| Message ID | 1438208335-19457-2-git-send-email-keith.busch@intel.com |
|---|---|
| State | Superseded |
| Headers | show |
On Wed, Jul 29, 2015 at 04:18:53PM -0600, Keith Busch wrote: > A hot plugged PCI-e device max payload size (MPS) defaults to 0 for > 128bytes. The device is not usable if the upstream port is configured > to a higher setting. > > Bus configuration was previously done by arch specific and hot plug code > after the root port or bridge was scanned, and default behavior logged a > warning without changing the setting if there was a problem. This patch > unifies tuning with a default policy that affects only misconfigured > downstream devices, and preserves existing end result if a non-default > bus tuning is used (ex: pci=pcie_bus_safe). > > The new pcie tuning will check the device's MPS against the parent bridge > when it is initially added to the pci subsystem, prior to attaching > to a driver. If MPS is mismatched, the downstream port is set to the > parent bridge's if capable. This is a little confusing (at least, *I'm* confused). You're talking about setting the MPS configuration of the "downstream port," but I think you are talking about either a Switch Upstream Port or an Endpoint. Such a port is indeed *downstream* from the parent bridge, but referring to it as a "downstream port" risks confusing it with the parent bridge, which is either a Switch Downstream Port or a Root Port. > This is safe to change here since the device > being configured is not bound to a driver and does not affect previously > configured devices in the domain hierarchy. > > A device incapable of matching the upstream bridge will log a > warning message and not bind to a driver. This is the safe option since > proper MPS configuration must consider the entire hierarchy between > communicating end points, and we can't safely modify a root port's > subtree MPS settings while it is in use. > > Since the bus is configured everytime a bridge is scanned, this > potentially creates unnecessary re-walking of an already configured > sub-tree, but the code only executes during root port initialization, > hot adding a switch, or explicit request to rescan. > > Signed-off-by: Keith Busch <keith.busch@intel.com> > Cc: Dave Jiang <dave.jiang@intel.com> > Cc: Austin Bolen <Austin_Bolen@Dell.com> > Cc: Myron Stowe <mstowe@redhat.com> > Cc: Jon Mason <jdmason@kudzu.us> > Cc: Bjorn Helgaas <bhelgaas@google.com> > --- > arch/arm/kernel/bios32.c | 12 ------------ > arch/powerpc/kernel/pci-common.c | 7 ------- > arch/tile/kernel/pci_gx.c | 4 ---- > arch/x86/pci/acpi.c | 9 --------- > drivers/pci/bus.c | 4 ++++ > drivers/pci/hotplug/acpiphp_glue.c | 1 - > drivers/pci/hotplug/pciehp_pci.c | 1 - > drivers/pci/hotplug/shpchp_pci.c | 1 - > drivers/pci/probe.c | 27 ++++++++++++++++++++++----- > include/linux/pci.h | 2 -- > 10 files changed, 26 insertions(+), 42 deletions(-) > > diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c > index fcbbbb1..4fff58e 100644 > --- a/arch/arm/kernel/bios32.c > +++ b/arch/arm/kernel/bios32.c > @@ -537,18 +537,6 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) > */ > pci_bus_add_devices(bus); > } > - > - list_for_each_entry(sys, &head, node) { > - struct pci_bus *bus = sys->bus; > - > - /* Configure PCI Express settings */ > - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { > - struct pci_bus *child; > - > - list_for_each_entry(child, &bus->children, node) > - pcie_bus_configure_settings(child); > - } > - } I think nothing terrible happens if we call pcie_bus_configure_settings() more than once (we might get some duplicate messages, but I don't consider that terrible). If that's true, maybe we could split the removal of these calls into a separate patch. It doesn't need to be a separate patch for every arch, but I think getting the "redundant code removal" out of this patch will make the interesting changes more obvious. > } > > #ifndef CONFIG_PCI_HOST_ITE8152 > diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c > index b9de34d..7f27ffe 100644 > --- a/arch/powerpc/kernel/pci-common.c > +++ b/arch/powerpc/kernel/pci-common.c > @@ -1682,13 +1682,6 @@ void pcibios_scan_phb(struct pci_controller *hose) > */ > if (ppc_md.pcibios_fixup_phb) > ppc_md.pcibios_fixup_phb(hose); > - > - /* Configure PCI Express settings */ > - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { > - struct pci_bus *child; > - list_for_each_entry(child, &bus->children, node) > - pcie_bus_configure_settings(child); > - } > } > EXPORT_SYMBOL_GPL(pcibios_scan_phb); > > diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c > index b1df847..67492fb 100644 > --- a/arch/tile/kernel/pci_gx.c > +++ b/arch/tile/kernel/pci_gx.c > @@ -599,10 +599,6 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller) > __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, > rc_dev_cap.word); > > - /* Configure PCI Express MPS setting. */ > - list_for_each_entry(child, &root_bus->children, node) > - pcie_bus_configure_settings(child); > - > /* > * Set the mac_config register in trio based on the MPS/MRS of the link. > */ > diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c > index ff99117..ab5977a 100644 > --- a/arch/x86/pci/acpi.c > +++ b/arch/x86/pci/acpi.c > @@ -478,15 +478,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) > } > } > > - /* After the PCI-E bus has been walked and all devices discovered, > - * configure any settings of the fabric that might be necessary. > - */ > - if (bus) { > - struct pci_bus *child; > - list_for_each_entry(child, &bus->children, node) > - pcie_bus_configure_settings(child); > - } > - > if (bus && node != NUMA_NO_NODE) > dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node); > > diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c > index 6fbd3f2..8f8428a 100644 > --- a/drivers/pci/bus.c > +++ b/drivers/pci/bus.c > @@ -277,6 +277,10 @@ void pci_bus_add_device(struct pci_dev *dev) > { > int retval; > > + if (dev->bus->self && > + pcie_get_mps(dev) != pcie_get_mps(dev->bus->self)) > + return; This part looks like it could be in its own separate patch that basically enforces the "if we can't safely configure this device's MPS setting, prevent drivers from using the device" idea. What happens in this case? Does the device still appear in sysfs and lspci, even if we can't configure its MPS safely? This seems like good place for a dev_warn(). > /* > * Can not put in pci_device_add yet because resources > * are not assigned yet for some devices. > diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c > index ff53856..cd98649 100644 > --- a/drivers/pci/hotplug/acpiphp_glue.c > +++ b/drivers/pci/hotplug/acpiphp_glue.c > @@ -509,7 +509,6 @@ static void enable_slot(struct acpiphp_slot *slot) > __pci_bus_assign_resources(bus, &add_list, NULL); > > acpiphp_sanitize_bus(bus); > - pcie_bus_configure_settings(bus); > acpiphp_set_acpi_region(slot); > > list_for_each_entry(dev, &bus->devices, bus_list) { > diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c > index 9e69403..93bc7f6 100644 > --- a/drivers/pci/hotplug/pciehp_pci.c > +++ b/drivers/pci/hotplug/pciehp_pci.c > @@ -65,7 +65,6 @@ int pciehp_configure_device(struct slot *p_slot) > pci_hp_add_bridge(dev); > > pci_assign_unassigned_bridge_resources(bridge); > - pcie_bus_configure_settings(parent); > pci_bus_add_devices(parent); > > out: > diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c > index f8cd3a2..ca3dc3c 100644 > --- a/drivers/pci/hotplug/shpchp_pci.c > +++ b/drivers/pci/hotplug/shpchp_pci.c > @@ -69,7 +69,6 @@ int shpchp_configure_device(struct slot *p_slot) > } > > pci_assign_unassigned_bridge_resources(bridge); > - pcie_bus_configure_settings(parent); > pci_bus_add_devices(parent); > > out: > diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c > index cefd636..b469298 100644 > --- a/drivers/pci/probe.c > +++ b/drivers/pci/probe.c > @@ -37,6 +37,9 @@ struct pci_domain_busn_res { > int domain_nr; > }; > > +static void pcie_bus_detect_mps(struct pci_dev *dev); > +static void pcie_bus_configure_settings(struct pci_bus *bus); > + > static struct resource *get_pci_domain_busn_res(int domain_nr) > { > struct pci_domain_busn_res *r; > @@ -929,6 +932,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) > (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"), > pci_domain_nr(bus), child->number); > > + pcie_bus_configure_settings(bus); > + > /* Has only triggered on CardBus, fixup is in yenta_socket */ > while (bus->parent) { > if ((child->busn_res.end > bus->busn_res.end) || > @@ -1589,6 +1594,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) > dev->match_driver = false; > ret = device_add(&dev->dev); > WARN_ON(ret < 0); > + > + if (pci_is_pcie(dev)) > + pcie_bus_detect_mps(dev); > } > > struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn) > @@ -1802,9 +1810,17 @@ static void pcie_bus_detect_mps(struct pci_dev *dev) > mps = pcie_get_mps(dev); > p_mps = pcie_get_mps(bridge); > > - if (mps != p_mps) > - dev_warn(&dev->dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", > - mps, pci_name(bridge), p_mps); > + if (mps != p_mps) { > + if (128 << dev->pcie_mpss < p_mps) { > + dev_warn(&dev->dev, > + "Max Payload Size Supported %d, but upstream %s set to %d. If problems are experienced, try running with pci=pcie_bus_safe\n", > + 128 << dev->pcie_mpss, pci_name(bridge), p_mps); > + return; Isn't this the same case where the above change to pci_bus_add_device() will now decline to add the device? So I think there are really two policy changes: 1) If an device can be configured to match the upstream bridge's MPS setting, do it, and 2) Don't add a device when its MPS setting doesn't match the upstream bridge I'd like those to be separate patches. > + } > + pcie_write_mps(dev, p_mps); > + dev_info(&dev->dev, "Max Payload Size set to %4d/%4d (was %4d)\n", > + pcie_get_mps(dev), 128 << dev->pcie_mpss, mps); > + } I assume this hunk is related to the policy change (from "do nothing" to "update the downstream port"). Can you split that policy change into its own separate minimal patch? Yes, I'm looking for minimal and specific bisect targets :) I think this will be clearer if you write it as: if (mps == p_mps) return; if (128 << dev->pcie_mpss < p_mps) { dev_warn(...); return; } pcie_write_mps(...); dev_info(...); Now that this actively updates the MPS setting, it's starting to grow beyond the original "pcie_bus_detect_mps()" function name. > } > > static int pcie_bus_configure_set(struct pci_dev *dev, void *data) > @@ -1836,7 +1852,7 @@ static int pcie_bus_configure_set(struct pci_dev *dev, void *data) > * parents then children fashion. If this changes, then this code will not > * work as designed. > */ > -void pcie_bus_configure_settings(struct pci_bus *bus) > +static void pcie_bus_configure_settings(struct pci_bus *bus) > { > u8 smpss = 0; > > @@ -1863,7 +1879,6 @@ void pcie_bus_configure_settings(struct pci_bus *bus) > pcie_bus_configure_set(bus->self, &smpss); > pci_walk_bus(bus, pcie_bus_configure_set, &smpss); > } > -EXPORT_SYMBOL_GPL(pcie_bus_configure_settings); > > unsigned int pci_scan_child_bus(struct pci_bus *bus) > { > @@ -1895,6 +1910,8 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus) > max = pci_scan_bridge(bus, dev, max, pass); > } > > + pcie_bus_configure_settings(bus); > + > /* > * We've scanned the bus and so we know all about what's on > * the other side of any bridges that may be on this bus plus > diff --git a/include/linux/pci.h b/include/linux/pci.h > index 8a0321a..e1df5f9 100644 > --- a/include/linux/pci.h > +++ b/include/linux/pci.h > @@ -735,8 +735,6 @@ struct pci_driver { > /* these external functions are only available when PCI support is enabled */ > #ifdef CONFIG_PCI > > -void pcie_bus_configure_settings(struct pci_bus *bus); > - > enum pcie_bus_config_types { > PCIE_BUS_TUNE_OFF, > PCIE_BUS_SAFE, > -- > 1.7.10.