@@ -294,6 +294,7 @@ config MACH_MAGICIAN
bool "Enable HTC Magician Support"
select IWMMXT
select PXA27x
+ select HTC_EGPIO
config MACH_MIOA701
bool "Mitac Mio A701 Support"
@@ -32,6 +32,8 @@
#define GPIO37_MAGICIAN_KEY_HANGUP 37
#define GPIO38_MAGICIAN_KEY_CONTACTS 38
#define GPIO40_MAGICIAN_GSM_OUT2 40
+#define GPIO46_MAGICIAN_IR_RX 46
+#define GPIO47_MAGICIAN_IR_TX 47
#define GPIO48_MAGICIAN_UNKNOWN 48
#define GPIO56_MAGICIAN_UNKNOWN 56
#define GPIO57_MAGICIAN_CAM_RESET 57
@@ -52,14 +54,16 @@
#define GPIO101_MAGICIAN_KEY_VOL_DOWN 101
#define GPIO102_MAGICIAN_KEY_PHONE 102
#define GPIO103_MAGICIAN_LED_KP 103
-#define GPIO104_MAGICIAN_LCD_POWER_1 104
-#define GPIO105_MAGICIAN_LCD_POWER_2 105
-#define GPIO106_MAGICIAN_LCD_POWER_3 106
+#define GPIO104_MAGICIAN_LCD_VOFF_EN 104
+#define GPIO105_MAGICIAN_LCD_VON_EN 105
+#define GPIO106_MAGICIAN_LCD_DCDC_NRESET 106
#define GPIO107_MAGICIAN_DS1WM_IRQ 107
#define GPIO108_MAGICIAN_GSM_READY 108
#define GPIO114_MAGICIAN_UNKNOWN 114
#define GPIO115_MAGICIAN_nPEN_IRQ 115
#define GPIO116_MAGICIAN_nCAM_EN 116
+#define GPIO117_MAGICIAN_I2C_SCL 117
+#define GPIO118_MAGICIAN_I2C_SDA 118
#define GPIO119_MAGICIAN_UNKNOWN 119
#define GPIO120_MAGICIAN_UNKNOWN 120
@@ -98,16 +102,19 @@
#define EGPIO_MAGICIAN_BL_POWER MAGICIAN_EGPIO(1, 7)
#define EGPIO_MAGICIAN_SD_POWER MAGICIAN_EGPIO(2, 0)
#define EGPIO_MAGICIAN_CARKIT_MIC MAGICIAN_EGPIO(2, 1)
-#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_IR_RECEIVE_SHUTDOWN MAGICIAN_EGPIO(2, 2)
#define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3)
#define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4)
#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_NICD_CHARGE MAGICIAN_EGPIO(2, 6)
#define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7)
/* input */
-#define EGPIO_MAGICIAN_CABLE_STATE_AC MAGICIAN_EGPIO(4, 0)
-#define EGPIO_MAGICIAN_CABLE_STATE_USB MAGICIAN_EGPIO(4, 1)
+/* AC=1, USB=0 */
+#define EGPIO_MAGICIAN_CABLE_TYPE MAGICIAN_EGPIO(4, 0)
+/* =1 when AC or USB cable inserted */
+#define EGPIO_MAGICIAN_CABLE_INSERT1 MAGICIAN_EGPIO(4, 1)
#define EGPIO_MAGICIAN_BOARD_ID0 MAGICIAN_EGPIO(5, 0)
#define EGPIO_MAGICIAN_BOARD_ID1 MAGICIAN_EGPIO(5, 1)
@@ -116,5 +123,7 @@
#define EGPIO_MAGICIAN_nSD_READONLY MAGICIAN_EGPIO(5, 4)
#define EGPIO_MAGICIAN_EP_INSERT MAGICIAN_EGPIO(6, 1)
+/* FIXME same like 4,1, may differ for host/device */
+#define EGPIO_MAGICIAN_CABLE_INSERT2 MAGICIAN_EGPIO(6, 4)
#endif /* _MAGICIAN_H_ */
@@ -4,13 +4,54 @@
* and T-Mobile MDA Compact.
*
* Copyright (c) 2006-2007 Philipp Zabel
+ * Copyright (c) 2014-2015 Petr Cvek (massive rework)
*
- * Based on hx4700.c, spitz.c and others.
+ * Based on hx4700.c, spitz.c, board-overo.c and others.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
+ *
+ * NOTICE MDA Compact (T-mobile XDA) facts:
+ * On "LCD type = 1, system_rev = 2" (0x3a in CPLD)
+ * Samsung LTP280QV - valid LCD init sequence sequence:
+ * powerup: Vdigital->Vanalog->gate Voff->gate Von->data enable
+ * powerdown: data disable->gate Von->gate Voff->Vanalog->Vdigital
+ * Measured on PCB:
+ * GPIO106
+ * Affects VOFF, VON and other voltages
+ * Probably main reset pin for DC-DC converter
+ * GPIO75
+ * Must be AF0+OUT (WM leaves it to AF2+OUT), not LCD signal
+ * GPIO106 works only when GPIO75 is high (DC-DC power enable?)
+ * After LCD powerup, value is irrelevant
+ * GPIO104
+ * LCD VOFF (gate off voltage)
+ * GPIO105
+ * LCD VON (gate on voltage)
+ * FFUART (/dev/ttyS0) WM: 38400,8,n,1,crtscts (GSM data?)
+ * BTUART (/dev/ttyS1) WM: 115200,8,n,1,crtscts (GSM AT commands)
+ * Use a HTC line discipline: 0x02 channel(==0x16) data 0x02
+ * EGPIO(CPLD) should be always present (controls "all" supply power)
+ * For rootfs on MMC/SD: EGPIO module controls card power (in kernel)
+ * cpu-freq often freeze platform (errata?, use userspace gov)
+ * Do not use YUV420, (erratum E24) causes LCD hang (forever)
+ * Many GSM related pins are unknown
+ * gpio-rc-recv probably require lowpass filter (sw is OK)
+ * TODO EGPIO_MAGICIAN_IR_RECEIVE_SHUTDOWN
+ * FIXME AC charging blocks IrDA
+ * Unimplemented blocking of camera+power+reset, reset and door open reset
+ * Registers: htc-pasic3.h (but blocks charging too)
+ * Other PXA machines have wait_for_sync for ADS7846 (during LCD refresh)
+ * pda-power has not optimal charging (accu can be bloated)
+ * TODO Current switching works? Is gpio-regulator/bq24022 required?
+ * pdata supports alternative drivers (mutually exclusive modules)
+ * i2c-pxa vs i2c-gpio (SCCB)
+ * pwm_bl vs gpio_backlight
+ * pxa27x_udc vs phy-gpio-vbus-usb
+ * physmap-flash vs pxa2xx-flash
+ *
*/
#include <linux/kernel.h>
@@ -28,8 +69,14 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+#include <linux/regulator/max1586.h>
+
#include <linux/usb/gpio_vbus.h>
#include <linux/i2c/pxa-i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c.h>
+
#include <mach/hardware.h>
#include <asm/mach-types.h>
@@ -42,46 +89,74 @@
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
+#include <linux/platform_data/camera-pxa.h>
+
+#include <linux/platform_data/gpio_backlight.h>
+
+#include <linux/platform_data/pxa2xx_udc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <linux/usb/g_hid.h>
+
+#include <media/soc_camera.h>
+#include <sound/uda1380.h>
#include "devices.h"
#include "generic.h"
+#include <linux/spi/ads7846.h>
+#include <linux/spi/pxa2xx_spi.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c/pxa-i2c.h>
+#include <media/gpio-ir-recv.h>
+
static unsigned long magician_pin_config[] __initdata = {
/* SDRAM and Static Memory I/O Signals */
GPIO20_nSDCS_2,
GPIO21_nSDCS_3,
GPIO15_nCS_1,
- GPIO78_nCS_2, /* PASIC3 */
- GPIO79_nCS_3, /* EGPIO CPLD */
+ GPIO78_nCS_2, /* PASIC3 */
+ GPIO79_nCS_3, /* EGPIO CPLD */
GPIO80_nCS_4,
GPIO33_nCS_5,
+ GPIO49_nPWE,
+ GPIO18_RDY,
- /* I2C */
+ /* I2C UDA1380 + OV9640 */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
- /* PWM 0 */
+ /* Omnivision camera power and reset GPIO*/
+ MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), /* nEnable, active in low*/
+ MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH), /* Reset, active in high*/
+
+#if IS_ENABLED(CONFIG_PWM_PXA)
+ /* PWM 0 - LCD backlight */
GPIO16_PWM0_OUT,
+#else
+ /* Ensure static backlight without any driver */
+ MFP_CFG_OUT(GPIO16, AF0, DRIVE_HIGH), /* Backlight enabled */
+#endif
- /* I2S */
+ /* I2S UDA1380 capture */
GPIO28_I2S_BITCLK_OUT,
GPIO29_I2S_SDATA_IN,
GPIO31_I2S_SYNC,
GPIO113_I2S_SYSCLK,
- /* SSP 1 */
+ /* SSP 1 UDA1380 playback */
GPIO23_SSP1_SCLK,
GPIO24_SSP1_SFRM,
GPIO25_SSP1_TXD,
- /* SSP 2 */
+ /* SSP 2 TSC2046 touchscreen */
GPIO19_SSP2_SCLK,
GPIO14_SSP2_SFRM,
GPIO89_SSP2_TXD,
GPIO88_SSP2_RXD,
- /* MMC */
+ /* MMC/SD/SDHC slot */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
@@ -89,10 +164,28 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
- /* LCD */
- GPIOxx_LCD_TFT_16BPP,
-
- /* QCI */
+ /*
+ * LCD
+ * NOTICE Samsung LTP280QV:
+ * cannot use GPIOxx_LCD_TFT_16BPP, GPIO75 is LCD power,
+ * 74 unused (AF0 by bootloader?)
