define CONFIG_SYS_MCIO0_VAL 0x00004715
-#define CONFIG_SYS_MCIO1_VAL 0x00004715
-
-
-#endif /* __CONFIG_H */
This board has not been converted to generic board by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> --- arch/arm/Kconfig | 5 - board/xaeniax/Kconfig | 9 - board/xaeniax/MAINTAINERS | 6 - board/xaeniax/Makefile | 8 - board/xaeniax/flash.c | 412 ----------------------------------- board/xaeniax/xaeniax.c | 69 ------ configs/xaeniax_defconfig | 3 - drivers/net/smc91111.c | 51 +---- drivers/net/smc91111.h | 22 -- include/configs/xaeniax.h | 539 ---------------------------------------------- 10 files changed, 1 insertion(+), 1123 deletions(-) delete mode 100644 board/xaeniax/Kconfig delete mode 100644 board/xaeniax/MAINTAINERS delete mode 100644 board/xaeniax/Makefile delete mode 100644 board/xaeniax/flash.c delete mode 100644 board/xaeniax/xaeniax.c delete mode 100644 configs/xaeniax_defconfig delete mode 100644 include/configs/xaeniax.h