diff mbox

[U-Boot,1/2] sunxi: Fix gmac not working on the Colombus board

Message ID 1438884819-18332-1-git-send-email-hdegoede@redhat.com
State Accepted
Delegated to: Hans de Goede
Headers show

Commit Message

Hans de Goede Aug. 6, 2015, 6:13 p.m. UTC
The phy is using a RGMII interface, which we need to specify in our
board-config, and the dts needs a gmac section (the dts changes have
also been submitted to the kernel).

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/dts/sun6i-a31-colombus.dts | 12 ++++++++++++
 configs/Colombus_defconfig          |  2 +-
 2 files changed, 13 insertions(+), 1 deletion(-)

Comments

Ian Campbell Aug. 11, 2015, 7:47 a.m. UTC | #1
On Thu, 2015-08-06 at 20:13 +0200, Hans de Goede wrote:
> The phy is using a RGMII interface, which we need to specify in our
> board-config, and the dts needs a gmac section (the dts changes have
> also been submitted to the kernel).
> 
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff mbox

Patch

diff --git a/arch/arm/dts/sun6i-a31-colombus.dts b/arch/arm/dts/sun6i-a31-colombus.dts
index 0cf9926..0d0b6f2 100644
--- a/arch/arm/dts/sun6i-a31-colombus.dts
+++ b/arch/arm/dts/sun6i-a31-colombus.dts
@@ -66,6 +66,18 @@ 
 	status = "okay";
 };
 
+&gmac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac_pins_rgmii_a>;
+	phy = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins_a>;
diff --git a/configs/Colombus_defconfig b/configs/Colombus_defconfig
index 1ae8c16..7fa9ef1 100644
--- a/configs/Colombus_defconfig
+++ b/configs/Colombus_defconfig
@@ -7,7 +7,7 @@  CONFIG_USB1_VBUS_PIN=""
 CONFIG_DEFAULT_DEVICE_TREE="sun6i-a31-colombus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC"
+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII"
 # CONFIG_CMD_IMLS is not set
 # CONFIG_CMD_FLASH is not set
 # CONFIG_CMD_FPGA is not set