+ */
+ GPIOxx_LCD_16BPP,
+ GPIO76_LCD_PCLK,
+ GPIO77_LCD_BIAS, /* data_valid (v/hsync) (ADS7846 sync?) */
+
+ /* NOTICE valid LCD init sequence */
+
+ /* for GPIO75_MAGICIAN_SAMSUNG_POWER */
+ MFP_CFG_OUT(GPIO75, AF0, DRIVE_HIGH),
+ /* for GPIO106_MAGICIAN_LCD_DCDC_NRESET */
+ MFP_CFG_OUT(GPIO106, AF0, DRIVE_HIGH),
+ /* for GPIO104_MAGICIAN_LCD_VOFF_EN */
+ MFP_CFG_OUT(GPIO104, AF0, DRIVE_HIGH),
+ /* for GPIO105_MAGICIAN_LCD_VON_EN */
+ MFP_CFG_OUT(GPIO105, AF0, DRIVE_HIGH),
+
+ /* QCI camera interface */
GPIO12_CIF_DD_7,
GPIO17_CIF_DD_6,
GPIO50_CIF_DD_3,
@@ -107,25 +200,101 @@ static unsigned long magician_pin_config[] __initdata = {
GPIO85_CIF_LV,
/* Magician specific input GPIOs */
- GPIO9_GPIO, /* unknown */
GPIO10_GPIO, /* GSM_IRQ */
GPIO13_GPIO, /* CPLD_IRQ */
GPIO107_GPIO, /* DS1WM_IRQ */
GPIO108_GPIO, /* GSM_READY */
GPIO115_GPIO, /* nPEN_IRQ */
- /* I2C */
- GPIO117_I2C_SCL,
- GPIO118_I2C_SDA,
+ /* IrDA transmitter(?) disable */
+ MFP_CFG_OUT(GPIO83, AF0, DRIVE_HIGH),
+
+ /* Vibration motor */
+ MFP_CFG_OUT(GPIO22, AF0, DRIVE_LOW),
+
+ /* Keypad LEDs (red/green phone) */
+ MFP_CFG_OUT(GPIO103, AF0, DRIVE_LOW),
+
+ /* GSM pins */
+ MFP_CFG_OUT(GPIO11, AF0, DRIVE_LOW), /* CPU is unavailable(?) */
+ MFP_CFG_OUT(GPIO26, AF0, DRIVE_LOW), /* GSM power, active high */
+ MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH), /* GSM reset, active high */
+
+ /* USB connector */
+ MFP_CFG_OUT(GPIO27, AF0, DRIVE_LOW), /* usbc pull-up enable */
+ MFP_CFG_OUT(GPIO30, AF0, DRIVE_LOW), /* charging enable, active low */
+
+ /* FFUART, FIXME never observed to do something, GSM data? */
+ GPIO34_FFUART_RXD,
+ GPIO35_FFUART_CTS,
+ GPIO36_FFUART_DCD,
+ GPIO39_FFUART_TXD,
+ GPIO41_FFUART_RTS,
+
+ /* BTUART, AT commands/data, HTC port line discipline */
+ GPIO42_BTUART_RXD,
+ GPIO43_BTUART_TXD,
+ GPIO44_BTUART_CTS,
+ GPIO45_BTUART_RTS,
+
+ /* Power I2C, enabled controller will overrule GPIO */
+ GPIO3_GPIO, /* SCL */
+ GPIO4_GPIO, /* SDA */
+
+ /* IrDA GPIOs, if pxaficp, it will change AF accordingly to mode */
+ MFP_CFG_IN(GPIO46, AF0),
+ MFP_CFG_OUT(GPIO47, AF0, DRIVE_LOW),
+ MFP_CFG_OUT(GPIO83, AF0, DRIVE_HIGH),
+
+ /* TODO unknown */
+ GPIO9_GPIO, /* unknown */
+ MFP_CFG_OUT(GPIO40, AF0, DRIVE_LOW), /* FIXME GSM? */
+ MFP_CFG_OUT(GPIO87, AF0, DRIVE_LOW), /* FIXME GSM? */
+
+ /* Left GPIOs (undefined here):
+ * 18, 49 : bootloader=VLIO?, WinM=TODO
+ * 48 : AF0/out0
+ * 56 : AF0/out0
+ * 74 : bootloader=AF0/output
+ * 86 : bootloader=AF0/input (but should be gsm reset???)
+ * 114 : AF0/out0
+ * 119 : AF0/out0
+ * 120 : AF0/out
+ * 1 : dedicated reset, AF0/output
+ * 13 : cpld irq, output (??)
+ */
};
/*
- * IRDA
+ * IrDA
*/
static struct pxaficp_platform_data magician_ficp_info = {
.gpio_pwdown = GPIO83_MAGICIAN_nIR_EN,
- .transceiver_cap = IR_SIRMODE | IR_OFF,
+ /* TODO test with FIR dongle */
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .gpio_pwdown_inverted = 0,
+};
+
+/*
+ * LIRC
+ * IrDA module can receive CIR, but it does not filter the carrier
+ * frequency. Low pass filter in driver (or HW) may be required.
+ */
+
+struct gpio_ir_recv_platform_data lirc_gpio_pdata = {
+ .gpio_nr = GPIO46_MAGICIAN_IR_RX,
+ .map_name = NULL,
+ .allowed_protos = 0,
+ .active_low = 0,
+};
+
+static struct platform_device lirc_gpio = {
+ .name = "gpio-rc-recv",
+ .dev = {
+ .platform_data = &lirc_gpio_pdata,
+ },
+ .id = -1,
};
/*
@@ -134,60 +303,59 @@ static struct pxaficp_platform_data magician_ficp_info = {
#define INIT_KEY(_code, _gpio, _desc) \
{ \
- .code = KEY_##_code, \
- .gpio = _gpio, \
- .desc = _desc, \
- .type = EV_KEY, \
- .wakeup = 1, \
+ .code = KEY_##_code, \
+ .gpio = _gpio, \
+ .desc = _desc, \
+ .type = EV_KEY, \
+ .wakeup = 1, \
}
static struct gpio_keys_button magician_button_table[] = {
- INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"),
- INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"),
- INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"),
- INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"),
- INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"),
- INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"),
- INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"),
- INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"),
- INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"),
- INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"),
- INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"),
- INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"),
+ INIT_KEY(POWER, GPIO0_MAGICIAN_KEY_POWER, "Power button"),
+ INIT_KEY(ESC, GPIO37_MAGICIAN_KEY_HANGUP, "Hangup button"),
+ INIT_KEY(F10, GPIO38_MAGICIAN_KEY_CONTACTS, "Contacts button"),
+ INIT_KEY(CALENDAR, GPIO90_MAGICIAN_KEY_CALENDAR, "Calendar button"),
+ INIT_KEY(CAMERA, GPIO91_MAGICIAN_KEY_CAMERA, "Camera button"),
+ INIT_KEY(UP, GPIO93_MAGICIAN_KEY_UP, "Up button"),
+ INIT_KEY(DOWN, GPIO94_MAGICIAN_KEY_DOWN, "Down button"),
+ INIT_KEY(LEFT, GPIO95_MAGICIAN_KEY_LEFT, "Left button"),
+ INIT_KEY(RIGHT, GPIO96_MAGICIAN_KEY_RIGHT, "Right button"),
+ INIT_KEY(KPENTER, GPIO97_MAGICIAN_KEY_ENTER, "Action button"),
+ INIT_KEY(RECORD, GPIO98_MAGICIAN_KEY_RECORD, "Record button"),
+ INIT_KEY(VOLUMEUP, GPIO100_MAGICIAN_KEY_VOL_UP, "Volume up"),
INIT_KEY(VOLUMEDOWN, GPIO101_MAGICIAN_KEY_VOL_DOWN, "Volume down"),
- INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"),
- INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"),
+ INIT_KEY(PHONE, GPIO102_MAGICIAN_KEY_PHONE, "Phone button"),
+ INIT_KEY(PLAY, GPIO99_MAGICIAN_HEADPHONE_IN, "Headset button"),
};
static struct gpio_keys_platform_data gpio_keys_data = {
- .buttons = magician_button_table,
+ .buttons = magician_button_table,
.nbuttons = ARRAY_SIZE(magician_button_table),
};
static struct platform_device gpio_keys = {
.name = "gpio-keys",
- .dev = {
+ .dev = {
.platform_data = &gpio_keys_data,
},
- .id = -1,
+ .id = -1,
};
-
/*
* EGPIO (Xilinx CPLD)
- *
- * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input
+ * 32-bit aligned
+ * 7x 8-bit registers: 3x output, 1x irq, 3x input
*/
static struct resource egpio_resources[] = {
[0] = {
.start = PXA_CS3_PHYS,
- .end = PXA_CS3_PHYS + 0x20 - 1,
+ .end = PXA_CS3_PHYS + 0x20 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
.flags = IORESOURCE_IRQ,
},
};
@@ -198,7 +366,12 @@ static struct htc_egpio_chip egpio_chips[] = {
.gpio_base = MAGICIAN_EGPIO(0, 0),
.num_gpios = 24,
.direction = HTC_EGPIO_OUTPUT,
- .initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */
+
+ /*
+ * Depends on modules configuration
+ * Things like MMC and LCD should be enabled
+ */
+ .initial_values = 0x21a0c0,
},
[1] = {
.reg_start = 4,
