| Message ID | 1271054596-26561-2-git-send-email-imunsie@au.ibm.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
Hi Ian, Ian Munsie wrote: > From: Ian Munsie <imunsie@au.ibm.com> > > The perf userspace tool included some architecture specific code to map > registers from the DWARF register number into the names used by the regs > and stack access API. > > This patch moves the architecture specific code out into a seperate > arch/x86 directory along with the infrastructure required to use it. Nice! :) I have just some comments on it. > > Signed-off-by: Ian Munsie <imunsie@au.ibm.com> > --- > tools/perf/Makefile | 18 ++++++- > tools/perf/arch/x86/Makefile | 1 + > tools/perf/arch/x86/include/arch_dwarf-regs.h | 6 ++ > tools/perf/arch/x86/util/dwarf-regs.c | 75 +++++++++++++++++++++++++ > tools/perf/util/include/dwarf-regs.h | 8 +++ > tools/perf/util/probe-finder.c | 55 ++---------------- > 6 files changed, 113 insertions(+), 50 deletions(-) > create mode 100644 tools/perf/arch/x86/Makefile > create mode 100644 tools/perf/arch/x86/include/arch_dwarf-regs.h > create mode 100644 tools/perf/arch/x86/util/dwarf-regs.c > create mode 100644 tools/perf/util/include/dwarf-regs.h > > diff --git a/tools/perf/Makefile b/tools/perf/Makefile > index f578b05..07a6ee2 100644 > --- a/tools/perf/Makefile > +++ b/tools/perf/Makefile > @@ -172,6 +172,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not') > uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not') > uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not') > > +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ > + -e s/arm.*/arm/ -e s/sa110/arm/ \ > + -e s/s390x/s390/ -e s/parisc64/parisc/ \ > + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ > + -e s/sh[234].*/sh/ ) > + > +# Additional ARCH settings for x86 > +ifeq ($(ARCH),i386) > + ARCH := x86 > +endif > +ifeq ($(ARCH),x86_64) > + ARCH := x86 > +endif > + > # CFLAGS and LDFLAGS are for the users to override from the command line. > > # > @@ -284,7 +298,7 @@ endif > # Those must not be GNU-specific; they are shared with perl/ which may > # be built by a different compiler. (Note that this is an artifact now > # but it still might be nice to keep that distinction.) > -BASIC_CFLAGS = -Iutil/include > +BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include > BASIC_LDFLAGS = > > # Guard against environment variables > @@ -366,6 +380,7 @@ LIB_H += util/include/asm/byteorder.h > LIB_H += util/include/asm/swab.h > LIB_H += util/include/asm/system.h > LIB_H += util/include/asm/uaccess.h > +LIB_H += util/include/dwarf-regs.h > LIB_H += perf.h > LIB_H += util/cache.h > LIB_H += util/callchain.h > @@ -484,6 +499,7 @@ PERFLIBS = $(LIB_FILE) > > -include config.mak.autogen > -include config.mak > +-include arch/$(ARCH)/Makefile > > ifeq ($(uname_S),Darwin) > ifndef NO_FINK Could you add a check whether the get_arch_regstr() is defined (or dwarf-regs.h is exist) in Makefile? If it is not defined, we'd better drop dwarf support(so set NO_DWARF), because it means we haven't ported perf probe on that architecture yet. :) > diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile > new file mode 100644 > index 0000000..1191403 > --- /dev/null > +++ b/tools/perf/arch/x86/Makefile > @@ -0,0 +1 @@ > +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o > diff --git a/tools/perf/arch/x86/include/arch_dwarf-regs.h b/tools/perf/arch/x86/include/arch_dwarf-regs.h > new file mode 100644 > index 0000000..9e8da6a > --- /dev/null > +++ b/tools/perf/arch/x86/include/arch_dwarf-regs.h > @@ -0,0 +1,6 @@ > +#ifndef _PREF_ARCH_PPC_DWARF_REGS_H > +#define _PREF_ARCH_PPC_DWARF_REGS_H _PREF_ARCH_X86_DWARF_REGS_H ? > + > +#define get_arch_regstr(n) get_arch_regstr(n) If we checked above dwarf support, we don't need this odd macro. > + > +#endif > diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c > new file mode 100644 > index 0000000..a794d30 > --- /dev/null > +++ b/tools/perf/arch/x86/util/dwarf-regs.c > @@ -0,0 +1,75 @@ > +/* > + * dwarf-regs.c : Mapping of DWARF debug register numbers into register names. > + * Extracted from probe-finder.c > + * > + * Written by Masami Hiramatsu <mhiramat@redhat.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. > + * > + */ > + > +#include <libio.h> > +#include <dwarf-regs.h> > + > +/* > + * Generic dwarf analysis helpers > + */ > + > +#define X86_32_MAX_REGS 8 > +const char *x86_32_regs_table[X86_32_MAX_REGS] = { > + "%ax", > + "%cx", > + "%dx", > + "%bx", > + "$stack", /* Stack address instead of %sp */ > + "%bp", > + "%si", > + "%di", > +}; > + > +#define X86_64_MAX_REGS 16 > +const char *x86_64_regs_table[X86_64_MAX_REGS] = { > + "%ax", > + "%dx", > + "%cx", > + "%bx", > + "%si", > + "%di", > + "%bp", > + "%sp", > + "%r8", > + "%r9", > + "%r10", > + "%r11", > + "%r12", > + "%r13", > + "%r14", > + "%r15", > +}; > + > +/* TODO: switching by dwarf address size */ > +#ifdef __x86_64__ > +#define ARCH_MAX_REGS X86_64_MAX_REGS > +#define arch_regs_table x86_64_regs_table > +#else > +#define ARCH_MAX_REGS X86_32_MAX_REGS > +#define arch_regs_table x86_32_regs_table > +#endif > + > +/* Return architecture dependent register string (for kprobe-tracer) */ > +const char *get_arch_regstr(unsigned int n) > +{ > + return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; > +} > diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h > new file mode 100644 > index 0000000..2a1cf6f > --- /dev/null > +++ b/tools/perf/util/include/dwarf-regs.h > @@ -0,0 +1,8 @@ > +#ifndef _PERF_DWARF_REGS_H_ > +#define _PERF_DWARF_REGS_H_ > + > +#include <arch_dwarf-regs.h> > + > +const char *get_arch_regstr(unsigned int n); > + > +#endif > diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c > index a851377..27020fe 100644 > --- a/tools/perf/util/probe-finder.c > +++ b/tools/perf/util/probe-finder.c > @@ -31,6 +31,7 @@ > #include <string.h> > #include <stdarg.h> > #include <ctype.h> > +#include <dwarf-regs.h> > > #include "string.h" > #include "event.h" > @@ -38,57 +39,13 @@ > #include "util.h" > #include "probe-finder.h" > > - > -/* > - * Generic dwarf analysis helpers > - */ > - > -#define X86_32_MAX_REGS 8 > -const char *x86_32_regs_table[X86_32_MAX_REGS] = { > - "%ax", > - "%cx", > - "%dx", > - "%bx", > - "$stack", /* Stack address instead of %sp */ > - "%bp", > - "%si", > - "%di", > -}; > - > -#define X86_64_MAX_REGS 16 > -const char *x86_64_regs_table[X86_64_MAX_REGS] = { > - "%ax", > - "%dx", > - "%cx", > - "%bx", > - "%si", > - "%di", > - "%bp", > - "%sp", > - "%r8", > - "%r9", > - "%r10", > - "%r11", > - "%r12", > - "%r13", > - "%r14", > - "%r15", > -}; > - > -/* TODO: switching by dwarf address size */ > -#ifdef __x86_64__ > -#define ARCH_MAX_REGS X86_64_MAX_REGS > -#define arch_regs_table x86_64_regs_table > -#else > -#define ARCH_MAX_REGS X86_32_MAX_REGS > -#define arch_regs_table x86_32_regs_table > -#endif > - > /* Return architecture dependent register string (for kprobe-tracer) */ > -static const char *get_arch_regstr(unsigned int n) > +#ifndef get_arch_regstr > +const char *get_arch_regstr(unsigned int n __attribute__((unused))) > { > - return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; > + return NULL; > } > +#endif Again, if we add a check in Makefile, we can remove this completely. > > /* > * Compare the tail of two strings. > @@ -397,7 +354,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf) > > regs = get_arch_regstr(regn); > if (!regs) > - die("%u exceeds max register number.", regn); > + die("Mapping for DWARF register number %u missing on this architecture.", regn); > > tvar->value = xstrdup(regs); > if (ref) { Thank you,
