@@ -16,6 +16,15 @@ config DM_REGULATOR
for this purpose if PMIC I/O driver is implemented or dm_scan_fdt_node()
otherwise. Detailed information can be found in the header file.
+config REGULATOR_ACT8846
+ bool "Enable driver for ACT8846 regulator"
+ depends on DM_REGULATOR && PMIC_ACT8846
+ ---help---
+ Enable support for the regulator functions of the ACT8846 PMIC. The
+ driver implements get/set api for the various BUCKS and LDOS supported
+ by the PMIC device. This driver is controlled by a device tree node
+ which includes voltage limits.
+
config DM_REGULATOR_PFUZE100
bool "Enable Driver Model for REGULATOR PFUZE100"
depends on DM_REGULATOR && DM_PMIC_PFUZE100
@@ -6,6 +6,7 @@
#
obj-$(CONFIG_DM_REGULATOR) += regulator-uclass.o
+obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
obj-$(CONFIG_DM_REGULATOR_PFUZE100) += pfuze100.o
obj-$(CONFIG_DM_REGULATOR_FIXED) += fixed.o
new file mode 100644
@@ -0,0 +1,155 @@
+/*
+ * Copyright (C) 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * Based on Rockchip's drivers/power/pmic/pmic_act8846.c:
+ * Copyright (C) 2012 rockchips
+ * zyw <zyw@rock-chips.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <power/act8846_pmic.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+
+static const u16 voltage_map[] = {
+ 600, 625, 650, 675, 700, 725, 750, 775,
+ 800, 825, 850, 875, 900, 925, 950, 975,
+ 1000, 1025, 1050, 1075, 1100, 1125, 1150, 1175,
+ 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550,
+ 1600, 1650, 1700, 1750, 1800, 1850, 1900, 1950,
+ 2000, 2050, 2100, 2150, 2200, 2250, 2300, 2350,
+ 2400, 2500, 2600, 2700, 2800, 2900, 3000, 3100,
+ 3200, 3300, 3400, 3500, 3600, 3700, 3800, 3900,
+};
+
+enum {
+ REG_SYS0,
+ REG_SYS1,
+ REG1_VOL = 0x10,
+ REG1_CTL = 0X11,
+ REG2_VOL0 = 0x20,
+ REG2_VOL1,
+ REG2_CTL,
+ REG3_VOL0 = 0x30,
+ REG3_VOL1,
+ REG3_CTL,
+ REG4_VOL0 = 0x40,
+ REG4_VOL1,
+ REG4_CTL,
+ REG5_VOL = 0x50,
+ REG5_CTL,
+ REG6_VOL = 0X58,
+ REG6_CTL,
+ REG7_VOL = 0x60,
+ REG7_CTL,
+ REG8_VOL = 0x68,
+ REG8_CTL,
+ REG9_VOL = 0x70,
+ REG9_CTL,
+ REG10_VOL = 0x80,
+ REG10_CTL,
+ REG11_VOL = 0x90,
+ REG11_CTL,
+ REG12_VOL = 0xa0,
+ REG12_CTL,
+ REG13 = 0xb1,
+};
+
+static const u8 addr_vol[] = {
+ 0, REG1_VOL, REG2_VOL0, REG3_VOL0, REG4_VOL0,
+ REG5_VOL, REG6_VOL, REG7_VOL, REG8_VOL, REG9_VOL,
+ REG10_VOL, REG11_VOL, REG12_VOL,
+};
+
+static const u8 addr_ctl[] = {
+ 0, REG1_CTL, REG2_CTL, REG3_CTL, REG4_CTL,
+ REG5_CTL, REG6_CTL, REG7_CTL, REG8_CTL, REG9_CTL,
+ REG10_CTL, REG11_CTL, REG12_CTL,
+};
+
+static int check_volt_table(const u16 *volt_table, int uvolt)
+{
+ int i;
+
+ for (i = VOL_MIN_IDX; i < VOL_MAX_IDX; i++) {
+ if (uvolt <= (volt_table[i] * 1000))
+ return i;
+ }
+ return -EINVAL;
+}
+
+static int reg_get_value(struct udevice *dev)
+{
+ int reg = dev->driver_data;
+ int ret;
+
+ ret = pmic_reg_read(dev->parent, reg);
+ if (ret < 0)
+ return ret;
+
+ return voltage_map[ret & LDO_VOL_MASK] * 1000;
+}
+
+static int reg_set_value(struct udevice *dev, int uvolt)
+{
+ int reg = dev->driver_data;
+ int val;
+
+ val = check_volt_table(voltage_map, uvolt);
+ if (val < 0)
+ return val;
+
+ return pmic_clrsetbits(dev->parent, addr_vol[reg], LDO_VOL_MASK, val);
+}
+
+static int reg_set_enable(struct udevice *dev, bool enable)
+{
+ int reg = dev->driver_data;
+
+ return pmic_clrsetbits(dev->parent, addr_ctl[reg], LDO_EN_MASK,
+ enable ? LDO_EN_MASK : 0);
+}
+
+static bool reg_get_enable(struct udevice *dev)
+{
+ int reg = dev->driver_data;
+ int ret;
+
+ ret = pmic_reg_read(dev->parent, reg);
+ if (ret < 0)
+ return ret;
+
+ return ret & LDO_EN_MASK ? true : false;
+}
+
+static int act8846_reg_probe(struct udevice *dev)
+{
+ struct dm_regulator_uclass_platdata *uc_pdata;
+ int reg = dev->driver_data;
+
+ uc_pdata = dev_get_uclass_platdata(dev);
+
+ uc_pdata->type = reg <= 4 ? REGULATOR_TYPE_BUCK : REGULATOR_TYPE_LDO;
+ uc_pdata->mode_count = 0;
+
+ return 0;
+}
+
+static const struct dm_regulator_ops act8846_reg_ops = {
+ .get_value = reg_get_value,
+ .set_value = reg_set_value,
+ .get_enable = reg_get_enable,
+ .set_enable = reg_set_enable,
+};
+
+U_BOOT_DRIVER(act8846_buck) = {
+ .name = "act8846_reg",
+ .id = UCLASS_REGULATOR,
+ .ops = &act8846_reg_ops,
+ .probe = act8846_reg_probe,
+};
Add a full regulator driver for the ACT8846. This provides easy access to voltage and current settings for each regulator. Signed-off-by: Simon Glass <sjg@chromium.org> --- Changes in v4: None Changes in v3: None Changes in v2: None drivers/power/regulator/Kconfig | 9 +++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/act8846.c | 155 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 165 insertions(+) create mode 100644 drivers/power/regulator/act8846.c