@@ -209,19 +382,19 @@ static struct htc_egpio_chip egpio_chips[] = {
};
static struct htc_egpio_platform_data egpio_info = {
- .reg_width = 8,
- .bus_width = 32,
- .irq_base = IRQ_BOARD_START,
- .num_irqs = 4,
+ .reg_width = 8,
+ .bus_width = 32,
+ .irq_base = IRQ_BOARD_START,
+ .num_irqs = 4,
.ack_register = 3,
- .chip = egpio_chips,
- .num_chips = ARRAY_SIZE(egpio_chips),
+ .chip = egpio_chips,
+ .num_chips = ARRAY_SIZE(egpio_chips),
};
static struct platform_device egpio = {
- .name = "htc-egpio",
- .id = -1,
- .resource = egpio_resources,
+ .name = "htc-egpio",
+ .id = -1,
+ .resource = egpio_resources,
.num_resources = ARRAY_SIZE(egpio_resources),
.dev = {
.platform_data = &egpio_info,
@@ -229,95 +402,89 @@ static struct platform_device egpio = {
};
/*
- * LCD - Toppoly TD028STEB1 or Samsung LTP280QV
+ * PXAFB LCD - Toppoly TD028STEB1 or Samsung LTP280QV
*/
static struct pxafb_mode_info toppoly_modes[] = {
{
- .pixclock = 96153,
- .bpp = 16,
- .xres = 240,
- .yres = 320,
- .hsync_len = 11,
- .vsync_len = 3,
- .left_margin = 19,
+ .pixclock = 96153,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 11,
+ .vsync_len = 3,
+ .left_margin = 19,
.upper_margin = 2,
.right_margin = 10,
.lower_margin = 2,
- .sync = 0,
+ .sync = 0,
},
};
static struct pxafb_mode_info samsung_modes[] = {
{
- .pixclock = 96153,
- .bpp = 16,
- .xres = 240,
- .yres = 320,
- .hsync_len = 8,
- .vsync_len = 4,
- .left_margin = 9,
+ .pixclock = 96153,
+ .bpp = 16,
+ .xres = 240,
+ .yres = 320,
+ .hsync_len = 8,
+ .vsync_len = 4,
+ .left_margin = 9,
.upper_margin = 4,
.right_margin = 9,
.lower_margin = 4,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
},
};
static void toppoly_lcd_power(int on, struct fb_var_screeninfo *si)
{
- pr_debug("Toppoly LCD power\n");
+ pr_debug("Toppoly LCD power: %s\n", on ? "on" : "off");
if (on) {
- pr_debug("on\n");
gpio_set_value(EGPIO_MAGICIAN_TOPPOLY_POWER, 1);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
udelay(2000);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
udelay(2000);
/* FIXME: enable LCDC here */
udelay(2000);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
udelay(2000);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
- pr_debug("off\n");
- msleep(15);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
+ mdelay(15);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
udelay(500);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
udelay(1000);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 0);
}
}
static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
{
- pr_debug("Samsung LCD power\n");
+ pr_debug("Samsung LCD power: %s\n", on ? "on" : "off");
if (on) {
- pr_debug("on\n");
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 1);
else
gpio_set_value(EGPIO_MAGICIAN_LCD_POWER, 1);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 1);
- mdelay(10);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 1);
- mdelay(30);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 1);
- mdelay(10);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 1);
+ mdelay(6); /* Avdd -> Voff >5ms */
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 1);
+ mdelay(16); /* Voff -> Von >(5+10)ms */
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 1);
} else {
- pr_debug("off\n");
- mdelay(10);
- gpio_set_value(GPIO105_MAGICIAN_LCD_POWER_2, 0);
- mdelay(30);
- gpio_set_value(GPIO104_MAGICIAN_LCD_POWER_1, 0);
- mdelay(10);
- gpio_set_value(GPIO106_MAGICIAN_LCD_POWER_3, 0);
- mdelay(10);
+ gpio_set_value(GPIO105_MAGICIAN_LCD_VON_EN, 0);
+ mdelay(16);
+ gpio_set_value(GPIO104_MAGICIAN_LCD_VOFF_EN, 0);
+ mdelay(6);
+ gpio_set_value(GPIO106_MAGICIAN_LCD_DCDC_NRESET, 0);
+ mdelay(6);
if (system_rev < 3)
gpio_set_value(GPIO75_MAGICIAN_SAMSUNG_POWER, 0);
else
@@ -326,19 +493,19 @@ static void samsung_lcd_power(int on, struct fb_var_screeninfo *si)
}
static struct pxafb_mach_info toppoly_info = {
- .modes = toppoly_modes,
- .num_modes = 1,
- .fixed_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP,
+ .modes = toppoly_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP,
.pxafb_lcd_power = toppoly_lcd_power,
};
static struct pxafb_mach_info samsung_info = {
- .modes = samsung_modes,
- .num_modes = 1,
- .fixed_modes = 1,
- .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |\
- LCD_ALTERNATE_MAPPING,
+ .modes = samsung_modes,
+ .num_modes = 1,
+ .fixed_modes = 1,
+ .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+ LCD_ALTERNATE_MAPPING,
.pxafb_lcd_power = samsung_lcd_power,
};
@@ -347,17 +514,22 @@ static struct pxafb_mach_info samsung_info = {
*/
static struct gpio magician_bl_gpios[] = {
- { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
- { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" },
+ { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" },
+ { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Extra backlight power" },
};
static int magician_backlight_init(struct device *dev)
{
- return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
+ int ret;
+
+ pr_debug("Backlight init\n");
+ ret = gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios));
+ return ret;
}
static int magician_backlight_notify(struct device *dev, int brightness)
{
+ pr_debug("Brightness = %i\n", brightness);
gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
if (brightness >= 200) {
gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
@@ -373,28 +545,57 @@ static void magician_backlight_exit(struct device *dev)
gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios));
}
-static struct platform_pwm_backlight_data backlight_data = {
- .pwm_id = 0,
+/*
+ * LCD backlight by PWM (main)
+ * PWM frequency for MP1521 should be:
+ * 100-400 Hz = 2 .5*10^6 - 10 *10^6 ns
+ */
+
+static struct platform_pwm_backlight_data pwm_backlight_data = {
+ .pwm_id = 0,
.max_brightness = 272,
.dft_brightness = 100,
- .pwm_period_ns = 30923,
- .enable_gpio = -1,
- .init = magician_backlight_init,
- .notify = magician_backlight_notify,
- .exit = magician_backlight_exit,
+ .pwm_period_ns = 30923,
+ .enable_gpio = -1,
+ .init = magician_backlight_init,
+ .notify = magician_backlight_notify,
+ .exit = magician_backlight_exit,
};
-static struct platform_device backlight = {
+static struct platform_device pwm_backlight = {
.name = "pwm-backlight",
- .id = -1,
- .dev = {
- .parent = &pxa27x_device_pwm0.dev,
- .platform_data = &backlight_data,
+ .id = -1,
+ .dev = {
+ .parent = &pxa27x_device_pwm0.dev,
+ .platform_data = &pwm_backlight_data,
},
};
+/* Backlight controlled by single GPIO (alternative) */
+static struct gpio_backlight_platform_data gpio_backlight_data = {
+/* .fbdev = &pxa_device_fb.dev, */
+ .gpio = EGPIO_MAGICIAN_BL_POWER,
