@@ -75,6 +75,9 @@
#define PIIX4_WORD_DATA 0x0C
#define PIIX4_BLOCK_DATA 0x14
+/* Multi-port constants */
+#define PIIX4_MAX_ADAPTERS 4
+
/* insmod parameters */
/* If force is set to anything different from 0, we forcibly enable the
@@ -561,7 +564,7 @@ static const struct pci_device_id piix4_ids[] = {
MODULE_DEVICE_TABLE (pci, piix4_ids);
-static struct i2c_adapter *piix4_main_adapter;
+static struct i2c_adapter *piix4_main_adapters[PIIX4_MAX_ADAPTERS];
static struct i2c_adapter *piix4_aux_adapter;
static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
@@ -629,7 +632,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
return retval;
/* Try to register main SMBus adapter, give up if we can't */
- retval = piix4_add_adapter(dev, retval, &piix4_main_adapter);
+ retval = piix4_add_adapter(dev, retval, &piix4_main_adapters[0]);
if (retval < 0)
return retval;
@@ -675,9 +678,14 @@ static void piix4_adap_remove(struct i2c_adapter *adap, int free_smba)
static void piix4_remove(struct pci_dev *dev)
{
- if (piix4_main_adapter) {
- piix4_adap_remove(piix4_main_adapter, 1);
- piix4_main_adapter = NULL;
+ int port;
+
+ for (port = 0; port < PIIX4_MAX_ADAPTERS; port++) {
+ if (piix4_main_adapters[port]) {
+ piix4_adap_remove(piix4_main_adapters[port],
+ port == 0);
+ piix4_main_adapters[port] = NULL;
+ }
}
if (piix4_aux_adapter) {
The SB800 chipset supports a multiplexed main SMBus controller with four ports. Therefore the static variable piix4_main_adapter is converted into a piix4_main_adapters array that can hold one i2c_adapter for each multiplexed port. The auxiliary adapter remains unchanged since it represents the second (not multiplexed) SMBus controller on the SB800 chipset. Signed-off-by: Christian Fetzer <fetzer.ch@gmail.com> --- drivers/i2c/busses/i2c-piix4.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)