diff mbox

[v3,1/3] ARM: qcom: add SFPB nodes to IPQ806x dts

Message ID 1439855266-26242-2-git-send-email-mathieu@codeaurora.org
State Not Applicable
Headers show

Commit Message

Mathieu Olivari Aug. 17, 2015, 11:47 p.m. UTC
Add one new node to the ipq806x.dtsi file to declare & register the
hardware spinlock devices. This mechanism is required to be used by
other drivers such as SMEM.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
---
 arch/arm/boot/dts/qcom-ipq8064.dtsi | 11 +++++++++++
 1 file changed, 11 insertions(+)

Comments

Bjorn Andersson Aug. 18, 2015, 5:59 p.m. UTC | #1
On Mon 17 Aug 16:47 PDT 2015, Mathieu Olivari wrote:

> Add one new node to the ipq806x.dtsi file to declare & register the
> hardware spinlock devices. This mechanism is required to be used by
> other drivers such as SMEM.
> 

Reviewed-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

> Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
> ---
>  arch/arm/boot/dts/qcom-ipq8064.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> index 9f727d8..8d366ae 100644
> --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
> +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
> @@ -329,5 +329,16 @@
>  			#reset-cells = <1>;
>  		};
>  
> +		sfpb_mutex_block: syscon@1200600 {
> +			compatible = "syscon";
> +			reg = <0x01200600 0x100>;

I have this block listed to start at 0x1200000 and used 0x604 as offset
when testing this. In my docs there's nothing in those first 0x600 bytes
though, so this works fine for me.

> +		};
> +	};
> +
> +	sfpb_mutex: sfpb-mutex {
> +		compatible = "qcom,sfpb-mutex";
> +		syscon = <&sfpb_mutex_block 4 4>;
> +
> +		#hwlock-cells = <1>;
>  	};
>  };

Regards,
Bjorn
diff mbox

Patch

diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 9f727d8..8d366ae 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -329,5 +329,16 @@ 
 			#reset-cells = <1>;
 		};
 
+		sfpb_mutex_block: syscon@1200600 {
+			compatible = "syscon";
+			reg = <0x01200600 0x100>;
+		};
+	};
+
+	sfpb_mutex: sfpb-mutex {
+		compatible = "qcom,sfpb-mutex";
+		syscon = <&sfpb_mutex_block 4 4>;
+
+		#hwlock-cells = <1>;
 	};
 };