+ .def_value = 1,
+ .name = "backlight",
+};
+
+static struct platform_device gpio_backlight = {
+ .name = "gpio-backlight",
+ .dev = {
+ .platform_data = &gpio_backlight_data,
+ },
+};
+
+/*
+ * fixed regulator for pwm_backlight
+ */
+
+static struct regulator_consumer_supply pwm_backlight_supply[] = {
+ REGULATOR_SUPPLY("power", "pwm_backlight"),
+};
+
/*
- * LEDs
+ * Phone keys backlight, vibra
*/
static struct gpio_led gpio_leds[] = {
@@ -417,76 +618,135 @@ static struct gpio_led_platform_data gpio_led_info = {
static struct platform_device leds_gpio = {
.name = "leds-gpio",
- .id = -1,
- .dev = {
+ .id = -1,
+ .dev = {
.platform_data = &gpio_led_info,
},
};
+/*
+ * SoC Camera
+ */
+
+static struct pxacamera_platform_data magician_pxacamera_pdata = {
+ .flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+ PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+ .mclk_10khz = 4800,
+};
+
+static int magician_camera_power(struct device *dev, int power)
+{
+ pr_debug("Camera power = %i\n", power);
+
+ gpio_set_value(GPIO116_MAGICIAN_nCAM_EN, !power);
+ mdelay(3);
+
+ return 0;
+}
+
+static int magician_camera_reset(struct device *dev)
+{
+ pr_debug("Camera reset\n");
+
+ gpio_set_value(GPIO57_MAGICIAN_CAM_RESET, 1);
+ mdelay(3);
+ gpio_set_value(GPIO57_MAGICIAN_CAM_RESET, 0);
+ mdelay(3);
+
+ return 0;
+}
+
+static struct i2c_board_info magician_camera_i2c_board_info = {
+ I2C_BOARD_INFO("ov9640", 0x30),
+ .flags = I2C_CLIENT_SCCB,
+};
+
+static struct soc_camera_link magician_camera_iclink = {
+ .bus_id = 0,
+ .flags = SOCAM_DATAWIDTH_8,
+ .i2c_adapter_id = 0,
+ .board_info = &magician_camera_i2c_board_info,
+ .power = magician_camera_power,
+ .reset = magician_camera_reset,
+};
+
+static struct platform_device magician_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &magician_camera_iclink,
+ },
+};
+
+/*
+ * PASIC3: DS1WM, LEDs, sysreset
+ */
+
static struct pasic3_led pasic3_leds[] = {
{
- .led = {
- .name = "magician:red",
+ .cdev = {
+ .name = "magician:red",
.default_trigger = "ds2760-battery.0-charging",
},
.hw_num = 0,
- .bit2 = PASIC3_BIT2_LED0,
- .mask = PASIC3_MASK_LED0,
+ .bit_blink_en = R06_CH0_EN,
+ .bit_force_on = R06_CH0_FORCE_ON,
+ .bit_mask = MASK_CH0,
+ .reg_delay_on = PASIC3_CH0_DELAY_ON,
+ .reg_delay_off = PASIC3_CH0_DELAY_OFF,
},
{
- .led = {
- .name = "magician:green",
+ .cdev = {
+ .name = "magician:green",
.default_trigger = "ds2760-battery.0-charging-or-full",
},
.hw_num = 1,
- .bit2 = PASIC3_BIT2_LED1,
- .mask = PASIC3_MASK_LED1,
+ .bit_blink_en = R06_CH1_EN,
+ .bit_force_on = R06_CH1_FORCE_ON,
+ .bit_mask = MASK_CH1,
+ .reg_delay_on = PASIC3_CH1_DELAY_ON,
+ .reg_delay_off = PASIC3_CH1_DELAY_OFF,
},
{
- .led = {
- .name = "magician:blue",
+ .cdev = {
+ .name = "magician:blue",
.default_trigger = "bluetooth",
},
.hw_num = 2,
- .bit2 = PASIC3_BIT2_LED2,
- .mask = PASIC3_MASK_LED2,
+ .bit_blink_en = R06_CH2_EN,
+ .bit_force_on = R06_CH2_FORCE_ON,
+ .bit_mask = MASK_CH2,
+ .reg_delay_on = PASIC3_CH2_DELAY_ON,
+ .reg_delay_off = PASIC3_CH2_DELAY_OFF,
},
};
-static struct pasic3_leds_machinfo pasic3_leds_info = {
- .num_leds = ARRAY_SIZE(pasic3_leds),
- .power_gpio = EGPIO_MAGICIAN_LED_POWER,
- .leds = pasic3_leds,
-};
-
-/*
- * PASIC3 with DS1WM
- */
-
static struct resource pasic3_resources[] = {
[0] = {
- .start = PXA_CS2_PHYS,
- .end = PXA_CS2_PHYS + 0x1b,
- .flags = IORESOURCE_MEM,
+ .start = PXA_CS2_PHYS,
+ .end = PXA_CS2_PHYS + 0x1b,
+ .flags = IORESOURCE_MEM,
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
- .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
- .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+ .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct pasic3_platform_data pasic3_platform_data = {
- .led_pdata = &pasic3_leds_info,
+ .power_gpio = EGPIO_MAGICIAN_LED_POWER, /* Green LED doesn't use it */
+ .leds = pasic3_leds,
+ .num_leds = ARRAY_SIZE(pasic3_leds),
.clock_rate = 4000000,
};
static struct platform_device pasic3 = {
- .name = "pasic3",
+ .name = "pasic3",
.id = -1,
.num_resources = ARRAY_SIZE(pasic3_resources),
- .resource = pasic3_resources,
+ .resource = pasic3_resources,
.dev = {
.platform_data = &pasic3_platform_data,
},
@@ -496,87 +756,183 @@ static struct platform_device pasic3 = {
* USB "Transceiver"
*/
+#if IS_ENABLED(CONFIG_USB_PXA27X)
+static void magician_udc_command(int cmd)
+{
+ if (cmd == PXA2XX_UDC_CMD_CONNECT)
+ UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE;
+ else if (cmd == PXA2XX_UDC_CMD_DISCONNECT)
+ UP2OCR &= ~(UP2OCR_DPPUE | UP2OCR_DPPUBE);
+}
+
+/* HACK, shared USB connected state with pda-power */
+int my_usb_online = 1;
+
+static int magician_udc_is_connected(void)
+{
+ /* Shared with pda_power or gpio-vbus */
+ return my_usb_online;
+}
+
+static struct pxa2xx_udc_mach_info magician_udc_info __initdata = {
+ .udc_command = magician_udc_command,
+ .udc_is_connected = magician_udc_is_connected,
+ .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
+};
+
+#else
+
+/* GPIO USB client vbus sensing, when no PXA UDC installed */
+
static struct resource gpio_vbus_resource = {
.flags = IORESOURCE_IRQ,
.start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
};
static struct gpio_vbus_mach_info gpio_vbus_info = {
.gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
- .gpio_vbus = EGPIO_MAGICIAN_CABLE_STATE_USB,
+ .gpio_vbus = EGPIO_MAGICIAN_CABLE_INSERT1,
};
static struct platform_device gpio_vbus = {
- .name = "gpio-vbus",
- .id = -1,
+ .name = "gpio-vbus",
+ .id = -1,
.num_resources = 1,
- .resource = &gpio_vbus_resource,
+ .resource = &gpio_vbus_resource,
.dev = {
.platform_data = &gpio_vbus_info,
},
};
+#endif /* IS_ENABLED(CONFIG_USB_PXA27X) */
/*
- * External power
+ * Charging functions
*/
-static int power_supply_init(struct device *dev)
+static int magician_supply_init(struct device *dev)
{
- return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+ int ret = -1;
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_TYPE, "AC charger in USB");
+ if (ret) {
+ pr_err("Cannot request AC/USB charger GPIO (%i)\n", ret);
+ goto err_ac;
+ }
+
+ ret = gpio_request(EGPIO_MAGICIAN_CABLE_INSERT1, "Cable inserted");
+ if (ret) {
+ pr_err("Cannot request cable detection GPIO (%i)\n", ret);
+ goto err_usb;
+ }
+
+ return 0;
+
+err_usb:
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
+err_ac:
+ return ret;
+}
+
+static void magician_set_charge(int flags)
+{
+ /* EGPIO_MAGICIAN_BQ24022_ISET2: =1 500mA, =0 100mA
+ *
+ * RTC NiCd voltage can be read from ADS7846
+ * in0_input=1930, when =0 (after =1 its going up)
+ * in0_input=1367, when =1
+ * in0_input=2499, always (without NiCd)
+ *
+ * FIXME Will disabled NiCd slow accu discharge?
