diff mbox

[U-Boot,04/19] ARM: zynq: DT: Migrate UART to Cadence binding

Message ID ef6a584ceec9b113927793bfe024bb73a157f562.1437579483.git.michal.simek@xilinx.com
State Accepted
Delegated to: Michal Simek
Headers show

Commit Message

Michal Simek July 22, 2015, 3:37 p.m. UTC 
The Zynq UART is Cadence IP and the driver has been renamed accordingly.
Migrate the DT to use the new binding for the UART driver.

Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Michal Simek <michal.simek@xilinx.com>

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---

Mainline sync

---
 arch/arm/dts/zynq-7000.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/dts/zynq-7000.dtsi b/arch/arm/dts/zynq-7000.dtsi
index 326ab6766c56..a4bfc6211100 100644
--- a/arch/arm/dts/zynq-7000.dtsi
+++ b/arch/arm/dts/zynq-7000.dtsi
@@ -149,19 +149,19 @@ 
 		};
 
 		uart0: serial@e0000000 {
-			compatible = "xlnx,xuartps";
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
 			clocks = <&clkc 23>, <&clkc 40>;
-			clock-names = "ref_clk", "aper_clk";
+			clock-names = "uart_clk", "pclk";
 			reg = <0xE0000000 0x1000>;
 			interrupts = <0 27 4>;
 		};
 
 		uart1: serial@e0001000 {
-			compatible = "xlnx,xuartps";
+			compatible = "xlnx,xuartps", "cdns,uart-r1p8";
 			status = "disabled";
 			clocks = <&clkc 24>, <&clkc 41>;
-			clock-names = "ref_clk", "aper_clk";
+			clock-names = "uart_clk", "pclk";
 			reg = <0xE0001000 0x1000>;
 			interrupts = <0 50 4>;
 		};