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, 17 Aug 2015, Bjorn Helgaas wrote: > On Wed, Jul 29, 2015 at 04:18:53PM -0600, Keith Busch wrote: >> The new pcie tuning will check the device's MPS against the parent bridge >> when it is initially added to the pci subsystem, prior to attaching >> to a driver. If MPS is mismatched, the downstream port is set to the >> parent bridge's if capable. > > This is a little confusing (at least, *I'm* confused). You're talking > about setting the MPS configuration of the "downstream port," but I > think you are talking about either a Switch Upstream Port or an > Endpoint. Such a port is indeed *downstream* from the parent bridge, > but referring to it as a "downstream port" risks confusing it with the > parent bridge, which is either a Switch Downstream Port or a Root > Port. Yes, the wording is confusing, yet you've managed to describe my intention, though. :) >> { >> int retval; >> >> + if (dev->bus->self && >> + pcie_get_mps(dev) != pcie_get_mps(dev->bus->self)) >> + return; > > This part looks like it could be in its own separate patch that > basically enforces the "if we can't safely configure this device's MPS > setting, prevent drivers from using the device" idea. What happens in > this case? Does the device still appear in sysfs and lspci, even if > we can't configure its MPS safely? This seems like good place for a > dev_warn(). It will remain in the pci topology and all the associated sysfs artifacts and lspic capabilities will be there. You could retune the whole topology from user space with "setpci" and do a rescan if you were so inclined, but that could cause problems if transactions are in-flight while re-tuning. A dev_warn will be produced when the device is initially scanned as you noted below, but another at this point might be useful to make it clear a driver will not be bound. The above is broken, though, for PCI device's that are not PCI-e, so need to fix that at the very least if we will enforce this. >> - if (mps != p_mps) >> - dev_warn(&dev->dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", >> - mps, pci_name(bridge), p_mps); >> + if (mps != p_mps) { >> + if (128 << dev->pcie_mpss < p_mps) { >> + dev_warn(&dev->dev, >> + "Max Payload Size Supported %d, but upstream %s set to %d. If problems are experienced, try running with pci=pcie_bus_safe\n", >> + 128 << dev->pcie_mpss, pci_name(bridge), p_mps); >> + return; > > Isn't this the same case where the above change to > pci_bus_add_device() will now decline to add the device? So I think > there are really two policy changes: > > 1) If an device can be configured to match the upstream bridge's MPS > setting, do it, and > > 2) Don't add a device when its MPS setting doesn't match the > upstream bridge > > I'd like those to be separate patches. Ok. >> + } >> + pcie_write_mps(dev, p_mps); >> + dev_info(&dev->dev, "Max Payload Size set to %4d/%4d (was %4d)\n", >> + pcie_get_mps(dev), 128 << dev->pcie_mpss, mps); >> + } > > I assume this hunk is related to the policy change (from "do nothing" > to "update the downstream port"). Can you split that policy change > into its own separate minimal patch? Yes, I'm looking for minimal and > specific bisect targets :) > > I think this will be clearer if you write it as: > > if (mps == p_mps) > return; > > if (128 << dev->pcie_mpss < p_mps) { > dev_warn(...); > return; > } > > pcie_write_mps(...); > dev_info(...); > > Now that this actively updates the MPS setting, it's starting to grow > beyond the original "pcie_bus_detect_mps()" function name. Agreed that's a cleaner flow. Thanks for all the feedback. Will work on a revision this week. -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index fcbbbb1..4fff58e 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -537,18 +537,6 @@ void pci_common_init_dev(struct device *parent, struct hw_pci *hw) */ pci_bus_add_devices(bus); } - - list_for_each_entry(sys, &head, node) { - struct pci_bus *bus = sys->bus; - - /* Configure PCI Express settings */ - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { - struct pci_bus *child; - - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); - } - } } #ifndef CONFIG_PCI_HOST_ITE8152 diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index b9de34d..7f27ffe 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1682,13 +1682,6 @@ void pcibios_scan_phb(struct pci_controller *hose) */ if (ppc_md.pcibios_fixup_phb) ppc_md.pcibios_fixup_phb(hose); - - /* Configure