+ *
+ * Charging from USB can be 500mA too
+ * NOTICE: IrDA=on, Vcore=1V, Fcore=104MHz, everything other=off
+ * -> power consumption still over 100mA
+ */
+
+ if (flags & PDA_POWER_CHARGE_AC) {
+ pr_debug("Charging from AC\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else if (flags & PDA_POWER_CHARGE_USB) {
+ pr_debug("Charging from USB\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
+ } else {
+ pr_debug("Charging disabled\n");
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 0);
+ }
+
+ gpio_set_value(EGPIO_MAGICIAN_NICD_CHARGE, 1);
}
static int magician_is_ac_online(void)
{
- return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ return gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERT1) &&
+ gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE); /* AC=1 */
+}
+
+static int magician_is_usb_online(void)
+{
+ my_usb_online = gpio_get_value(EGPIO_MAGICIAN_CABLE_INSERT1) &&
+ (!gpio_get_value(EGPIO_MAGICIAN_CABLE_TYPE)); /* USB=0 */
+ return my_usb_online;
}
-static void power_supply_exit(struct device *dev)
+static void magician_supply_exit(struct device *dev)
{
- gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+ /* HACK FIXME EGPIO pin is used with two drivers */
+ my_usb_online = 1;
+
+ gpio_free(EGPIO_MAGICIAN_CABLE_INSERT1);
+ gpio_free(EGPIO_MAGICIAN_CABLE_TYPE);
}
static char *magician_supplicants[] = {
"ds2760-battery.0", "backup-battery"
};
+/*
+ * pda_power Li-ion charger
+ */
+
static struct pda_power_pdata power_supply_info = {
- .init = power_supply_init,
- .is_ac_online = magician_is_ac_online,
- .exit = power_supply_exit,
- .supplied_to = magician_supplicants,
+ .init = magician_supply_init,
+ .exit = magician_supply_exit,
+ .is_ac_online = magician_is_ac_online,
+ .is_usb_online = magician_is_usb_online,
+ .set_charge = magician_set_charge,
+ .supplied_to = magician_supplicants,
.num_supplicants = ARRAY_SIZE(magician_supplicants),
};
static struct resource power_supply_resources[] = {
[0] = {
- .name = "ac",
+ .name = "ac",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
+ IORESOURCE_IRQ_LOWEDGE,
.start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
[1] = {
- .name = "usb",
+ .name = "usb",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
- IORESOURCE_IRQ_LOWEDGE,
+ IORESOURCE_IRQ_LOWEDGE,
.start = IRQ_MAGICIAN_VBUS,
- .end = IRQ_MAGICIAN_VBUS,
+ .end = IRQ_MAGICIAN_VBUS,
},
};
static struct platform_device power_supply = {
.name = "pda-power",
- .id = -1,
- .dev = {
+ .id = -1,
+ .dev = {
.platform_data = &power_supply_info,
},
- .resource = power_supply_resources,
+ .resource = power_supply_resources,
.num_resources = ARRAY_SIZE(power_supply_resources),
};
/*
- * Battery charger
+ * Charging current switcher
*/
static struct regulator_consumer_supply bq24022_consumers[] = {
@@ -586,11 +942,12 @@ static struct regulator_consumer_supply bq24022_consumers[] = {
static struct regulator_init_data bq24022_init_data = {
.constraints = {
- .max_uA = 500000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
+ .max_uA = 500000,
+ .valid_ops_mask =
+ REGULATOR_CHANGE_CURRENT | REGULATOR_CHANGE_STATUS,
},
- .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
- .consumer_supplies = bq24022_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers),
+ .consumer_supplies = bq24022_consumers,
};
static struct gpio bq24022_gpios[] = {
@@ -607,7 +964,7 @@ static struct gpio_regulator_config bq24022_info = {
.enable_gpio = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN,
.enable_high = 0,
- .enabled_at_boot = 0,
+ .enabled_at_boot = 1,
.gpios = bq24022_gpios,
.nr_gpios = ARRAY_SIZE(bq24022_gpios),
@@ -621,21 +978,98 @@ static struct gpio_regulator_config bq24022_info = {
static struct platform_device bq24022 = {
.name = "gpio-regulator",
- .id = -1,
- .dev = {
+ .id = 2,
+ .dev = {
.platform_data = &bq24022_info,
},
};
/*
+ * fixed regulator for ads7846
+ */
+
+static struct regulator_consumer_supply ads7846_supply =
+ REGULATOR_SUPPLY("vcc", "spi2.0");
+
+static struct regulator_init_data vads7846_regulator = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ads7846_supply,
+};
+
+static struct fixed_voltage_config vads7846 = {
+ .supply_name = "vads7846",
+ .microvolts = 3300000, /* probably */
+ .gpio = -EINVAL,
+ .startup_delay = 0,
+ .init_data = &vads7846_regulator,
+};
+
+static struct platform_device vads7846_device = {
+ .name = "reg-fixed-voltage",
+ .id = 1,
+ .dev = {
+ .platform_data = &vads7846,
+ },
+};
+
+/*
+ * Vcore regulator MAX1587A
+ */
+
+static struct regulator_consumer_supply magician_max1587a_consumers[] = {
+ REGULATOR_SUPPLY("vcc_core", NULL),
+};
+
+static struct regulator_init_data magician_max1587a_v3_info = {
+ .constraints = {
+ .name = "vcc_core range",
+ .min_uV = 700000,
+ .max_uV = 1500000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .consumer_supplies = magician_max1587a_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(magician_max1587a_consumers),
+};
+
+static struct max1586_subdev_data magician_max1587a_subdevs[] = {
+ {
+ .name = "vcc_core",
+ .id = MAX1586_V3,
+ .platform_data = &magician_max1587a_v3_info,
+ }
+};
+
+static struct max1586_platform_data magician_max1587a_info = {
+ .subdevs = magician_max1587a_subdevs,
+ .num_subdevs = ARRAY_SIZE(magician_max1587a_subdevs),
+ /*
+ * NOTICE measured directly on the PCB (board_id == 0x3a), but
+ * if R24 is present, it will boost the voltage
+ * (write 1.475V, get 1.645V and smoke)
+ */
+ .v3_gain = MAX1586_GAIN_NO_R24,
+};
+
+static struct i2c_board_info magician_pwr_i2c_board_info[] __initdata = {
+ {
+ I2C_BOARD_INFO("max1586", 0x14),
+ .platform_data = &magician_max1587a_info,
+ },
+};
+
+/*
* MMC/SD
*/
static int magician_mci_init(struct device *dev,
- irq_handler_t detect_irq, void *data)
+ irq_handler_t detect_irq, void *data)
{
return request_irq(IRQ_MAGICIAN_SD, detect_irq, 0,
- "mmc card detect", data);
+ "mmc card detect", data);
}
static void magician_mci_exit(struct device *dev, void *data)
@@ -644,15 +1078,40 @@ static void magician_mci_exit(struct device *dev, void *data)
}
static struct pxamci_platform_data magician_mci_info = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = magician_mci_init,
- .exit = magician_mci_exit,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .init = magician_mci_init,
+ .exit = magician_mci_exit,
.gpio_card_detect = -1,
.gpio_card_ro = EGPIO_MAGICIAN_nSD_READONLY,
.gpio_card_ro_invert = 1,
.gpio_power = EGPIO_MAGICIAN_SD_POWER,
};
+/*
+ * AUDIO codec UDA1380
+ */
+
+static struct uda1380_platform_data uda1380_info = {
+ .gpio_power = EGPIO_MAGICIAN_CODEC_POWER,
+ .gpio_reset = EGPIO_MAGICIAN_CODEC_RESET,
+ .dac_clk = UDA1380_DAC_CLK_WSPLL,
+};
+
+static struct i2c_board_info magician_audio_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("uda1380", 0x18),
+ .platform_data = &uda1380_info,
+ },
+};
+
+/*
+ * Magician Audio controller
+ */
+
+static struct platform_device magician_audio_device = {
+ .name = "magician-audio",
+ .id = -1,
+};
/*
* USB OHCI
@@ -660,47 +1119,257 @@ static struct pxamci_platform_data magician_mci_info = {
static struct pxaohci_platform_data magician_ohci_info = {
.port_mode = PMM_PERPORT_MODE,
- .flags = ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+ /* port1: CSR Bluetooth, port2: OTG with UDC */
+ .flags = ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
.power_budget = 0,
+ .power_on_delay = 100,
};
-
/*
* StrataFlash
*/
+static int magician_flash_init(struct platform_device *pdev)
+{
+ int ret = gpio_request(EGPIO_MAGICIAN_FLASH_VPP, "flash Vpp enable");
+
+ if (ret) {
+ pr_err("Cannot request flash enable GPIO (%i)\n", ret);
+ return ret;
+ }
+
+ ret = gpio_direction_output(EGPIO_MAGICIAN_FLASH_VPP, 1);
+ if (ret) {
+ pr_err("Cannot set direction for flash enable (%i)\n", ret);
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+ }
+
+ return ret;
+}
+
static void magician_set_vpp(struct platform_device *pdev, int vpp)
{
gpio_set_value(EGPIO_MAGICIAN_FLASH_VPP, vpp);
}
+static void magician_flash_exit(struct platform_device *pdev)
+{
+ gpio_free(EGPIO_MAGICIAN_FLASH_VPP);
+}
+
static struct resource strataflash_resource = {
.start = PXA_CS0_PHYS,
- .end = PXA_CS0_PHYS + SZ_64M - 1,
+ .end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
};
+static struct mtd_partition magician_flash_parts[] = {
+ {
+ .name = "Bootloader", /*htc or will uboot?*/
+ .offset = 0x0,
+ .size = 0x40000,
+ .mask_flags = MTD_WRITEABLE, /* EXPERIMENTAL */
+ },
+ {