Hi Masami, Thanks for the feedback Excerpts from Masami Hiramatsu's message of Mon Apr 12 22:37:03 +1000 2010: > Could you add a check whether the get_arch_regstr() is defined > (or dwarf-regs.h is exist) in Makefile? > If it is not defined, we'd better drop dwarf support(so set NO_DWARF), > because it means we haven't ported perf probe on that architecture yet. :) I was a little reluctant to do that when I first read your message because it felt like adding autoconf stuff into the Makefile and the code should already fail gracefully on architectures without the register mappings. But, since the Makefile already has some autoconf like magic and it would make the code cleaner, I'll play with the idea a bit more tomorrow. > > diff --git a/tools/perf/arch/x86/include/arch_dwarf-regs.h b/tools/perf/arch/x86/include/arch_dwarf-regs.h > > new file mode 100644 > > index 0000000..9e8da6a > > --- /dev/null > > +++ b/tools/perf/arch/x86/include/arch_dwarf-regs.h > > @@ -0,0 +1,6 @@ > > +#ifndef _PREF_ARCH_PPC_DWARF_REGS_H > > +#define _PREF_ARCH_PPC_DWARF_REGS_H > > _PREF_ARCH_X86_DWARF_REGS_H ? Nice catch (oops) Cheers, -Ian
diff --git a/tools/perf/Makefile b/tools/perf/Makefile index f578b05..07a6ee2 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -172,6 +172,20 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not') uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not') uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not') +ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \ + -e s/arm.*/arm/ -e s/sa110/arm/ \ + -e s/s390x/s390/ -e s/parisc64/parisc/ \ + -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \ + -e s/sh[234].*/sh/ ) + +# Additional ARCH settings for x86 +ifeq ($(ARCH),i386) + ARCH := x86 +endif +ifeq ($(ARCH),x86_64) + ARCH := x86 +endif + # CFLAGS and LDFLAGS are for the users to override from the command line. # @@ -284,7 +298,7 @@ endif # Those must not be GNU-specific; they are shared with perl/ which may # be built by a different compiler. (Note that this is an artifact now # but it still might be nice to keep that distinction.) -BASIC_CFLAGS = -Iutil/include +BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include BASIC_LDFLAGS = # Guard against environment variables @@ -366,6 +380,7 @@ LIB_H += util/include/asm/byteorder.h LIB_H += util/include/asm/swab.h LIB_H += util/include/asm/system.h LIB_H += util/include/asm/uaccess.h +LIB_H += util/include/dwarf-regs.h LIB_H += perf.h LIB_H += util/cache.h LIB_H += util/callchain.h @@ -484,6 +499,7 @@ PERFLIBS = $(LIB_FILE) -include config.mak.autogen -include config.mak +-include arch/$(ARCH)/Makefile ifeq ($(uname_S),Darwin) ifndef NO_FINK diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile new file mode 100644 index 0000000..1191403 --- /dev/null +++ b/tools/perf/arch/x86/Makefile @@ -0,0 +1 @@ +LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o diff --git a/tools/perf/arch/x86/include/arch_dwarf-regs.h b/tools/perf/arch/x86/include/arch_dwarf-regs.h new file mode 100644 index 0000000..9e8da6a --- /dev/null +++ b/tools/perf/arch/x86/include/arch_dwarf-regs.h @@ -0,0 +1,6 @@ +#ifndef _PREF_ARCH_PPC_DWARF_REGS_H +#define _PREF_ARCH_PPC_DWARF_REGS_H + +#define get_arch_regstr(n) get_arch_regstr(n) + +#endif diff --git a/tools/perf/arch/x86/util/dwarf-regs.c b/tools/perf/arch/x86/util/dwarf-regs.c new file mode 100644 index 0000000..a794d30 --- /dev/null +++ b/tools/perf/arch/x86/util/dwarf-regs.c @@ -0,0 +1,75 @@ +/* + * dwarf-regs.c : Mapping of DWARF debug register numbers into register names. + * Extracted from probe-finder.c + * + * Written by Masami Hiramatsu <mhiramat@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#include <libio.h> +#include <dwarf-regs.h> + +/* + * Generic dwarf analysis helpers + */ + +#define X86_32_MAX_REGS 8 +const char *x86_32_regs_table[X86_32_MAX_REGS] = { + "%ax", + "%cx", + "%dx", + "%bx", + "$stack", /* Stack address instead of %sp */ + "%bp", + "%si", + "%di", +}; + +#define X86_64_MAX_REGS 16 +const char *x86_64_regs_table[X86_64_MAX_REGS] = { + "%ax", + "%dx", + "%cx", + "%bx", + "%si", + "%di", + "%bp", + "%sp", + "%r8", + "%r9", + "%r10", + "%r11", + "%r12", + "%r13", + "%r14", + "%r15", +}; + +/* TODO: switching by dwarf address size */ +#ifdef __x86_64__ +#define ARCH_MAX_REGS X86_64_MAX_REGS +#define arch_regs_table x86_64_regs_table +#else +#define ARCH_MAX_REGS X86_32_MAX_REGS +#define arch_regs_table x86_32_regs_table +#endif + +/* Return architecture dependent register string (for kprobe-tracer) */ +const char *get_arch_regstr(unsigned int n) +{ + return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; +} diff --git a/tools/perf/util/include/dwarf-regs.h b/tools/perf/util/include/dwarf-regs.h new file mode 100644 index 0000000..2a1cf6f --- /dev/null +++ b/tools/perf/util/include/dwarf-regs.h @@ -0,0 +1,8 @@ +#ifndef _PERF_DWARF_REGS_H_ +#define _PERF_DWARF_REGS_H_ + +#include <arch_dwarf-regs.h> + +const char *get_arch_regstr(unsigned int n); + +#endif diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index a851377..27020fe 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -31,6 +31,7 @@ #include <string.h> #include <stdarg.h> #include <ctype.h> +#include <dwarf-regs.h> #include "string.h" #include "event.h" @@ -38,57 +39,13 @@ #include "util.h" #include "probe-finder.h" - -/* - * Generic dwarf analysis helpers - */ - -#define X86_32_MAX_REGS 8 -const char *x86_32_regs_table[X86_32_MAX_REGS] = { - "%ax", - "%cx", - "%dx", - "%bx", - "$stack", /* Stack address instead of %sp */ - "%bp", - "%si", - "%di", -}; - -#define X86_64_MAX_REGS 16 -const char *x86_64_regs_table[X86_64_MAX_REGS] = { - "%ax", - "%dx", - "%cx", - "%bx", - "%si", - "%di", - "%bp", - "%sp", - "%r8", - "%r9", - "%r10", - "%r11", - "%r12", - "%r13", - "%r14", - "%r15", -}; - -/* TODO: switching by dwarf address size */ -#ifdef __x86_64__ -#define ARCH_MAX_REGS X86_64_MAX_REGS -#define arch_regs_table x86_64_regs_table -#else -#define ARCH_MAX_REGS X86_32_MAX_REGS -#define arch_regs_table x86_32_regs_table -#endif - /* Return architecture dependent register string (for kprobe-tracer) */ -static const char *get_arch_regstr(unsigned int n) +#ifndef get_arch_regstr +const char *get_arch_regstr(unsigned int n __attribute__((unused))) { - return (n <= ARCH_MAX_REGS) ? arch_regs_table[n] : NULL; + return NULL; } +#endif /* * Compare the tail of two strings. @@ -397,7 +354,7 @@ static void convert_location(Dwarf_Op *op, struct probe_finder *pf) regs = get_arch_regstr(regn); if (!regs) - die("%u exceeds max register number.", regn); + die("Mapping for DWARF register number %u missing on this architecture.", regn); tvar->value = xstrdup(regs); if (ref) {