@@ -188,10 +188,7 @@ static int rx8025_get_time(struct device *dev, struct rtc_time *dt)
dt->tm_mday = bcd2bin(date[RX8025_REG_MDAY] & 0x3f);
dt->tm_mon = bcd2bin(date[RX8025_REG_MONTH] & 0x1f) - 1;
- dt->tm_year = bcd2bin(date[RX8025_REG_YEAR]);
-
- if (dt->tm_year < 70)
- dt->tm_year += 100;
+ dt->tm_year = bcd2bin(date[RX8025_REG_YEAR]) + 100;
dev_dbg(dev, "%s: date %ds %dm %dh %dmd %dm %dy\n", __func__,
dt->tm_sec, dt->tm_min, dt->tm_hour,
@@ -205,11 +202,8 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
struct rx8025_data *rx8025 = dev_get_drvdata(dev);
u8 date[7];
- /*
- * BUG: The HW assumes every year that is a multiple of 4 to be a leap
- * year. Next time this is wrong is 2100, which will not be a leap
- * year.
- */
+ if ((dt->tm_year < 100) || (dt->tm_year > 199))
+ return -EINVAL;
/*
* Here the read-only bits are written as "0". I'm not sure if that
@@ -226,7 +220,7 @@ static int rx8025_set_time(struct device *dev, struct rtc_time *dt)
date[RX8025_REG_WDAY] = bin2bcd(dt->tm_wday);
date[RX8025_REG_MDAY] = bin2bcd(dt->tm_mday);
date[RX8025_REG_MONTH] = bin2bcd(dt->tm_mon + 1);
- date[RX8025_REG_YEAR] = bin2bcd(dt->tm_year % 100);
+ date[RX8025_REG_YEAR] = bin2bcd(dt->tm_year - 100);
dev_dbg(dev,
"%s: write 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n",
The hardware is only capable of handling dates between 2000 and 2099, enforce that. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- drivers/rtc/rtc-rx8025.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-)