+ .name = "Linux Kernel", /*wince or linux?*/
+ .offset = 0x40000,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+#if 1
+/*
+ * physmap-flash driver
+ */
+
static struct physmap_flash_data strataflash_data = {
.width = 4,
+ .init = magician_flash_init,
.set_vpp = magician_set_vpp,
+ .exit = magician_flash_exit,
+ .parts = magician_flash_parts,
+ .nr_parts = ARRAY_SIZE(magician_flash_parts),
};
static struct platform_device strataflash = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &strataflash_resource,
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &strataflash_resource,
.num_resources = 1,
.dev = {
.platform_data = &strataflash_data,
},
};
+#else
+
/*
- * I2C
+ * pxa2xx-flash driver
+ */
+
+static struct flash_platform_data magician_flash_data = {
+ .map_name = "cfi_probe",
+ .parts = magician_flash_parts,
+ .nr_parts = ARRAY_SIZE(magician_flash_parts),
+ .width = 2,
+};
+
+static struct platform_device strataflash = {
+ .name = "pxa2xx-flash",
+ .id = -1,
+ .dev = {
+ .platform_data = &magician_flash_data,
+ },
+ .resource = &strataflash_resource,
+ .num_resources = 1,
+};
+#endif
+
+/*
+ * PXA I2C normal controller (main)
*/
static struct i2c_pxa_platform_data i2c_info = {
- .fast_mode = 1,
+ .fast_mode = 0, /* fast mode seems to be have bit errors */
+ .use_pio = 0, /* no polling */
+};
+
+/*
+ * PXA I2C power controller
+ */
+
+static struct i2c_pxa_platform_data magician_i2c_power_info = {
+ .fast_mode = 0,
+ .use_pio = 0,
+};
+
+/*
+ * GPIO I2C normal controller (alternative)
+ */
+
+static struct i2c_gpio_platform_data rtc_device_data = {
+ .sda_pin = GPIO118_MAGICIAN_I2C_SDA,
+ .scl_pin = GPIO117_MAGICIAN_I2C_SCL,
+ .udelay = 100
+};
+
+static struct platform_device i2c_gpio_bus_alt = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = {
+ .platform_data = &rtc_device_data,
+ }
+};
+
+/* HID should be configurable through configfs */
+#if 0
+/* hid descriptor for a keyboard */
+static struct hidg_func_descriptor my_hid_data = {
+ .subclass = 0, /* No subclass */
+ .protocol = 1, /* Keyboard */
+ .report_length = 8,
+ .report_desc_length = 63,
+ .report_desc = {
+ 0x05, 0x01, /* USAGE_PAGE (Generic Desktop) */
+ 0x09, 0x06, /* USAGE (Keyboard) */
+ 0xa1, 0x01, /* COLLECTION (Application) */
+ 0x05, 0x07, /* USAGE_PAGE (Keyboard) */
+ 0x19, 0xe0, /* USAGE_MINIMUM (Keyboard LeftControl) */
+ 0x29, 0xe7, /* USAGE_MAXIMUM (Keyboard Right GUI) */
+ 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
+ 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
+ 0x75, 0x01, /* REPORT_SIZE (1) */
+ 0x95, 0x08, /* REPORT_COUNT (8) */
+ 0x81, 0x02, /* INPUT (Data,Var,Abs) */
+ 0x95, 0x01, /* REPORT_COUNT (1) */
+ 0x75, 0x08, /* REPORT_SIZE (8) */
+ 0x81, 0x03, /* INPUT (Cnst,Var,Abs) */
+ 0x95, 0x05, /* REPORT_COUNT (5) */
+ 0x75, 0x01, /* REPORT_SIZE (1) */
+ 0x05, 0x08, /* USAGE_PAGE (LEDs) */
+ 0x19, 0x01, /* USAGE_MINIMUM (Num Lock) */
+ 0x29, 0x05, /* USAGE_MAXIMUM (Kana) */
+ 0x91, 0x02, /* OUTPUT (Data,Var,Abs) */
+ 0x95, 0x01, /* REPORT_COUNT (1) */
+ 0x75, 0x03, /* REPORT_SIZE (3) */
+ 0x91, 0x03, /* OUTPUT (Cnst,Var,Abs) */
+ 0x95, 0x06, /* REPORT_COUNT (6) */
+ 0x75, 0x08, /* REPORT_SIZE (8) */
+ 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
+ 0x25, 0x65, /* LOGICAL_MAXIMUM (101) */
+ 0x05, 0x07, /* USAGE_PAGE (Keyboard) */
+ 0x19, 0x00, /* USAGE_MINIMUM (Reserved) */
+ 0x29, 0x65, /* USAGE_MAXIMUM (Keyboard Application) */
+ 0x81, 0x00, /* INPUT (Data,Ary,Abs) */
+ 0xc0 /* END_COLLECTION */
+ }
+};
+
+static struct platform_device my_hid = {
+ .name = "hidg",
+ .id = 0,
+ .num_resources = 0,
+ .resource = 0,
+ .dev.platform_data = &my_hid_data,
+};
+#endif
+
+static struct ads7846_platform_data ads7846_pdata = {
+ .model = 7846,
+ .x_min = 0,
+ .y_min = 0,
+ .x_max = 4096,
+ .y_max = 4096,
+ .x_plate_ohms = 320, /* measured */
+ .y_plate_ohms = 500,
+ .pressure_max = 255, /* up to 12bit sampling */
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .gpio_pendown = GPIO115_MAGICIAN_nPEN_IRQ,
+ .keep_vref_on = 1, /* FIXME, external Vref? */
+ .vref_delay_usecs = 100,
+ /* .wait_for_sync, GPIO77_LCD_BIAS low noise measure, latency! */
+};
+
+struct pxa2xx_spi_chip tsc2046_chip_info = {
+ .tx_threshold = 1,
+ .rx_threshold = 2,
+ .timeout = 64,
+ .gpio_cs = -1,
+};
+
+static struct pxa2xx_spi_master magician_spi_info = {
+ .num_chipselect = 1,
+/* .enable_dma = 1, */ /* FIXME probably unnecessary */
+};
+
+static struct spi_board_info ads7846_spi_board_info[] __initdata = {
+ {
+ .modalias = "ads7846",
+ .bus_num = 2,
+ .max_speed_hz = 1857143,
+ .platform_data = &ads7846_pdata,
+ .controller_data = &tsc2046_chip_info,
+ .irq = PXA_GPIO_TO_IRQ(GPIO115_MAGICIAN_nPEN_IRQ),
+ },
+};
+
+/*
+ * Global GPIOs
+ */
+
+static struct gpio magician_global_gpios[] = {
+ { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
+ { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
+
+ /* NOTICE valid LCD init sequence */
+ { GPIO106_MAGICIAN_LCD_DCDC_NRESET, GPIOF_OUT_INIT_HIGH,
+ "LCD DCDC nreset" },
+ { GPIO104_MAGICIAN_LCD_VOFF_EN, GPIOF_OUT_INIT_HIGH,
+ "LCD VOFF enable" },
+ { GPIO105_MAGICIAN_LCD_VON_EN, GPIOF_OUT_INIT_HIGH,
+ "LCD VON enable" },
};
/*
@@ -708,24 +1377,35 @@ static struct i2c_pxa_platform_data i2c_info = {
*/
static struct platform_device *devices[] __initdata = {
- &gpio_keys,
&egpio,
- &backlight,
&pasic3,
- &bq24022,
- &gpio_vbus,
- &power_supply,
+ &gpio_keys,
+ &magician_camera,
+ &vads7846_device,
&strataflash,
&leds_gpio,
-};
+ &magician_audio_device,
-static struct gpio magician_global_gpios[] = {
- { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" },
- { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" },
- { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" },
- { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" },
- { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" },
- { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" },
+ /* NOTICE mutually exclusive */
+ &power_supply,
+ &bq24022,
+
+ /* NOTICE mutually exclusive with UDC*/
+#if !(IS_ENABLED(CONFIG_USB_PXA27X))
+ &gpio_vbus,
+#endif
+
+ /* NOTICE mutually exclusive with PXA I2C */
+ &i2c_gpio_bus_alt,
+
+ /* NOTICE mutually exclusive */
+ &pwm_backlight,
+ &gpio_backlight,
+
+ &lirc_gpio,
+#if 0
+ &my_hid, /* HID should be configurable through configfs */
+#endif
};
static void __init magician_init(void)
@@ -735,21 +1415,27 @@ static void __init magician_init(void)
int err;
pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
+
err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios));
if (err)
- pr_err("magician: Failed to request GPIOs: %d\n", err);
+ pr_err("magician: Failed to request global GPIOs: %d\n", err);
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
-
- platform_add_devices(ARRAY_AND_SIZE(devices));
-
pxa_set_ficp_info(&magician_ficp_info);
- pxa27x_set_i2c_power_info(NULL);
+
+ pxa27x_set_i2c_power_info(&magician_i2c_power_info);
pxa_set_i2c_info(&i2c_info);
+
+ i2c_register_board_info(0,
+ ARRAY_AND_SIZE(magician_audio_i2c_devices));
+ i2c_register_board_info(1,
+ ARRAY_AND_SIZE(magician_pwr_i2c_board_info));
+
pxa_set_mci_info(&magician_mci_info);
pxa_set_ohci_info(&magician_ohci_info);
+ pxa_set_udc_info(&magician_udc_info);
/* Check LCD type we have */
cpld = ioremap_nocache(PXA_CS3_PHYS, 0x1000);
@@ -758,15 +1444,29 @@ static void __init magician_init(void)
iounmap(cpld);
system_rev = board_id & 0x7;
lcd_select = board_id & 0x8;
- pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly");
+ pr_info("LCD type: %s, board type: 0x%02x\n",
+ lcd_select ? "Samsung" : "Toppoly",
+ board_id);
+
if (lcd_select && (system_rev < 3))
+ /* NOTICE valid LCD init sequence */
gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER,
- GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER");
+ GPIOF_OUT_INIT_HIGH, "LCD Samsung Power");
+
pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info);
} else
pr_err("LCD detection: CPLD mapping failed\n");
-}
+ pxa2xx_set_spi_info(2, &magician_spi_info);
+ spi_register_board_info(ARRAY_AND_SIZE(ads7846_spi_board_info));
+
+ pxa_set_camera_info(&magician_pxacamera_pdata);
+
+ regulator_register_always_on(0, "power", pwm_backlight_supply,
+ ARRAY_SIZE(pwm_backlight_supply), 5000000);
+
+ platform_add_devices(ARRAY_AND_SIZE(devices));
+}
MACHINE_START(MAGICIAN, "HTC Magician")
.atag_offset = 0x100,
@@ -586,6 +586,15 @@ config LEDS_PM8941_WLED
This option enables support for the 'White' LED block
on Qualcomm PM8941 PMICs.
