diff mbox

[U-Boot] layerscape: sata: Add layerscape sata support

Message ID 1437448200-17694-1-git-send-email-Yuantian.Tang@freescale.com
State Superseded
Headers show

Commit Message

tang yuantian July 21, 2015, 3:10 a.m. UTC 
From: Tang Yuantian <Yuantian.Tang@freescale.com>

Freescale ARM-based Layerscape SoCs contain a SATA controller
which comply with the serial ATA 3.0 specification and the
AHCI 1.3 specification.
This patch adds some basic SATA APIs which would be called by
specific board.

Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com>
---
 board/freescale/common/Makefile  |  6 +++++
 board/freescale/common/ls_sata.c | 52 ++++++++++++++++++++++++++++++++++++++++
 board/freescale/common/ls_sata.h | 39 ++++++++++++++++++++++++++++++
 3 files changed, 97 insertions(+)
 create mode 100644 board/freescale/common/ls_sata.c
 create mode 100644 board/freescale/common/ls_sata.h
diff mbox

Patch

diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 87d0578..8508005 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -43,6 +43,12 @@  else
 obj-$(CONFIG_DEEP_SLEEP)		+= mpc85xx_sleep.o
 endif
 
+ifdef CONFIG_ARM
+ifdef CONFIG_SATA1
+obj-y += ls_sata.o
+endif
+endif
+
 obj-$(CONFIG_FSL_DCU_SII9022A)    += dcu_sii9022a.o
 
 obj-$(CONFIG_MPC8541CDS)	+= cds_pci_ft.o
diff --git a/board/freescale/common/ls_sata.c b/board/freescale/common/ls_sata.c
new file mode 100644
index 0000000..2aab939
--- /dev/null
+++ b/board/freescale/common/ls_sata.c
@@ -0,0 +1,52 @@ 
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <ahci.h>
+#include <scsi.h>
+
+#include "ls_sata.h"
+
+void ls_sata_init(void)
+{
+	struct ccsr_ahci __iomem *ccsr_ahci;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A008407
+	unsigned int __iomem *dcfg_ecc = (void *)0x20220520;
+	out_le32(dcfg_ecc, 0x00020000);
+#endif
+
+#ifdef CONFIG_SATA2
+	ccsr_ahci = (void __iomem *)CONFIG_SYS_SATA2;
+	out_le32(&ccsr_ahci->ppcfg, 0xa003fffe);
+#endif
+
+#ifdef CONFIG_SATA1
+	ccsr_ahci = (void __iomem *)CONFIG_SYS_SATA1;
+	out_le32(&ccsr_ahci->ppcfg, 0xa003fffe);
+#ifdef CONFIG_LS102XA
+	out_le32(&ccsr_ahci->pp2c, 0x28183411);
+	out_le32(&ccsr_ahci->pp3c, 0x0e081004);
+	out_le32(&ccsr_ahci->pp4c, 0x00480811);
+	out_le32(&ccsr_ahci->pp5c, 0x192c96a4);
+	out_le32(&ccsr_ahci->ptc, 0x08000025);
+#endif
+#endif
+}
+
+int ls_sata_start(void)
+{
+	int rc;
+
+	rc = ahci_init((void *)CONFIG_SYS_SATA1);
+	if (rc)
+		return rc;
+
+	scsi_scan(0);
+
+	return 0;
+}
diff --git a/board/freescale/common/ls_sata.h b/board/freescale/common/ls_sata.h
new file mode 100644
index 0000000..a69854c
--- /dev/null
+++ b/board/freescale/common/ls_sata.h
@@ -0,0 +1,39 @@ 
+/*
+ * Copyright 2015 Freescale Semiconductor, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __LS_SATA_H
+#define __LS_SATA_H
+
+/* AHCI (sata) register map */
+struct ccsr_ahci {
+	u32 res1[0xa4/4];	/* 0x0 - 0xa4 */
+	u32 pcfg;	/* port config */
+	u32 ppcfg;	/* port phy1 config */
+	u32 pp2c;	/* port phy2 config */
+	u32 pp3c;	/* port phy3 config */
+	u32 pp4c;	/* port phy4 config */
+	u32 pp5c;	/* port phy5 config */
+	u32 paxic;	/* port AXI config */
+	u32 axicc;	/* AXI cache control */
+	u32 axipc;	/* AXI PROT control */
+	u32 ptc;	/* port Trans Config */
+	u32 pts;	/* port Trans Status */
+	u32 plc;	/* port link config */
+	u32 plc1;	/* port link config1 */
+	u32 plc2;	/* port link config2 */
+	u32 pls;	/* port link status */
+	u32 pls1;	/* port link status1 */
+	u32 pcmdc;	/* port CMD config */
+	u32 ppcs;	/* port phy control status */
+	u32 pberr;	/* port 0/1 BIST error */
+	u32 cmds;	/* port 0/1 CMD status error */
+};
+
+void ls_sata_init(void);
+
+int ls_sata_start(void);
+
+#endif