PCI Express settings */ - if (bus && !pci_has_flag(PCI_PROBE_ONLY)) { - struct pci_bus *child; - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); - } } EXPORT_SYMBOL_GPL(pcibios_scan_phb); diff --git a/arch/tile/kernel/pci_gx.c b/arch/tile/kernel/pci_gx.c index b1df847..67492fb 100644 --- a/arch/tile/kernel/pci_gx.c +++ b/arch/tile/kernel/pci_gx.c @@ -599,10 +599,6 @@ static void fixup_read_and_payload_sizes(struct pci_controller *controller) __gxio_mmio_write32(trio_context->mmio_base_mac + reg_offset, rc_dev_cap.word); - /* Configure PCI Express MPS setting. */ - list_for_each_entry(child, &root_bus->children, node) - pcie_bus_configure_settings(child); - /* * Set the mac_config register in trio based on the MPS/MRS of the link. */ diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index ff99117..ab5977a 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -478,15 +478,6 @@ struct pci_bus *pci_acpi_scan_root(struct acpi_pci_root *root) } } - /* After the PCI-E bus has been walked and all devices discovered, - * configure any settings of the fabric that might be necessary. - */ - if (bus) { - struct pci_bus *child; - list_for_each_entry(child, &bus->children, node) - pcie_bus_configure_settings(child); - } - if (bus && node != NUMA_NO_NODE) dev_printk(KERN_DEBUG, &bus->dev, "on NUMA node %d\n", node); diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 6fbd3f2..8f8428a 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -277,6 +277,10 @@ void pci_bus_add_device(struct pci_dev *dev) { int retval; + if (dev->bus->self && + pcie_get_mps(dev) != pcie_get_mps(dev->bus->self)) + return; + /* * Can not put in pci_device_add yet because resources * are not assigned yet for some devices. diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index ff53856..cd98649 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -509,7 +509,6 @@ static void enable_slot(struct acpiphp_slot *slot) __pci_bus_assign_resources(bus, &add_list, NULL); acpiphp_sanitize_bus(bus); - pcie_bus_configure_settings(bus); acpiphp_set_acpi_region(slot); list_for_each_entry(dev, &bus->devices, bus_list) { diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index 9e69403..93bc7f6 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -65,7 +65,6 @@ int pciehp_configure_device(struct slot *p_slot) pci_hp_add_bridge(dev); pci_assign_unassigned_bridge_resources(bridge); - pcie_bus_configure_settings(parent); pci_bus_add_devices(parent); out: diff --git a/drivers/pci/hotplug/shpchp_pci.c b/drivers/pci/hotplug/shpchp_pci.c index f8cd3a2..ca3dc3c 100644 --- a/drivers/pci/hotplug/shpchp_pci.c +++ b/drivers/pci/hotplug/shpchp_pci.c @@ -69,7 +69,6 @@ int shpchp_configure_device(struct slot *p_slot) } pci_assign_unassigned_bridge_resources(bridge); - pcie_bus_configure_settings(parent); pci_bus_add_devices(parent); out: diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index cefd636..b469298 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -37,6 +37,9 @@ struct pci_domain_busn_res { int domain_nr; }; +static void pcie_bus_detect_mps(struct pci_dev *dev); +static void pcie_bus_configure_settings(struct pci_bus *bus); + static struct resource *get_pci_domain_busn_res(int domain_nr) { struct pci_domain_busn_res *r; @@ -929,6 +932,8 @@ int pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int pass) (is_cardbus ? "PCI CardBus %04x:%02x" : "PCI Bus %04x:%02x"), pci_domain_nr(bus), child->number); + pcie_bus_configure_settings(bus); + /* Has only triggered on CardBus, fixup is in yenta_socket */ while (bus->parent) { if ((child->busn_res.end > bus->busn_res.end) || @@ -1589,6 +1594,9 @@ void pci_device_add(struct pci_dev *dev, struct pci_bus *bus) dev->match_driver = false; ret = device_add(&dev->dev); WARN_ON(ret < 0); + + if (pci_is_pcie(dev)) + pcie_bus_detect_mps(dev); } struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn) @@ -1802,9 +1810,17 @@ static void pcie_bus_detect_mps(struct pci_dev *dev) mps = pcie_get_mps(dev); p_mps = pcie_get_mps(bridge); - if (mps != p_mps) - dev_warn(&dev->dev, "Max Payload Size %d, but upstream %s set to %d; if necessary, use \"pci=pcie_bus_safe\" and report a bug\n", - mps, pci_name(bridge), p_mps); + if (mps != p_mps) { + if (128 << dev->pcie_mpss < p_mps) { + dev_warn(&dev->dev, + "Max Payload Size Supported %d, but upstream %s set to %d. If problems are experienced, try running with pci=pcie_bus_safe\n", + 128 << dev->pcie_mpss, pci_name(bridge), p_mps); + return; + } + pcie_write_mps(dev, p_mps); + dev_info(&dev->dev, "Max Payload Size set to %4d/%4d (was %4d)\n", + pcie_get_mps(dev), 128 << dev->pcie_mpss, mps); + } } static int pcie_bus_configure_set(struct pci_dev *dev, void *data) @@ -1836,7 +1852,7 @@ static int pcie_bus_configure_set(struct pci_dev *dev, void *data) * parents then children fashion. If this changes, then this code will not * work as designed. */ -void pcie_bus_configure_settings(struct pci_bus *bus) +static void pcie_bus_configure_settings(struct pci_bus *bus) { u8 smpss = 0; @@ -1863,7 +1879,6 @@ void pcie_bus_configure_settings(struct pci_bus *bus) pcie_bus_configure_set(bus->self, &smpss); pci_walk_bus(bus, pcie_bus_configure_set, &smpss); } -EXPORT_SYMBOL_GPL(pcie_bus_configure_settings); unsigned int pci_scan_child_bus(struct pci_bus *bus) { @@ -1895,6 +1910,8 @@ unsigned int pci_scan_child_bus(struct pci_bus *bus) max = pci_scan_bridge(bus, dev, max, pass); } + pcie_bus_configure_settings(bus); + /* * We've scanned the bus and so we know all about what's on * the other side of any bridges that may be on this bus plus diff --git a/include/linux/pci.h b/include/linux/pci.h index 8a0321a..e1df5f9 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -735,8 +735,6 @@ struct pci_driver { /* these external functions are only available when PCI support is enabled */ #ifdef CONFIG_PCI -void pcie_bus_configure_settings(struct pci_bus *bus); - enum pcie_bus_config_types { PCIE_BUS_TUNE_OFF, PCIE_BUS_SAFE,
A hot plugged PCI-e device max payload size (MPS) defaults to 0 for 128bytes. The device is not usable if the upstream port is configured to a higher setting. Bus configuration was previously done by arch specific and hot plug code after the root port or bridge was scanned, and default behavior logged a warning without changing the setting if there was a problem. This patch unifies tuning with a default policy that affects only misconfigured downstream devices, and preserves existing end result if a non-default bus tuning is used (ex: pci=pcie_bus_safe). The new pcie tuning will check the device's MPS against the parent bridge when it is initially added to the pci subsystem, prior to attaching to a driver. If MPS is mismatched, the downstream port is set to the parent bridge's if capable. This is safe to change here since the device being configured is not bound to a driver and does not affect previously configured devices in the domain hierarchy. A device incapable of matching the upstream bridge will log a warning message and not bind to a driver. This is the safe option since proper MPS configuration must consider the entire hierarchy between communicating end points, and we can't safely modify a root port's subtree MPS settings while it is in use. Since the bus is configured everytime a bridge is scanned, this potentially creates unnecessary re-walking of an already configured sub-tree, but the code only executes during root port initialization, hot adding a switch, or explicit request to rescan. Signed-off-by: Keith Busch <keith.busch@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Austin Bolen <Austin_Bolen@Dell.com> Cc: Myron Stowe <mstowe@redhat.com> Cc: Jon Mason <jdmason@kudzu.us> Cc: Bjorn Helgaas <bhelgaas@google.com> --- arch/arm/kernel/bios32.c | 12 ------------ arch/powerpc/kernel/pci-common.c | 7 ------- arch/tile/kernel/pci_gx.c | 4 ---- arch/x86/pci/acpi.c | 9 --------- drivers/pci/bus.c | 4 ++++ drivers/pci/hotplug/acpiphp_glue.c | 1 - drivers/pci/hotplug/pciehp_pci.c | 1 - drivers/pci/hotplug/shpchp_pci.c | 1 - drivers/pci/probe.c | 27 ++++++++++++++++++++++----- include/linux/pci.h | 2 -- 10 files changed, 26 insertions(+), 42 deletions(-)