+config LEDS_PASIC3
+ tristate "LED support for the HTC Magician/Alpine PASIC3"
+ depends on LEDS_CLASS
+ depends on HTC_PASIC3
+ select REGMAP
+ help
+ This option enables support for the PASIC3 chip (different chip
+ than Compaq ASIC3).
+
comment "LED Triggers"
source "drivers/leds/trigger/Kconfig"
@@ -65,6 +65,7 @@ obj-$(CONFIG_LEDS_VERSATILE) += leds-versatile.o
obj-$(CONFIG_LEDS_MENF21BMC) += leds-menf21bmc.o
obj-$(CONFIG_LEDS_PM8941_WLED) += leds-pm8941-wled.o
obj-$(CONFIG_LEDS_KTD2692) += leds-ktd2692.o
+obj-$(CONFIG_LEDS_PASIC3) += leds-pasic3.o
# LED SPI Drivers
obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o
new file mode 100644
@@ -0,0 +1,192 @@
+/*
+ * AIC3 (or PASIC3) LED driver for HTC Magician/Alpine/.. (not Compaq ASIC3)
+ *
+ * Copyright (c) 2015 Petr Cvek <petr.cvek@tul.cz>
+ *
+ * Based on leds-asic3.c driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/htc-pasic3.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+
+/*
+ * 1 tick is around 62-63 ms, blinking settings (on+off):
+ * Min: 1+1 ticks ~125ms
+ * Max: 127+127 ticks ~15 875ms
+ * Sometimes takes time to change after write (counter overflow?)
+ */
+
+#define MS_TO_CLK(ms) DIV_ROUND_CLOSEST(((ms)*1024), 64000)
+#define CLK_TO_MS(clk) (((clk)*64000)/1024)
+#define MAX_CLK 254 /* 127 + 127 (2x 7 bit reg) */
+#define MAX_MS CLK_TO_MS(MAX_CLK)
+
+static void brightness_set(struct led_classdev *cdev,
+ enum led_brightness value)
+{
+ struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct pasic3_led *led;
+ struct device *dev;
+ u8 val;
+
+ if (!cell->platform_data) {
+ pr_err("No platform data\n");
+ return;
+ }
+
+ led = cell->platform_data;
+ dev = pdev->dev.parent;
+
+ if (value == LED_OFF) {
+ val = pasic3_read_register(dev, PASIC3_CH_CONTROL);
+ pasic3_write_register(dev, PASIC3_CH_CONTROL,
+ val & ~(led->bit_blink_en | led->bit_force_on));
+
+ val = pasic3_read_register(dev, PASIC3_MASK_A);
+ pasic3_write_register(dev, PASIC3_MASK_A, val & ~led->bit_mask);
+ } else {
+ val = pasic3_read_register(dev, PASIC3_CH_CONTROL);
+ pasic3_write_register(dev, PASIC3_CH_CONTROL,
+ val | led->bit_force_on);
+ }
+}
+
+static int blink_set(struct led_classdev *cdev,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ struct platform_device *pdev = to_platform_device(cdev->dev->parent);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct device *dev;
+ struct pasic3_led *led;
+ u32 on, off;
+ u8 val;
+
+ if (!cell->platform_data) {
+ pr_err("No platform data\n");
+ return -EINVAL;
+ }
+
+ if (*delay_on > MAX_MS || *delay_off > MAX_MS)
+ return -EINVAL;
+
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* If both are zero then a sensible default should be chosen */
+ on = MS_TO_CLK(500);
+ off = MS_TO_CLK(500);
+ } else {
+ on = MS_TO_CLK(*delay_on);
+ off = MS_TO_CLK(*delay_off);
+ if ((on + off) > MAX_CLK)
+ return -EINVAL;
+ /* Minimal value must be 1 */
+ on = on ? on : 1;
+ off = off ? off : 1;
+ }
+
+ led = cell->platform_data;
+ dev = pdev->dev.parent;
+
+ pasic3_write_register(dev, led->reg_delay_on, on);
+ pasic3_write_register(dev, led->reg_delay_off, off);
+
+ val = pasic3_read_register(dev, PASIC3_CH_CONTROL);
+ pasic3_write_register(dev, PASIC3_CH_CONTROL, val | led->bit_blink_en);
+
+ *delay_on = CLK_TO_MS(on);
+ *delay_off = CLK_TO_MS(off);
+
+ return 0;
+}
+
+static int pasic3_led_probe(struct platform_device *pdev)
+{
+ struct pasic3_led *led = dev_get_platdata(&pdev->dev);
+ int ret;
+
+ ret = mfd_cell_enable(pdev);
+ if (ret < 0)
+ return ret;
+
+ led->cdev.flags = LED_CORE_SUSPENDRESUME;
+ led->cdev.brightness_set = brightness_set;
+ led->cdev.blink_set = blink_set;
+
+ ret = led_classdev_register(&pdev->dev, &led->cdev);
+ if (ret < 0)
+ goto out;
+
+ return 0;
+
+out:
+ (void) mfd_cell_disable(pdev);
+ return ret;
+}
+
+static int pasic3_led_remove(struct platform_device *pdev)
+{
+ struct pasic3_led *led = dev_get_platdata(&pdev->dev);
+
+ led_classdev_unregister(&led->cdev);
+
+ return mfd_cell_disable(pdev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pasic3_led_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->suspend)
+ ret = (*cell->suspend)(pdev);
+
+ return ret;
+}
+
+static int pasic3_led_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ int ret;
+
+ ret = 0;
+ if (cell->resume)
+ ret = (*cell->resume)(pdev);
+
+ return ret;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pasic3_led_pm_ops, pasic3_led_suspend,
+ pasic3_led_resume);
+
+static struct platform_driver pasic3_led_driver = {
+ .probe = pasic3_led_probe,
+ .remove = pasic3_led_remove,
+ .driver = {
+ .name = "leds-pasic3",
+ .pm = &pasic3_led_pm_ops,
+ },
+};
+
+module_platform_driver(pasic3_led_driver);
+
+MODULE_AUTHOR("Petr Cvek <petr.cvek@tul.cz>");
+MODULE_DESCRIPTION("HTC Magician PASIC3 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-pasic3");
@@ -3,6 +3,9 @@
*
* Copyright (C) 2006 Philipp Zabel <philipp.zabel@gmail.com>
*
+ * LED support:
+ * Copyright (C) 2015 Petr Cvek <petr.cvek@tul.cz>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
@@ -65,8 +68,76 @@ EXPORT_SYMBOL(pasic3_read_register); /* for leds-pasic3 */
* LEDs
*/
-static struct mfd_cell led_cell __initdata = {
- .name = "leds-pasic3",
+
+static int pasic3_leds_enable(struct platform_device *pdev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct pasic3_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct pasic3_led *led;
+
+ led = cell->platform_data;
+ pdata = led->pdata;
+
+ gpio_set_value(pdata->power_gpio, 1);
+
+ return 0;
+}
+
+static int pasic3_leds_disable(struct platform_device *pdev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct pasic3_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct pasic3_led *led;
+
+ led = cell->platform_data;
+ pdata = led->pdata;
+
+ gpio_set_value(pdata->power_gpio, 0);
+
+ return 0;
+}
+
+static int pasic3_leds_suspend(struct platform_device *pdev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(pdev);
+ struct pasic3_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct pasic3_led *led;
+
+ led = cell->platform_data;
+ pdata = led->pdata;
+
+ gpio_set_value(pdata->power_gpio, 0);
+
+ return 0;
+}
+
+#define PASIC3_NUM_LEDS 3
+
+static struct mfd_cell pasic3_cell_leds[PASIC3_NUM_LEDS] = {
+ [0] = {
+ .name = "leds-pasic3",
+ .id = 0,
+ .enable = pasic3_leds_enable,
+ .disable = pasic3_leds_disable,
+ .suspend = pasic3_leds_suspend,
+ .resume = pasic3_leds_enable,
+ },
+ [1] = {
+ .name = "leds-pasic3",
+ .id = 1,
+ .enable = pasic3_leds_enable,
+ .disable = pasic3_leds_disable,
+ .suspend = pasic3_leds_suspend,
+ .resume = pasic3_leds_enable,
+ },
+ [2] = {
+ .name = "leds-pasic3",
+ .id = 2,
+ .enable = pasic3_leds_enable,
+ .disable = pasic3_leds_disable,
+ .suspend = pasic3_leds_suspend,
+ .resume = pasic3_leds_enable,
+ },
};
/*
@@ -78,10 +149,10 @@ static int ds1wm_enable(struct platform_device *pdev)
struct device *dev = pdev->dev.parent;
int c;
- c = pasic3_read_register(dev, 0x28);
- pasic3_write_register(dev, 0x28, c & 0x7f);
+ c = pasic3_read_register(dev, PASIC3_GPIO);
+ pasic3_write_register(dev, PASIC3_GPIO, c & ~DS1WM_nEN);
- dev_dbg(dev, "DS1WM OWM_EN low (active) %02x\n", c & 0x7f);
+ dev_dbg(dev, "DS1WM OWM_EN low (active) %02x\n", c & ~DS1WM_nEN);
return 0;
}
@@ -90,10 +161,10 @@ static int ds1wm_disable(struct platform_device *pdev)
struct device *dev = pdev->dev.parent;
int c;
- c = pasic3_read_register(dev, 0x28);
- pasic3_write_register(dev, 0x28, c | 0x80);
+ c = pasic3_read_register(dev, PASIC3_GPIO);
+ pasic3_write_register(dev, PASIC3_GPIO, c | DS1WM_nEN);
- dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02x\n", c | 0x80);
+ dev_dbg(dev, "DS1WM OWM_EN high (inactive) %02x\n", c | DS1WM_nEN);
return 0;
}
@@ -172,13 +243,27 @@ static int __init pasic3_probe(struct platform_device *pdev)
dev_warn(dev, "failed to register DS1WM\n");
}
- if (pdata && pdata->led_pdata) {
- led_cell.platform_data = pdata->led_pdata;
- led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo);
- ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r,
- 0, NULL);
+ if (pdata && pdata->leds) {
+ int i;
+
+ for (i = 0; i < PASIC3_NUM_LEDS; ++i) {
+ pdata->leds[i].pdata = pdata;
+ pasic3_cell_leds[i].platform_data = &pdata->leds[i];
+ pasic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]);
+ }
+ ret = mfd_add_devices(&pdev->dev, 0,
+ pasic3_cell_leds, PASIC3_NUM_LEDS, NULL, 0, NULL);
+
if (ret < 0)
dev_warn(dev, "failed to register LED device\n");
+
+ if (pdata->power_gpio) {
+ ret = gpio_request(pdata->power_gpio,
+ "Red-Blue LED Power");
+ if (ret < 0)
+ dev_warn(dev, "failed to request power GPIO\n");
+ }
+
}
return 0;
@@ -187,10 +272,14 @@ static int __init pasic3_probe(struct platform_device *pdev)
static int pasic3_remove(struct platform_device *pdev)
{
struct pasic3_data *asic = platform_get_drvdata(pdev);
+ struct pasic3_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct resource *r;
mfd_remove_devices(&pdev->dev);
+ if (pdata->power_gpio)
+ gpio_free(pdata->power_gpio);
+
iounmap(asic->mapping);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
release_mem_region(r->start, resource_size(r));
@@ -18,36 +18,65 @@
extern void pasic3_write_register(struct device *dev, u32 reg, u8 val);
extern u8 pasic3_read_register(struct device *dev, u32 reg);
-/*
- * mask for registers 0x20,0x21,0x22
- */
-#define PASIC3_MASK_LED0 0x04
-#define PASIC3_MASK_LED1 0x08
-#define PASIC3_MASK_LED2 0x40
+#define PASIC3_CH0_DELAY_ON 0x00
+#define PASIC3_CH0_DELAY_OFF 0x01
+#define PASIC3_CH1_DELAY_ON 0x02
+#define PASIC3_CH1_DELAY_OFF 0x03
+#define PASIC3_CH2_DELAY_ON 0x04
+#define PASIC3_CH2_DELAY_OFF 0x05
+#define PASIC3_DELAY_MASK 0x7f
+
+#define PASIC3_CH_CONTROL 0x06
+#define R06_CH0_EN (1<<0)
+#define R06_CH1_EN (1<<1)
+#define R06_CH2_EN (1<<2)
+#define R06_CH0_FORCE_ON (1<<3)
+#define R06_CH1_FORCE_ON (1<<4)
+#define R06_CH2_FORCE_ON (1<<5)
/*
- * bits in register 0x06
+ * pwm_ch0_out | force_on | (bit0 & bit1 & bit2)
+ * pwm_ch1_out | force_on | (bit0 & bit1 & bit2)
+ * pwm_ch2_out | force_on | (bit2?bit0:(bit0 & ! bit1))
*/
-#define PASIC3_BIT2_LED0 0x08
-#define PASIC3_BIT2_LED1 0x10
-#define PASIC3_BIT2_LED2 0x20
+
+#define PASIC3_MASK_A 0x20
+#define PASIC3_MASK_B 0x21
+#define PASIC3_MASK_C 0x22
+#define MASK_CH0 (1<<2)
+#define MASK_CH1 (1<<3)
+#define MASK_CH2 (1<<6)
+#define PASIC3_GPIO 0x28
+
+#define DS1WM_nEN (1<<7)
+#define PASIC3_SYS 0x2a
+/* NORMAL_RST, CAM_PWR_RST and UNKNOWN will autoclear, set STATUS */
+#define NORMAL_RST (1<<0)
+#define CAM_PWR_RST (1<<1)
+#define UNKNOWN (1<<2)
+#define STATUS_NORMAL_RST (1<<4)
+#define STATUS_CAM_PWR_RST (1<<5)
+#define STATUS_UNKNOWN (1<<6)
+
+#define PASIC3_RST_EN 0x2c
+#define EN_NORMAL_RST 0x40
+#define EN_DOOR_RST 0x42
struct pasic3_led {
- struct led_classdev led;
- unsigned int hw_num;
- unsigned int bit2;
- unsigned int mask;
- struct pasic3_leds_machinfo *pdata;
+ struct led_classdev cdev;
+ unsigned int hw_num;
+ unsigned char bit_blink_en;
+ unsigned char bit_force_on;
+ unsigned char bit_mask;
+ unsigned char reg_delay_on;
+ unsigned char reg_delay_off;
+ struct pasic3_platform_data *pdata;
};
-struct pasic3_leds_machinfo {
+struct pasic3_platform_data {
unsigned int num_leds;
unsigned int power_gpio;
struct pasic3_led *leds;
-};
-
-struct pasic3_platform_data {
- struct pasic3_leds_machinfo *led_pdata;
unsigned int clock_rate;
};
Fixing original code: Problems to successful boot due to the bad LCD power sequence (wrongly configured GPIO). Add/fix platform data and helper function for various hardware (touchscreen, audio, USB device, ...). Add new discovered GPIOs and fix names by GPIO context. Add new LEDs driver. Signed-off-by: Petr Cvek <petr.cvek@tul.cz> --- arch/arm/mach-pxa/Kconfig | 1 + arch/arm/mach-pxa/include/mach/magician.h | 21 +- arch/arm/mach-pxa/magician.c | 1148 +++++++++++++++++++++++------ drivers/leds/Kconfig | 9 + drivers/leds/Makefile | 1 + drivers/leds/leds-pasic3.c | 192 +++++ drivers/mfd/htc-pasic3.c | 115 ++- include/linux/mfd/htc-pasic3.h | 69 +- 8 files changed, 1293 insertions(+), 263 deletions(-) create mode 100644 drivers/leds/leds-pasic3.c